Many people consider an electromechanical lock a useful and convenient device. When using such an invention, it is no longer necessary to run to the gate and check who is walking. Unauthorized entry into the entrances and under the hood of the machine can also be prevented using a simple electromechanical lock.
How to choose a device type?
There are two types of models: internal and external. If you want to install an electromechanical lock on a gate, then it is appropriate to use an external type model. The differences between the devices depend on the type and material of the door or other surface on which the device will be mounted, the acceptable level of voltage supply.
The cost of such a product is higher than, for example, an electromagnetic lock, but at the same time it is more practical, durable and more reliable.
Classic equipment consists of a number of elements, among which:
• Power Supply;
• intercom;
• call bar;
• Castle;
• keys;
• external patch panel;
• wiring;
• box for the device.
Having a lock with a full range of components, it will not be difficult to install it, and the process itself will not take much time. Even a novice will cope with the installation of an electromechanical lock in 30-60 minutes.
When working with such a technique, strictly follow the instructions to avoid mistakes. The lock can be opened with a key or by pressing the intercom button.
Tools and supplies for installation
To carry out the installation of an electromechanical lock, you will need:
• combination cable;
• metal wire (3-5 mm) of high strength;
• set of power tools: drill, grinder, set of drills;
• electrical tape;
• mounting clamps;
• locksmith tools: screwdrivers, wrenches, pliers.
Installation of the electric lock on the gate
Getting started, do not forget to read the installation instructions for the product. It describes in stages the wiring diagram and installation features of the product.
Why read the instructions? Erroneous actions can lead to breakage of the lock during installation, as a result of further operation of the product will be impossible.
Walkthrough for installing the electric lock
Of all types of anti-vandal devices, according to customers, the best device is an electromechanical lock. Installation instructions consist of a number of recommendations:
- The installation process of the external system begins with the marking of the holes. The product is applied to the intended mounting location on the gate and, using a marker, mark the places where the mounting holes will be drilled.
- Drill drill holes.
- The lock is mounted on the gate and attached.
When installing an electromechanical lock of an internal type, installation occurs in the following sequence:
- A grinder cuts out a small depression in the end of the door / gate, corresponding in size to the electric lock.
- Mark the hole for the bolt to enter. You can use a metal reciprocal level - so markup will be easier.
- The bar must be attached to the mounting location. Align it so that it is directly opposite the castle, then mark the place under the crossbar.
- Having dealt with the previous step, it is necessary to mark the attachment points for the strike plate.
- Drill holes.
- Cut a place under the crossbar.
- Attach the bar to the desired location using screws.
How to lay a cable from the lock to the intercom
If a combination cable is not included, purchase one at a store. It is necessary to power the electric lock and transmit the signal and video to the screen of the intercom.
To find out what brand of cable is needed for the lock, you need to study its passport book, but the meter will have to be determined independently.
Experts recommend laying the cable in the shortest way from the gate or entrance door to the nearest wall of the house. Sometimes they stretch it through the air, fence or let it underground. For a cable stretched in the air, you will have to build an additional support. Pull the steel wire or cable to prevent a loose connection. Launching the cable under the ground, it is placed in a metal or plastic pipe of small diameter.
The call panel is mounted on the outside of the site. The height at which the mechanism is mounted is indicated in the product passport. On this, the self-made installation of the electromechanical lock is considered complete.
Features of installing an electromechanical lock for the hood of a car
The electric lock belongs to the category of protective devices. It is based on an electric drive that blocks the hood of the car. When a signal arrives, an electromagnet is triggered, which brings the crossbar to a stationary state.
To open the hood, the driver just needs to press a button. After this, the rod is attracted by an electromagnet. This design is only suitable if there is a direct current to power the magnetic mechanism.
Benefits of a car hood lock
The electromechanical auto-lock has several advantages compared to peers, which makes it preferable in the choice of anti-vandal devices. The advantages of this mechanism include:
- simplicity in operation. One click of a button is enough to unlock the bonnet;
- machine security from intruders;
- installation of the electric lock is simple.
Along with the advantages, inherent in such systems and some disadvantages. If the battery is completely discharged, you will have to use the emergency cable to gain access to the engine department of the car. Owners respond that this method does not always work and sometimes you have to tinker to unlock the car. Sometimes it causes a lot of trouble.
Do-it-yourself installation of an electromagnetic lock on the hood of a car is within the power of any car owner. Despite the fact that you have to face an electrically conductive device, its installation is simple compared to a mechanical lock for a machine.
To complete the tuning of the car, the owner, in addition to the external lock, will have to mount a hidden button inside the car.
Important! External and internal structural elements, as well as all necessary parts, come in one set and are sold as a set.
The installation of the electromechanical hood lock is completed at the stage of laying the wires and connecting the buttons with the product, according to the instructions.
Mortise lock for entrance door
The most reliable is the door with a semi-mechanical lock. Installation of an electromechanical lock on a door takes place in the following sequence:
- Attach the lock to the door leaf and make it a paper template.
- Mark the housing recess and the locations for the mounting holes.
- Cut out the designated niche and bolt holes.
- Insert the locking mechanism into the hole and groove and securely fasten.
- Mount the code panel and connect it to the mechanism itself.
- On the door jamb, drill holes for the crossbars and set the bar.
- Check the lock for functionality.
In the accompanying documentation for locking (code) locks, there is always an insert with instructional recommendations. If you follow them, installing an electromechanical lock in the entrance does not seem complicated.
Important! If you are not a fitter and you do not have the skills to work with such a tool, it is better to consult a specialist.
Advantages and features of locking devices
Buyers note a number of advantages of electromagnetic locks, highlighting the main:
- unlike level and cylinder locks, the electromechanical lock is reliable;
- such a product is subject to continuous operation for more than one decade;
- in case of breakage, the lock is easy to restore, repair work is carried out quickly and, as a rule, does not cause problems;
- this design is suitable for mounting on a gate, car hood, a door in the entrance, house, office, garage, basement, which indicates multivariate use;
- you can control such a security system remotely, which, you see, is very convenient;
- the lock is easily locked from the inside, and it can only be opened by means of an incoming signal;
- such products are notable for their low price policy, therefore they are available for every average consumer.
If you buy a lock in a specialty store, complete with the product you can order a package of additional services for installation and maintenance of the product. Electromagnetic locks from market leading lock manufacturing companies are of good quality and reliability.
We hope this article will help you decide on the choice of an anti-vandal system, a lock for the entrance door, and an electromagnetic device for the gate. And having purchased such a product, you will appreciate all the advantages of using the device on your own experience and without any problems will be able to complete the installation of an electromechanical lock.