A rather important factor when choosing a welding inverter is its scope. You must decide for yourself for what purpose you are purchasing the device. If this is a one-time welding in the country, then you can prefer a household model. Whereas for daily work, a professional or industrial class device is suitable. Household inverters are used for welding small volumes. After 10 minutes of operation, the device requires a break.
As for professional-class units, they are used for welding pipes in the manufacture of frames, as well as repair of communications. Industrial inverters are used at relevant facilities, and their operation mode is continuous throughout the day. If you want to choose the described equipment for yourself, then you should consider several models, among others, Svarog welding inverters are on the market today, which will be discussed below.
Overview of inverter models from a welding manufacturer: REAL ARC 200
This model of equipment will cost 5900 rubles. It is an inverter that works with MMA electrodes. The equipment provides a high-quality welding seam due to the built-in anti-stick function. The design provides for a control panel that is clear and simple. There are current regulators on it.
The internal components of this Svarog welding equipment are protected from overheating, which was achieved thanks to the holes on the body. Operation is possible at temperatures from -10 to +40 ° C. The device has a small weight and compact housing, which allows you to store the inverter with convenience.
Specifications for ARC 200
The above device relates to professional equipment. Its maximum power is 5 kW. There is no case in the kit. The unit weighs 4 kg. Its overall dimensions are 310x135x200 mm.
The inverter is IP21S rated. It has a power plug. The operator will not be able to use the TIG welding mode. PV at maximum current reaches 60%. The minimum input voltage is 160 V, the minimum current is equivalent to 15 A.
Model reviews
The above-described welding equipment “Svarog”, according to consumers, has many positive features. Among them are the following:
- convenient transportation;
- visual control;
- fast connection.
As for convenient transportation, it is guaranteed by the handle, which is located on the top of the case. For visual monitoring of work on the front panel there are indicators of overheating and network. Consumers also emphasize the ability to quickly connect. The connectors that are located next to the ventilation holes are responsible for this.
Consumers consider the additional advantages to be a long service life, stable arc burning, as well as the possibility of stable operation in the range from 160 to 270 V. The operator will have the opportunity to change the polarity from direct to reverse and vice versa.
Inverter Overview ARC 205 B
The Svarog ARC 205 brand inverter is equipment whose cost is 16,200 rubles. The unit has a display and operates on a 220 V single-phase network. The device has compact dimensions and low weight, resistance to voltage fluctuations, and a high degree of reliability.
The design provides for a built-in fan, which contributes to cooling and prevents overheating. The unit can be used for welding work in different conditions, namely in:
- small car service;
- a garage;
- private household.
Model Specifications
Welding inverter "Svarog 205" refers to professional equipment. The maximum power is 6.5 kW. Overall dimensions are 410x160x260 mm. The device weighs 8.4 kg. PV at maximum current reaches 80%.
The equipment has a TIG welding function. You should pay attention to the open circuit voltage, which is 63 V. The maximum current is equivalent to 200 A. The design is supplied in a box and does not have a case.
Model reviews
The above-described welding inverter "Svarog", according to consumers, has many advantages over other models, among them:
- convenient transportation;
- the presence of a control panel;
- the ability to quickly connect.
Transportation is provided by a belt. With it, you can hang the device on your shoulder. There is a display on the case where the operating parameters are displayed. This allows visual inspection. With the regulator you can change the strength of the welding current. There are special connectors on the case with which you can connect welding cables and get started immediately.
Reliable connection eliminates current loss, the contact point does not heat up. After reading the reviews about the welding inverter “Svarog ARC 205”, you can understand that with it you can achieve high quality work. The unit provides easy ignition, it has a built-in unit that reduces the open circuit voltage. Managing equipment is very simple. Metal spraying is not so intense. You can not be afraid of overheating, because the equipment is well protected from this.
Inverter Overview ARC 145 Case
If you want to purchase an inexpensive model of the welding machine, then you should pay attention to the device mentioned in the subtitle. You will have to pay 13500 rubles for it. The equipment is powered by a voltage of 220 V. You can conveniently carry the device using a belt on the case.
By touching the electrode to the work surface, you can immediately begin work. This welding inverter "Svarog" was developed and manufactured using a new technology that allows you to connect to household outlets. This model is good in that it is equipped with a case and the necessary tools for the welder to work.
Specifications
The professional inverter of the ARC 145 brand has a maximum power of 5.7 kW. The overall dimensions of the device are 290x120x198 mm. TIG welding in the unit is not. PV at maximum current is 60%.
Model reviews
Having familiarized yourself with the characteristics of the Svarog ARC 145 welding inverter, you should learn about the opinions of consumers. They claim that transporting the unit is very simple. It provides the possibility of continuous operation and has smooth adjustment. As for long one-time operation, it is provided with an effective cooling system. Smooth adjustment is also popular with consumers. The current strength will be able to change thanks to the wing regulator.
Finally
Svarog welding inverters are so popular among consumers for the reason that they are offered for sale in a good combination of value and quality. At an affordable price, you can purchase a professional-class model, which can easily be used for the manufacture of metal structures and for welding communications. The mode of operation without interruptions can be long, and the quality of welding is very high.