Maintaining heat inside the garage in winter becomes especially relevant if you need to tinker with the car, so the heating system must be efficient and reliable. Heat guns in diesel fuel do well with this job. They are sold in stores where you can buy tools, car parts, and much more like that. Heat guns in diesel fuel are characterized by good performance, save the owner’s money, and with proper handling do not pose any health hazard.
general characteristics
To understand the advantages of such equipment, you need to know what it is. The diesel heat gun works according to a simple principle, similar to that used in domestic fan heaters - air is heated with its subsequent injection into the stream. When it is in a cold environment, hot streams give their energy to the masses of cold air. This cycle continues until the entire internal space is completely heated to the optimum temperature.
Device
Heat guns in diesel fuel are equipped with a reliable metal case designed to protect the heating element and the supercharger from damage or penetration of objects that could catch fire and cause a fire.
A safety element must be included in the design, turning off the system in case of overheating. Therefore, heat guns in diesel fuel can be safely turned on to warm up the room in which you are doing something, and do not worry much. However, compliance with safety precautions has not been canceled.
Principle of operation
Heat guns in diesel fuel, prices for which start from 3,500 rubles, consist of several basic elements: a fan that drives air through the heater, a heating element, as well as a housing in which everything is placed. This description is quite general, but there is no need to understand the intricacies of the device of such equipment for those who use it. If the human profession is the repair of heat guns, then this is another matter.
So, everything is clear with the device, and with the principle of operation, everything is not much more complicated here. Due to the combustion of fuel, air is enriched with heat. He drives the fan through the heating zone. And how exactly the air heats up, and allows you to divide the gun into two categories.
Types of Heat Guns
Speaking of safety, many can think about where the products of combustion go , because diesel fuel burns and forms certain substances that need to be removed. All these compounds are quite dangerous for human health, so it is important to take care of their abduction. And then it's time to talk about the fact that heat guns in diesel fuel are of two types: direct and indirect heating. Each of these species has its own characteristics, features and possibilities for use.
Diesel indirect heat gun is well suited for a garage. This design assumes the availability of a nozzle - it is designed to discharge exhaust gases. A hose is attached to it, which can subsequently be brought out onto the street. This will not lead to any significant heat loss, but harmful carbon monoxide and other substances that pose a health hazard will not accumulate in the room. That is why many people perceive a diesel heat gun as the best option in comparison with gas models. Many gas-fired appliances do not have such a method of removing combustion products, so you will need to open the garage for ventilation, which will cause significant loss of precious heat.
Direct heat gun
This option is not suitable for rooms in which people are located, since the products of combustion of diesel fuel are mixed with hot air and accumulate in the room. Therefore, the choice should be based on the most thorough study of information about the device. If you need a heat gun, the instructions for which indicate the impossibility of its use in the room where people are located, then you should think before buying it.
Scope of application
Heat guns in diesel fuel can be found in many places. They are usually used for heating, during the installation of suspended ceilings to speed up the process of heating the film, as well as wherever there is a need for mobile devices that can quickly and not too expensive heat rooms of various sizes.
The most widely used heat guns, reviews of which are mostly positive from users, were used as appliances for heating storage rooms, building halls, and other places where heating is required, but the use of traditional equipment is difficult or impossible for any reason . In particular, such devices become relevant for buildings in which there is no direct connection to electrical networks. The operation of the heat gun also requires a certain consumption of electric energy, but it does not need so much, so a small portable generator is quite capable of coping with this task.
Special Views
Heat guns in diesel fuel using infrared radiation deserve special attention. This type of equipment heats the room without the use of a fan, while the air temperature does not rise due to its direct heating. Like all infrared heaters, such a gun heats planes and objects, rather than air masses indoors. The heating element here, as in all other cases, works due to burning fuel, however, without involving a fan. This makes such a device completely silent during operation, which adds certain advantages to it.
Terms of Use
Basic requirements for the use of equipment vary depending on what type of equipment is used. If we are talking about a gun with direct heating, then high-quality ventilation of the heated area is required. Most often, thermal units are used for local heating of rooms with good ventilation or half-closed type. For heaters that use indirect type heat transfer, there are no such stringent requirements, since a chimney can be used to remove combustion products.
Heat guns in diesel fuel are increasingly used in the installation of stretch coatings in rooms. The operation of such units requires minimal fuel consumption, which significantly reduces costs. In this case, the requirements for organizing the operation of the device involve the organization of exhaust gas, which, as mentioned above, is very simple.
Benefits
The price of a heat gun can be from 3500 rubles (depending on capacity and manufacturer), and its upper limit is not limited. Such heaters are able to work not only on diesel fuel, but also on kerosene or waste oil. Thanks to small additions to the design, such fuel can also be used, as a result of which the efficiency of the equipment increases several times.
The main trump card of such devices is their mobility. They weigh very little, and their bulk is a fuel tank, the dimensions of which depend on the power of the device. Thanks to this, it is possible to transport equipment and install it in different places without special difficulties.
A fairly large lineup allows you to choose the right option for solving any problems. The maximum efficiency of the heat gun is ensured even with its smallest size, while the maintenance costs are also hardly significant.
This becomes quite relevant in those moments when you need to quickly and very strongly warm up the room in which repairs are carried out. In particular, when installing suspended ceilings. Using a gun, the air warms up to the desired temperature. Thanks to the highest mobility of such a heater, it can be brought into the room without any difficulties, and then removed from there. For this, there is no need to attract additional staff, everything is done by the masters who directly install the coating.
Repair of heat guns is also not particularly difficult. For these tasks, a minimum set of tools and basic knowledge in the field of heating equipment operating on liquid fuel are required.
Advantages
Safety is a significant factor when choosing a device for heating. According to this parameter, gas guns are far behind diesel ones, and for electric operation access to the power supply network is required. Therefore, it is the diesel version that can be considered optimal.
Reliability is an important parameter, and it is he who prompts that it is better to make a choice in favor of such equipment. The diesel heat gun of indirect heating is practically not susceptible to breakdowns, and its repair is much simpler than in the case of using gas units.
All these factors speak in favor of the fact that it is a reliable, economical and convenient equipment. The only thing that can overshadow the use of such heaters is the requirement for a gas pipe or ventilation.
Conclusion
It is already clear what qualities heat guns have. Reviews of such equipment indicate the maximum convenience and ease of use. Everyone who had to use it, testifies that this is a modern way to quickly and efficiently warm any room. Such devices are in great demand among repairmen, as a number of operations are performed with their help. The price of a heat gun is quite affordable, so such a device pays off very quickly.