Laminated PVC panels have gained popularity among home craftsmen due to their qualities: durability, aesthetics, and ease of installation. When installing such material, the wizard will not have any difficulties, since the panels do not imply the need for special skills. The panels are quite easy to maintain, and during installation they are very easy to process. They can be cut as well as drilled. After completion of the work, the room takes on a unique look. Walls become resistant to the negative effects of moisture and temperatures.
Material Features
Laminated PVC panels look like plates, the main component of which is polyvinyl chloride. If you cut the canvas, you can see a structure that resembles a honeycomb. The front surface is protected by a decorative film. During installation it will be quite easy to dock the panels, since each of them is equipped with a thorn-groove-type locking connection. This allows you to successfully hide the joint seams. The finished surface is flat and perfectly smooth. The material looks great, and in building materials stores you can choose from a wide range. Laminated PVC panels can be combined with other materials, which allows you to get unusual design solutions.
Durability and moisture resistance
Such material can be used for a long time. It is not prone to rotting and corrosion processes. Installing canvases is quite simple also because they are lightweight. This quality simplifies the transportation and unloading process. The panels are well exposed to moisture, so they are often used in rooms that are characterized by a high level of humidity. The material is practical, easy to wash, and if necessary, damaged elements can be replaced. If you are interested in the issue of environmental friendliness, then it is worth noting that moment that the described panels meet these requirements.
Features of the installation
If you decide to choose laminated PVC panels for wall decoration, then initially you will need to prepare some tools, namely: a drill, nails, self-tapping screws, wooden blocks, as well as a hammer. The bars must be fixed to the wall surface so that a frame is formed. Panels will subsequently be installed on it. If necessary, the canvas can be cut using a construction knife. Such a task during the installation process will certainly confront the master, because you have to dock the panels in the area of corners or in difficult areas of the room. In order to adjust the size of the canvas, you must first make markings using a ruler and a pencil. Using these tools, it is necessary to draw a straight line on the front side of the panel, along which the cut will be carried out. It is not worthwhile to go deep into the surface during these works, since the canvas is cut only from above. Next, you need to put it on the corner of the table, and then break it.
Installation Recommendations
Laminated PVC panels, photos of which can be found in the article, can also be used for decorating the ceiling. In this case, you can not be afraid of flooding from above. To carry out such work, it is necessary to purchase panels that will ensure a minimum number of ceiling joints. In this case, it will be possible to ensure maximum tightness of the surface. With the help of such a finish, it will be possible to hide defects and communications in the educated space. This method of decorating the ceiling allows you to save money, because you don’t have to work on eliminating the unevenness of the ceiling. If a good ventilation system is installed in the bathroom, then Vek PVC laminated panels can be glued directly to the wall surface. This will save free space in the room, which is especially true for bathrooms of multi-apartment buildings. For such work, silicone or acrylic adhesive should be prepared . However, this approach is only advisable if the walls are perfectly even.
Seam filling
After the installation is completed, prepare a solution for filling the joints. This should be done with a rubber spatula or grater. Excess composition will need to be collected and re-applied to the seams. After the solution dries a little, its excess will need to be cleaned from the surface of the panel with a sponge. The latter will need to be pre-moistened in clean water. If you choose laminated PVC panels for a balcony, then you need to install using the same methodology. In this case, the material suggests the possibility of using an insulating layer. After the installation is completed, and the adhesive and filler joints dry, you need to wipe the finish with a flannel fabric.
Installation of laminated panels
If the laminated PVC wall panels will be used as the wall decoration , then every nuance of installation must be taken into account. The canvases can be arranged horizontally, vertically or diagonally. Each of these methods has its pros and cons. Diagonal technology will leave the most waste after completion of work. This will increase the cost of the work. If the panels will be fixed on the adhesive, they must be installed vertically. The composition should be applied in horizontal stripes, the width of which is 6 millimeters. The distance between them should be equal to 20 centimeters. After the panel is pressed to the surface, in this state it must be held for several seconds. If you choose laminated PVC panels for a balcony, a photo of such a finish can be viewed in the article. Regardless of where the described cladding is installed, a frame can also be used. The evenness of the final wall will depend on the correctness of its position. You can analyze the location of the frame elements using the building level. The distance between the bars or profiles should be equivalent to the width of the panel. Thus, the interpanel seam should be located in the middle of the bar.
Wizard Recommendations
When choosing a finish, the different colors of the laminated PVC panels will allow you to create unique design solutions. However, it is important to ensure the strength of the fastener, which will also ultimately affect the aesthetics. Depending on what material will underlie the frame, you can use a stapler, screws or nails to install the panels. It is necessary to screw or drive them into the rails that make up the elements of the frame, to move them apart from each other by a distance of 25 cm. This will ensure that the location of the fasteners is invisible. If the walls have significant irregularities, then you can get rid of this problem by inserting bars under the elements of the frame.
Conclusion
At the last stage, it will be necessary to install the appropriate fittings according to the type of moldings, corners and baseboards. These elements provide additional fastening of the finishing material. Using them, you can give the walls or ceiling a complete look. The fittings will help to decorate all the joints, external and internal corners, as well as the edges. Observing all the rules of the work, you will be able to achieve the desired effect, which involves the creation of perfectly smooth, aesthetically attractive walls. In addition, you can enjoy unsurpassed quality, which is guaranteed by the manufacturer for several decades.