The modern construction market offers a wide variety of materials that can be used for the construction of buildings for various purposes. It remains only to determine what you may need in order to create a frame garage with your own hands. This method of construction can be considered the most inexpensive, fast and convenient at the current time.
If you have enough time and desire to try your hand at frame construction, you need to stock up on building materials, after which you can start building a frame garage with your own hands. First you will need to dig a trench in which to dump construction waste or gravel. Then build a shallow foundation, building a
reinforcing cage in two rows and pouring it with concrete. Allow the base to stand for 15-20 days. The next step will require 12 bars with a cross section of 100 millimeters, designed for corner posts and gates. The upper and lower strapping can be done using bars of 50 * 100 millimeters. They will need about a dozen. All materials must be treated with an antiseptic containing fire fighting additives. The frame construction of the garage involves lateral stabilization of vertical wall and corner racks under the slope. For this, it is appropriate to use bars with a cross section of 50 millimeters. Rafters are made from elements of 100 * 50 millimeters, there should be 2-3 of them, and for the roof lathing, lumber with a cross section of 50 * 50 millimeters, which is laid in 1-1.2 meters, is used. After the roof lathing is finished, you can proceed with the installation of walls from OSB plates, lining or boards. Inside, the
frame garage with your own hands should be laid with a heater, which is most appropriate to use mineral wool (it has good performance and does not burn).
The next important step is the wiring device, without which it is now difficult to imagine any room. In wooden structures, its installation is carried out in special corrugated metal hoses. Outlets must have moisture protection valves, and
lamp shades must be sealed tightly. A self-built frame frame
garage offers a pleasant appearance. That is why the inside walls should be sheathed with any material that is convenient for the owner and at the same time fully complies with fire safety requirements.
The material for the roof is selected depending on moisture resistance, strength and cost. Gates should be selected from those that have already proven themselves: swing or sectional. Some prefer lifting structures, but it is important to consider that they must be such that they can be used for other purposes if you decide to disassemble the garage.
Now you have an idea of how to build a frame garage with your own hands. As you can see, there is nothing complicated. In the same way, you can make a frame house with a garage, but it is important to consider all the parameters and sizes of the elements.