If you are interested in the Kaleo brand, you can always buy underfloor heating of this manufacturer at an affordable cost. This system is a universal film suitable for any type of topcoat. If you are faced with the task of quickly installing a heating system, then the described option will be the best solution. It is not necessary to start repairs for this, you can lay the warm floor where necessary. This may concern the coolest places in the room. A similar system is also suitable for wooden coatings, it is able to create a uniform and gentle heating. The thickness of the system is 0.42 mm.
Description of the film floor heating system
Recently, the Kaleo brand has become quite common, the warm floors of this company are a two-layer thermofilm, inside which there are carbon heating elements, as well as a copper bus. It is located along the film. In the process of connecting to the power grid, the coating begins to study anionic particles and long-range infrared rays. Electricity is supplied by copper wires. But the connection of thermal film to the network is done in a parallel way. A underfloor heating substrate is necessary and used to ensure that the heating element directs the heat flow to the floor. The substrate has reflective characteristics. That is why when laying the system you can not worry about the fact that the ceiling at the neighbors will also warm
Positive characteristics
On sale today you can find products in a wide assortment of the Kaleo brand, underfloor heating is no exception. Before buying, it is worth considering the main advantages and disadvantages of the described system. Among the former, one can single out ease of installation, profitability and maximum safety, the latter of which is confirmed by comparison with other systems. Any home master can make installation work in just 3 hours. Savings are manifested not only during installation, but also during operation. Installation does not involve the arrangement of screed, as well as the use of all kinds of mastics and glue, which will save finances. If you decide to choose a product of the Kaleo brand, you can purchase underfloor heating of the given manufacturer in the right footage, and then divide the film into a certain number of modules. After the installation has been completed, you will be able to save energy, since when operating such systems, the amount of bills is reduced by 20%.
Quite often, modern consumers are especially worried about security. Infrared heaters in this regard are a more suitable option compared to electric underfloor heating.
Reviews on the durability of the infrared floor heating system
The manufacturer uses patented technologies in the manufacture of the described systems, which allows for almost trouble-free operation for a long time. Consumer reviews act as confirmation. As practice shows, even with mechanical damage, only individual sections and strips fail. The rest of the system continues to work properly. Consumers emphasize that the film does not corrode. And the manufacturer provides a guarantee for 15 years.
Installation Recommendations
You can install the Kaleo infrared floor heating on your own. It can be laid under parquet or laminate, but in this case it will be necessary to lay a plastic film, it will protect the system from moisture. Initially, you need to check how durable the rough coating is, after the master starts laying the reflector, which can be Izolon. When you fit the Kaleo warm floor, the reviews of which were presented above, at the next stage you can start laying the film itself, the next layer will be polyethylene. A laminate or parquet board is laid on top. If you chose linoleum or carpet as a topcoat, then fiberboard or plywood must be placed on top of the polyethylene, this is done to prevent damage to the thermal film.
The method of laying a warm floor under linoleum or carpet
The Kaleo film underfloor heating will function perfectly under the aforementioned decorative coatings. Initially, it is necessary to check the quality of the rough coating or screed. The heat-reflecting material should follow, as in the case described above. On top of it is a Caleo film, and after all the layers are covered with a plastic film. Fibreboard or plywood follows, and the final coating will be decorative: linoleum or carpet.
The nuances of laying tiles
At the first stage, materials are prepared, namely a set of underfloor heating, as well as film, adhesive tape and fiberboard. Experts especially emphasize that it is forbidden to use materials based on aluminum foil. It is important to determine the surface area on which the warm floor will be located. After this, you can begin to cover the heat-reflecting material. Thermofilm unfolds on top without air gap.
After that, the thermostat is installed. It is also important to remember the need to lay the installation wires, after the wizard determines the location of the stripping. The next step will be the connection of wires and thermal film. It is important to isolate the connection points well.
Conclusion
Warm floors "Kaleo", the installation of which you can carry out independently, must be connected to a thermostat. The latter is connected to the electrical network. Before you complete the work, the system will have to be tested, only after you can lay a plastic film on top. The final step will be the laying of the finish floor covering. It should be remembered that not every coating can be used for this.