Today is a fairly popular brand Fakro. The attic of this manufacturer is on sale at an affordable cost. Such products may have three or four sections, and the products themselves are made of pine. With the help of the design, you can safely and quickly climb to the attic or to the attic room. After the assembly is completed, the staircase is stored in the ceiling space, and you can enter it in any interior.
Unfolding the structure is quite simple, even a child will cope with the process. Therefore, such stairs are so common in private residential buildings. They are distinguished by durability, environmental friendliness, wear resistance and a long service life. And you can save money not only at the time of purchase, but also at the installation stage.
The cover looks aesthetically pleasing and does not require additional decoration. The staircase has compact dimensions and allows you to save space, it is functional, convenient to use, easy to install and quite durable. The cover has a thickness of 36 millimeters, is made in the form of a frame and cladding from fiberboard in white. The remaining space is filled with polystyrene, which acts as a heater. The outer surface of the lid is completely smooth, there are barely noticeable mounting elements. The metal rod and lock allow you to close the lid.
Precise installation is ensured by the corner elements that secure the ladder. The design guarantees stability. In order to increase the strength of the existing joints, the steps are fixed in a dovetail and do not touch the cover. The recesses are anti-slip, increasing safety and comfort.
Varieties of stairs Fakro
Fakro wooden attic stairs are available in several varieties. Each of them has its own characteristics. For example, LWS Smart is made of pine, complemented by a 36 mm thick insulated manhole cover. You can enter the product in any room, and organically the design will look on the ceiling from the lining. The LWK Komfort model is made of high quality pine and is equipped with a 36 mm manhole cover. On a light or white ceiling, such a product will be almost imperceptible. The composition may be three or four sections. The kit includes a side metal handrail, which provides ease of use, as well as safe use. The staircase has rubber tips necessary to prevent damage to the floor surface.
Staircase dimensions
Fakro attic stairs are available and available for sale. It can withstand a maximum load of 160 kilograms. Before purchasing a device, it is necessary to calculate that the length and width of the steps are 34 and 8 centimeters, respectively. Thermal insulation is 3 centimeters thick, and the height of the room can reach 280 centimeters. When folded, the staircase measures 120 x 60 centimeters.
First installation method
Today you can find Fakro products in the stores of related products. The attic staircase just refers to the goods of this manufacturer. If you decide to acquire such a mechanism, then you need to get acquainted with the technology of installation work. This provides for the opening, which should have three dimensions indicated on the package. In order to choose a place for installation work, it is necessary to take into account the length of the stairs when it will be disassembled. Auxiliary boards are installed to the bottom of the opening, they will be supported by the structure during installation.
Having visited the store, you can familiarize yourself with Fakro brand products; the attic staircase is an excellent example of this. It must be installed by two people. Before starting work, it is necessary to prepare a set of necessary tools, namely: screws, a screwdriver, an angle meter, a key of 10. One of the masters must climb into the attic with a stepladder, and after that the ladder goes up and stacks on the installed boards. In those places where it is supposed to screw the screws, it is necessary to install spacers between the edges of the opening and the box so that the right angles on the sides of the box are preserved. After that, the staircase is fixed with two screws, two of which are installed at the rear, while the other two are installed at the front.
For reference
After the installation of the Fakro attic staircase has been completed, you need to get rid of the auxiliary boards and open the structure. The device must not be operated until the installation is completed.
Methodology
Lay out the stairs should be the worker who stayed upstairs. It strengthens the side parts of the box with two screws, and then fills the gap formed between the edges and the box with insulating material. In the side element, it is necessary to loosen the bolts, and then swing the ladder from the cover to the stop, then the fasteners can be finally tightened.
The attic staircase with the Fakro hatch must be adapted to the height of a particular room, for this the bottom element is sawn off so that after unfolding all the elements form a straight line. To do this, the height of the room is measured in the place where the structure was installed, and after that, using the template, the position of the cutting line should be indicated. The lower element is sawn in the indicated line.
Additional recommendations
Fakro attic stairs, the dimensions of which are not very suitable for the height of a certain room, and the cut line falls on a step, must be installed in such a way that it is possible to use the height adjustment on the side corners. To do this, the screws relax, and then the ladder moves so that the cut line is behind the step. The adjustment of the location on the side corners can be used when the lower section of the ladder turned out to be sawn inaccurately. At the same time, the fasteners are loosened, as are the fixing corners, and after the ladder is moved up or down so that the sections form a straight line, while the lower element should be in place.
Installation of the Fakro attic staircase in some cases can be accompanied by adjustment of the angle of the structure by changing the location of the hole in which the side support is fixed.
The second way to install the attic stairs
In a previously prepared opening, it is necessary to lower the ladder with the help of auxiliary bars, which are fixed with a cord. If finishing panels will be used, a centimeter clearance must be ensured between the ceiling surface and the boards. In those places where it is planned to install screws, it is necessary to install spacers between the edges of the opening and the staircase, this will save right angles. Mounting wedges allow you to combine the plane of the hatch frame with the plane of the ceiling.
Quite often, the attic stairs of the Fakro are simply irreplaceable. Fakro produces quality products that you can install yourself. To fix the product according to the second method, you need two screws that are installed at the back, the same amount of fasteners will be needed for installation in front. They strengthen the staircase. After completing installation work, the master, who is on top, removes the auxiliary boards and opens the structure.
The nuances of the work
After the ladder has been laid out, it must be fixed with two screws, filling the gap with insulating material. If necessary, you can install an opening guard and handrails. Auxiliary boards in the process of installing temporary supports are fixed to the bottom of the opening.