With the onset of summer, all urban residents are faced with a massive shutdown of hot water. This can not please, because it brings many inconveniences. In order to survive the interruptions in the water supply and not to count the days when the next preventive maintenance will be completed, it is better to consider the Electrolux instantaneous water heaters in the store.
This equipment has an advantage when compared with storage devices. First of all, such units have less impressive dimensions, are cheaper, and also quite easy to install. Among other things, the system does not accumulate water, but heats it during direct use. This indicates that the resource is not limited by the size of the tank.
Reviews about the brand Smartfix 2.0 water heater
Flowing water heaters "Electrolux" today are widely popular among consumers. You can follow the experience of many users by buying a water heater of the aforementioned brand, which includes a shower and a faucet. According to the owners of apartments and private houses, this version of the water heater has a sleek design and high performance. It heats water in a short time through the use of powerful heating elements made of copper.
This appliance can be used to provide only one intake point with water. Flowing water heater "Electrolux Smartfix" has a hydraulic control system, which, according to users, allows you to maintain the temperature of the liquid, depending on the settings of the mixer and the flow rate. It will be very convenient to operate the device, as it is equipped with a function of automatically turning off and on when closing and opening a water tap. As users emphasize, this model has three power modes, which allows to increase productivity and save energy.
SmartFix 2.0 TS Safety and Usability Reviews
The flowing water heater "Electrolux-Smartfix", as mentioned above, is characterized by high performance. The company achieved this by installing a powerful heating element inside . With it, you can get two liters of hot water in one minute. Do not worry about the safety of operation, as the device has a pressure sensor, which is very popular with consumers. In addition, the water heater is equipped with a special thermostat, which protects the equipment from overheating. The model is different in that it has a shower and a faucet. It can be connected to a stationary mixer in a short time and quite simply, this will be an excellent solution for a time off the water.
Reviews of water heaters Smartfix 2.0 (5.5 kW)
If you decide to purchase a flow-through water heater "Electrolux", reviews of which will help you make the right choice, then you can prefer the aforementioned model. It has a higher power. Its cost is 3000 rubles, according to users, the price is acceptable. The productivity of the equipment of this model is greater and amounts to 3 liters of hot water per minute. On sale you can find this option of a water heater presented in three options of a complete set.
If the device is marked with the letter T, this indicates that the equipment in front of you is with a crane. The letter S indicates the presence of a shower in the kit, while the abbreviation TS means that the tap will be used in tandem with a shower. During operation, the water is heated to a temperature of 43 degrees, which is the maximum possible indicator. Users who do not purchase the first model of a water heater note that this design is very compact, as it has the following dimensions: 14 x 27 x 10 centimeters.
Operating Instructions: General
Flowing water heaters "Electrolux" will last a long time, if operated under the appropriate conditions described in the manufacturer's instructions. For example, the installation of equipment is prohibited in rooms where the temperature drops below zero degrees. Using the device is not accompanied by difficulties. By opening the hot and cold water faucet, you ensure that the water heater is ready for use. After the cold water tap is turned on, heating can be started by pressing the key located on the front panel. If you want to increase the temperature of the hot water coming from the tap, you need to reduce its consumption.
Installation Instructions
If you like flowing water heaters "Electrolux" and you have purchased one of the models, it is important to ensure that all the rules for connecting to the water supply are observed. In the network, the water pressure can vary from 0.03 to 0.6 MPa. The device should be supplied with water from a reservoir, the water level in which must be 4 meters or higher relative to the level of the device. If you plan to use water for heating from a well, well or water tower, then you should additionally use a coarse filter.
Instructions for connecting electricity
Choosing a flowing electric water heater "Electrolux", you will need to connect electricity. In this case, it is necessary to use a three-core cable, the minimum wire cross section of which is 3 x 2.5 mm 2 , it must be made of copper. It is imperative to make electrical grounding. In order to eliminate the occurrence of air jams and prevent equipment failure, the installation is best done strictly horizontally.
User's manual
If you purchased a flowing electric water heater "Electrolux", then you need to make sure that absolutely all operating rules are observed. The user must remember that it is forbidden to install a mixer, which can block the water at the outlet of the device. During installation, only complete devices intended for the distribution of hot water should be used. After the faucet is open and the heating is activated, you should wait about 15 seconds until the temperature of the heated coolant is stabilized.
Near the switches of the heating stage there is an indicator that will indicate when the heating element is in working condition. If you need to turn off the device, you need to use the button, which is located on the front panel. The water tap must then be closed.
Security measures
Flowing water heater "Electrolux", the operating instructions of which are presented in the article, should be used exclusively for domestic purposes. This indicates that the equipment is not intended for industrial use. Do not turn on the water heater if the electric cable is damaged. This also applies to other damage. It is important to ensure that the electric cable does not cross sharp edges and does not come into contact with hot surfaces.