Due to the fact that material processing technologies are developing more rapidly, obsolete equipment is losing value. This also applies to laser engravers, which were recently sold at prices that were inaccessible to the ordinary consumer.
Today, such devices can afford not only large-scale enterprises, but also private consumers. Their use simplifies the engraving and processing of materials in other ways. In order to make the right choice, you should familiarize yourself with the opinions of consumers and the cost of the described technique.
Engravers of the brand Neje
If you are interested in laser wood engravers, then you should pay attention to the Chinese Neje devices, which are available in a wide range of capacities. Using this device, you can perform any kind of engraving on materials from polystyrene foam to wood and plastic.
The devices have an individual design, and are supplied with accessories that expand the scope of activity. Customers especially like the DK-8 Pro 5, which has a capacity of 500 mW. Using this device, you can engrave materials, including plastic, rubber and wood.
Even if the master does not have the appropriate experience, he will be able to use the machine. According to consumers, the equipment is capable of performing a huge number of operations. The cost of this laser wood engraver is 5500 rubles. It is noteworthy that the unit allows you to work in conjunction with software for Windows.
Having set the necessary settings, you will prepare the equipment for work, which is very simple. The program does not require certain skills from the operator. Do not use this device for acrylic, metal, or other flame retardant materials. This wood laser engraver comes with safety glasses, two USB cable ports, as well as a key and a user manual.
Diy Engraver Reviews
An alternative market offer is Diy engravers, which are supplied by the company in a wide range of capacities. This parameter can reach 8000 mW, while the minimum value is 2100.
The machines are designed for engraving and cutting, and the choice of a laser is determined by the thickness of the material and the speed of drawing the pattern on the surface. The software of the device is of high quality and makes the work convenient and easy.
According to consumers, to perform engraving it will be necessary to select a pattern and start the device. With this model, you can cut and engrave using different materials. You can achieve better results if you apply:
- wood;
- acrylic;
- cardboard;
- plywood;
- plastics of any composition.
The described wood laser engraver has compact dimensions and weight. You can use the device to solve business issues at home. The cost of a particular model will depend on the radiation power.
KL 3020 Standard machine reviews
A laser wood engraver, the price of which is 37,100 rubles, is a machine for engraving and cutting non-metallic materials. Consumers like that the size of the desktop is quite impressive and is 300 x 200 mm. The design has water cooling, which makes the service life longer.
The software is presented in Russian, which simplifies operation. The machine has compact dimensions: 80 x 50 x 5 cm. This laser wood engraver is widely used in medium and small businesses. The equipment is used in the following areas:
- polygraphy;
- advertising production;
- souvenir production.
The machine can be used for cutting 4 mm plywood, making stamps and seals, as well as cutting and engraving. As the material to be processed, it should be highlighted:
- paper;
- acrylic;
- plywood;
- cardboard;
- felt.
Complete with a laser wood engraver are delivered:
- laser tube;
- air compressor;
- water pump;
- smoke exhaust system;
- cable set;
- compact disc;
- focal length meter;
- USB dongle.
Cables are designed to connect the machine. A disk with drivers and software will simplify operation. Consumers like the fact that the laser tube is already connected to the machine and installed.
The equipment is equipped with a pointing beam, work area illumination, power adjustment display, emergency stop button and temperature sensor. The device connects to the computer through the port. The cutting and engraving are controlled by software. It is pre-built into the graphics editor.
Review and price of the engraver KL 6040 Standard
This equipment has a rather impressive cost, according to consumers, - 134,900 rubles. This unit is used for engraving and cutting non-metallic metals. The kit comes with a glass sealed tube, whose power is 80 watts.
The equipment is cooled by a water system. Its dimensions are 64 x 74 x 139 cm. The parameters of the working field are equivalent to 400 x 600 mm. If the price of a laser wood engraver scares you, then in addition you can familiarize yourself with the main characteristics of the equipment, which are quite outstanding.
Among them, a wide area of use should be highlighted. You can use the device:
- in souvenir production;
- in the advertising field;
- in scrapbooking;
- in engraving and cutting acrylic;
- in souvenir production.
With the help of this equipment stamps and seals are made. The device allows cutting and engraving on leather, felt and fabric.
Customization
Setting up a laser wood engraver may be accompanied by the use of a tripod with mirrors. It is fixed in front of the emitter, where the laser diode is located . This device will allow you to configure the path, but the ease of use while leaving much to be desired.
After reading the instructions, you can understand that first you need to remove the first mirror and point the laser at the target, removing it by 4 m. The spots of the red laser and working equipment are connected to each other in the next step.
Setting cost
If you have purchased a laser wood engraver, you may be interested in configuring this equipment. When it comes to software, you will have to pay 3000 rubles to configure it. Setting up the motherboard costs 5500 rubles. Setting up stepper motors will cost you 3000 rubles.