The jigsaw machine allows you to quickly and efficiently cut wood. The standard model consists of a work surface, racks, motor and spindle unit. Some devices are made on stands. The latches are often installed in the side of the work surface. It is also worth noting that the models differ in power. The manufacture of a jigsaw machine can only be carried out subject to the instructions.
Desktop devices: expert reviews
If you believe the reviews, then make a desktop modification is very simple. First of all, a stand is prepared for the work surface. Its width should not exceed 30 cm. It is more expedient to select a motor of a single-phase type with a maximum voltage of 220 V. A home-made jigsaw machine (bench-top) produces an average operating frequency of 55 Hz.
Reviews of experts say that yews are better to use from steel, if desired, they can be cut independently. The file is mounted on the spindle assembly, which is attached to the rack. Many models use a lock, which plays the role of an emphasis. A small screw is used to secure the file.
Leg models
If necessary, you can make this jigsaw machine with your own hands. Drawings of modifications include frames of different sizes, and spindle assemblies are usually used with guides. Many models are made on a wide bed. The legs can be installed from the tubes. There are also machines with plates. After cutting the working platform, you should take up the spindle assembly.
If we consider devices with control units, then for the model you will need a controller. It is more expedient to use the motor of collector type on 220 V. Yews on jigsaw machines are installed rotary type. The direction must be welded to the edge of the plate. The file in this case must be securely fixed. The optimum height of the spindle unit is 2.2 cm. At the end of the work, it is important to install the power cable and connect the equipment.
Wide Frame Reviews
Professionals are able to assemble a jigsaw machine with their own hands. Drawings of devices indicate the presence of wide stops. However, first of all, it is necessary to establish a bed. If we consider a simple machine, then the latch for the modification can be selected a small length. Reviews of experts indicate that two racks are enough for the model. A welding inverter is used to assemble the machine. Directly spindle unit is installed in the central part of the working platform. The hole for the file can be made a milling cutter. It is also worth noting that experts do not recommend the use of two-phase motors.
Compact modifications
Following the instructions, you can assemble a compact jigsaw machine with your own hands. Drawings for devices include double racks and narrow frames. Beds are used with a low profile. Many models have a spindle assembly without a holder. In this case, the guides are installed of short length. For self-assembly of the model, it is recommended first of all to choose a high-quality frame.
Additionally, the latch is soldered under the working plate. You can use a lining to reduce vibration. To fix it, ordinary glue is used. A file for modification should be selected with a small thickness. The optimal installation distance of the central node is 14 cm. Moreover, the width of the platform is on average 17 cm.
2 kW jigsaws
If you wish, you can make this jigsaw machine with your own hands. Drawings for assembling modifications are very easy to find. As a rule, frames are used with a width of 35 cm. The thickness of the plate should be about 1.5 mm. The hole for the file must be made before installing the central unit. If we consider models without stops, then the frame is used with a low profile. It is also worth noting that the spindle assembly is more appropriate to install on a lining.
A cover is used to reduce noise. Many models use several stops. In this case, the unit is installed at a height of 10 cm. It is better to fix the file on the plate. The clamp can be used screw type. After fixing the central node, the motor is placed. To modify this type, a device with a single-phase unit is suitable.
3 kW models
With a 3 kW desktop do-it-yourself jigsaw, it's pretty easy to do. Specialists recommend using racks with wide stops. The latches must only be installed after the central unit. The file for modification can be selected at 1.2 mm. Some experts make a hole after installing the frame. In this case, the supports are soldered to the sides of the table.
Further, it is important to estimate the size of the spindle. It is more expedient to use the motor with a protection system and a casing. It is also worth noting that collector devices that operate at a frequency of 45 Hz are very popular. They have low power consumption and do not overheat. Holders are used to fix workpieces. The optimal spindle height is 15 cm. It is also worth noting that there are models with adjusting plates. A flywheel is used to control the rack. To install the control unit there is a conventional controller.
How to make a 5 kW device
Having prepared several stops and the spindle unit, you can make a jigsaw machine with your own hands. Expert reviews indicate that 5 kW models are well suited for longitudinal cutting. Before starting work, all the necessary tools are prepared. You will need a saw, a grinder, as well as a welding machine and a mill. It is more expedient to assemble a frame for a jigsaw machine from steel plates with a thickness of 1.3 mm or more. For the motor you need to immediately provide a place. Beds in devices are installed high profile.
At this stage, you can immediately cut a hole for the file. The plug assembly must be mounted on the top of the plate. Additionally, it is worth noting that a large holder is required for the file. If we consider a simple model, then the racks can be installed on the sides of the frame. Yews are used rotary type. At the top of the frame must be a rack. A small casing is selected under the motor. On average, the width of the frame should be 35 cm. If we consider professional models, then they use adjustable clamps.
Two-pin modification
How to make a jigsaw machine with your own hands? The model with two pins is assembled only on a wide frame. First of all, plates under the bed are cut. If we consider the desktop modification, then the control unit is more appropriate to install in the upper part of the device. The optimal width of the frame is 45 cm. In this case, the spindle unit is installed behind the stops.
For racks, a swivel bracket must be provided . Many models use transmission units. At the same time, motors are only suitable for the collector type with a frequency of 30 Hz. The file is installed as standard in the holder. The optimal height of the spindle unit for models is 35 cm. Pins for adjusting the bed are used with handwheels.
Three Pinoli Models
On the basis of a single-phase motor, it is easy to make this desktop jigsaw with your own hands. Tools should be prepared in advance. Many models are equipped with four stops. They have a large length and high profile. It is also worth noting that the spindle units are selected with a belt drive. At the beginning of work, it is very important to calculate the length of the frame. If we consider ordinary spindle units, then the rack for them is prepared for a small length.
The central support must withstand heavy loads. A welding inverter is used to install the plates. A motor is required for the motor, which will significantly reduce the noise level of the device. The saw for modifications of this type is suitable for 1.2 mm. At a power of 3 kW, a device for three pins will produce a frequency of 55 Hz. Brackets are needed to fix the flywheels.