An electric wall heater in the form of a picture can become not only a compact solution for creating a comfortable indoor microclimate, but also an interior decoration.
Why choose a wall heater
The main advantages of this solution are operational safety and simplicity. For such structures, there is no need to look for fuel, it will be enough to turn on the device in the mains, and the air temperature in the house will rise in a short time.
The main varieties of electric wall heaters
Electric wall heater in the form of a picture can have different design features. Modern technology has made it possible to make such devices light and compact. Placement on the wall is a practical solution to the issue of saving space, as well as a safe approach, while eliminating the likelihood of the device falling down, as well as accidental contact with it. The wall electric heater in the form of a picture can be infrared, oil, ceramic or convection. Each of these models works from a conventional outlet, and can also be left unattended for a while. On the basis of such heaters, it is possible to organize autonomous full-fledged heating, which does not imply human control.
Oil coolers
If you decide to choose a wall-mounted electric heater in the form of a picture, then you can prefer its oil type, which is a sealed enclosure. Inside it is mineral oil and a tubular electric heater. The principle of operation of such equipment is quite simple. It consists in the fact that oil, which is in a boiling state, heats the metal, and the radiation from it heats the wall and the surrounding air. As a result, heat spreads throughout the room.
Such devices are characterized by a long service life, low cost and silent operation. The body of the device does not heat up, so it dries the air no more than a regular water radiator. Among the shortcomings, one can single out a very impressive weight, slow heating of the room, as well as problems that may arise if it is necessary to mount on the wall. If the partition is not too strong, then fixing may not be possible. Wall-mounted oil heaters are not recommended to be installed in bathrooms, and also left inside cottages without operation.
Convection models
Considering wall-mounted electric heaters economical, it is worth paying attention to convectors that are able to ensure uniform heating of the room. The operation of such equipment is based on heating cold air, which goes down according to the laws of physics. Such devices provide uniform heating of the space, do not burn oxygen according to the type of devices called heat fans.
Features of convection devices
The electric convector includes a heating element and a housing. The latter includes openings for the movement of air masses. Cooled air enters the lower grilles, heats up and exits through the upper blinds, which are located on the front side. The heating element may be tubular, monolithic or needle-shaped. Many manufacturers today began to abandon the latest variety of heating elements for the reason that the heating elements are more durable, heat less and allow the equipment to be used in rooms that are characterized by an increased level of humidity. Monolithic heaters act as part of the casing, they are the most efficient, silent and durable. Considering the principle of operation of convectors, it can be noted that they are active and passive. The former have a forced fan, which increases efficiency. Almost all convectors are produced using technology that involves the presence of a waterproof housing. This allows you to operate such appliances in bathrooms as well as showers. The case heats up to 60 degrees, which completely eliminates burns.
Possibilities of convection heaters of electric type
If you are considering wall-mounted electric heaters economical, then perhaps your choice will fall precisely on convectors. However, when purchasing such equipment for an apartment or a summer residence, it must be taken into account that the effectiveness of the device will depend on the power of the product, and not on the dimensions of the case. If the ceiling height in the room is standard, then 1 kilowatt of convector power will be needed per 10 square meters of area. In addition, it is important to pay attention to other factors.
Among them, one can distinguish a thermostat, which is a device for adjusting the heating temperature. The latest generation of heaters are equipped with electronic thermostats, which allow the most accurate adjustment of the device. A timer is also a very useful addition, with the help of which it is quite simple to adjust the operating time of the equipment. For many consumers, anti-freezing is also an important feature, which works in automatic mode, including turning on the device when a critical temperature is reached. This option is very useful for operating the device in homes or cottages, where the owners live only periodically.
It is impossible not to highlight the restart function, which provides for the automatic switching on of the device with predefined settings. This functionality is triggered by a power outage. Such an addition as a remote control, which allows you to change settings for a short time without leaving your place, cannot be called unnecessary.
If you are concerned about the moment that after prolonged use of the device air may lose the necessary humidity, then it is worth choosing devices that are equipped with a humidifier. If you care about the health of your loved ones, it is recommended to prefer models of convectors that are equipped with ionizers, this module under the action of high voltage gives oxygen molecules a negative charge.
Features of ceramic heaters
If you choose a wall-mounted electric heater for a summer residence, then you can pay attention to the ceramic variety. In appearance, such equipment may resemble the indoor unit of a split system, however, the case in this case will be slightly thinner. The fan heater works on the principle of forced convection. The air from the room constantly flows to the heating element, which has the form of a plate consisting of ceramic elements. Passing through small holes, the air heats up without being overdried.
If you decide to purchase a wall-mounted electric heater for a summer residence, and it does not matter for you whether the equipment will make noise, then this solution is most suitable. Wall mounted models have a power controller, thermostat, remote control, and display. The latter allows for automatic operation. However, the listed functions can be supplemented with some improvements. An additional advantage of such a heater is the fact that it can be used as an air conditioner in the hot season, including equipment without heating.
Infrared Electric Heaters
If you choose wall-mounted electric heaters economical, the picture will be the best solution that will harmoniously complement the interior. In addition to the above varieties, it is possible to distinguish infrared devices that operate on the principle of solar radiation. Such heat sources differ from other heating devices in that they heat the surrounding objects, and not air. In order to organize an autonomous heating system, such heaters can be located around the entire perimeter of the room, whereas if there is a need to use the device as an additional heat source, the unit must be installed in the place where you spend the most time during the day.
Features of Infrared Panels
If you choose wall-mounted electric heaters economical, the picture will be a wonderful decoration for any room. Infrared panels are economical and compact; they benefit when compared with a fan heater and convectors. The operation of such a panel will be inconspicuous, since the equipment does not create noise and air movement, which is not always pleasant. Comfortable temperature will be provided by an automatic temperature controller.
Such a wall electric heater, reviews of which are only positive, is made using glass ceramics and metal, which form the basis of the body. Such equipment looks modern and stylish, which saves the owners from the hassle that is associated with the fact that the equipment must be hidden for the summer. Electric infrared wall heaters suggest the presence of a heating element that is located inside the housing and has no limitations on the life of the heater.
Features of film heaters
Such devices are completely fireproof, they are not able to cause burns, and the surface does not heat up more than 60 degrees. Such decorative heating can be successfully used in hallways, on balconies, in bedrooms, as well as in bathrooms. The electric film infrared wall heater, reviews of which are combined with positive characteristics, is the thinnest on the modern heater market. In the manufacturing process, a carbon fiber is used, the thickness of which is 1.5 millimeters. This heat source is flexible, so if necessary, it can simply be rolled into a tube for transportation or storage. Low weight allows you to attach such devices to any surfaces, which can include even doors and thin walls.
Conclusion
The described electric wall heaters can be hung even by an inexperienced master, this will not cause any difficulties for a housewife. The operation of such equipment is no more complicated than a conventional household appliance.