An excellent alternative to a traditional bathroom has become and is very popular shower. The bulky cast-iron vessel, which occupies almost the entire bathroom, can be replaced by a stylish and uncomplicated design, which consists of a pallet and glass (or plastic) walls.
How to assemble such an object, where to start? The answer to these, as well as to a number of other questions, is contained in this article. Also, the reader will be able to read reviews of people about a particular type of cabin, its advantages and disadvantages.
Types of showers
Before describing the assembly process itself, it is necessary to give an idea of the types of showers existing on the market. After all, it is possible that the installation process will have its own characteristics, depending on the type of construction. The most common type among booths is the so-called shower corner. The market also offers to purchase complex complexes. This solution is already difficult to call a shower booth. Rather, it will already be a mobile zone of SPA-procedures.
An alternative to these two solutions can be a combination shower.
Shower corner
Regular shower enclosures are leading in sales . As the name suggests, the base (or pallet) of such booths is physically placed in the corners of the bathrooms. Thanks to this, the design is simplified and cheaper: instead of installing four walls, you need to assemble only two, or even one, in some cases. This cabin is a pallet and roller blinds. The base (pallet), as a rule, has dimensions of 90 to 90. It is not difficult to assemble a shower cabin, as well as connect to a water supply. This does not require any special skills.
This type of cabs looks most advantageous against the background of other designs because of its relatively low cost and compactness.
Complex solutions with electronic control unit
More technically “advanced” cabin models also have a roof, which necessitates the presence of walls around the entire perimeter of the base. The question of how to properly assemble a shower, in this case is not worth it. The fact is that with the purchase of such a cabin, the outlet delivery service will bring such a cabin to the house almost completely, in assembled form. All that remains is to put it in place and install the doors. By connecting the booth to the water supply and sewerage, you can start using it. The cost of such pleasure varies in a wide range and depends on the technical equipment of the cabin: Sharko shower, Turkish bath, all kinds of spa treatments and so on.
Management is carried out by electronics. Judging by the reviews of residents of high-rise buildings in old residential areas, this technique is rather capricious and sensitive to the value of the water pressure in the water supply and its purity, which makes this expensive toy practically useless in the face of severe tests with our tap water.
Combined type of shower
Such booths are a good compromise for people who like to lie in the bathroom, and at the same time practical and therefore appreciate an ordinary shower. Depending on individual preferences and tastes, you can choose a booth of this type with a base of very different shapes, whether it is an oval, circle or rectangle 120 to 80. The staff of the company that sells this equipment can assemble a shower cabin, as well as connect it.
Cabins also have rich technical equipment and are crammed with all kinds of electronics. Accordingly, the prices of such solutions are also very high, and not every household is capable of acquiring such a booth.
The most famous brand producing such cabs is Niagara. How to assemble a shower cabin, and put it into operation, will help qualified seller staff or builders. It’s better not to touch it yourself due to its extreme complexity.
Shower tray: description and general characteristics
A corner cabin is the most acceptable and practical option: it takes up little space, is inexpensive, stylish and practical.
The tray is the main element of such a shower. How to assemble a base? The question is probably asked not quite in the correct form. The fact is that the pallet is made whole (it can be metal, cast iron, plastic, acrylic, pressed stone chips or earthenware) and does not need assembly. But with the installation and connection to the water supply system, certain difficulties may arise if there is no experience in such work.
Shower trays can be divided into low (with a small height of the sides) and high (somewhat reminiscent of a bathtub bowl). Judging by numerous reviews, low walls are much more comfortable in operation: it is easier to step over the threshold and get into the shower area. This is especially critical for older people and people with disabilities. This design needs a good and effective organization of water discharge, with which many old houses have certain problems due to the old sewer system.
Shower tray: how to assemble and install
The pallet stands on the legs that need to be screwed. To do this, you need to turn it over and screw special studs into the threaded holes. In the event that the pallet is made of fiberglass cloth, it is better not to allow the skin to come into contact with the bottom of the pallet: this can cause irritation. Washers are put on the studs, and then the legs are wound. After all the legs are mounted on the threaded rods, the pan is flipped back.
Further, with the help of a building level, the pan bowl is leveled horizontally by screwing or unscrewing the legs.
How to assemble a shower cabin: detailed instructions
To avoid annoying situations and unnecessary financial expenses, upon delivery of the cabin to your home, you must immediately unpack it and carefully check all structural elements for damage. In this case, you should carefully study the complete set of the shower cabin in accordance with the documentation and compare it with what was brought. If something is missing, then using a shower, as well as assembling it, will be very problematic.
To make sure that the glass is safe and sound, just shake the cardboard packaging with glass in different directions. A characteristic ring indicates that all the windows are intact.
There are no screws in the kit. Therefore, they will need to be purchased. But here are all the other fasteners and accessories must certainly be brought.
Wall mounting
After assembly and installation of the base, it is necessary to assemble the walls of the shower. As with the assembly of the pallet, you should not step back from the manufacturer's instructions.
As a rule, cab glass does not have any markings, and therefore it is very difficult to accurately determine where the top and bottom of the glass are. If in doubt, experienced craftsmen advise comparing the number of mounting holes at the ends. The highest honor is experienced by the upper honor of glass, because it must withstand the weight of the entire sheet. Therefore, the number of holes for fasteners from above is always greater. This fact will always help to accurately set the walls.
For the same reasons, you can sort the door guides: the most massive of them are designed to be installed on top, and the most compact - below.
First, the glass is inserted into the grooves, after which it is slightly lifted, and sealant is applied to the slot. Compliance with this step is mandatory, otherwise the build quality of the entire structure may be affected. And only after applying the sealant can it be cruel to fix the walls. To do this, tighten the corresponding fixing screws.
All sorts of videos will provide invaluable help to beginners. Everyone can assemble a shower cabin with their own hands if they watch the corresponding videos.
To complete the assembly, you must perform the following steps: fasten the posts to the arch using self-tapping screws; to attach strips of a rubber sealant to a wall in the provided places; the joint of the guides and the pallet itself is treated with a sealant to prevent water from flowing out.
Complete build process
At the final stage, all decorative elements are attached: door handles, mirrors, shelves for soap accessories. The shower rain itself is also installed.
After that, it remains only to connect the booth to the pipes of hot and cold water and to the drainage system.
After checking the operation of the hydrobox for water leakage and the presence of an extraneous noise effect during operation, you can safely start using a shower. It is possible that during operation the horizontality of the pallet will be violated. In this case, it is necessary to re-set it exactly using the building level.
To assemble a shower cabin yourself, you must carefully study the instructions from the manufacturer. In the course of work, you must be extremely careful and attentive so as not to damage the structure and not cause damage. Therefore, it is recommended that you contact a professional. He will quickly and efficiently be able to assemble a shower cabin. How much does a similar job cost? It is difficult to answer this question. There is no universal price, since it consists of many factors: the region in which the given service is provided, the nature and complexity of the work, the presence (absence) of consumables and others.