Sandwich panels have recently gained widest popularity among builders. And do not assume that they can only be used for decoration and wall insulation. Such panels are not only very attractive in appearance, but also quite durable. The material perfectly resists rotting, and due to its lightness and special design, it is also easy to mount them. Today we will find out what size OSB slabs are most suitable for the construction of an outdoor garage.
Given the excellent heat-insulating properties of these plates, you definitely do not have to worry much about heating the room. Even in the most severe frosts, condensation will not appear on the surface of the panels, and you will not even see the fungus, which is a real scourge of many buildings. Given that the size of the OSB of the plate can be very different, from them you can build a room of almost any configuration.
All of the above qualities make them ideal material for the construction of garages, the installation of which can be done even by one person. For construction you have to buy roofing and wall panels. You don’t have to worry much about the foundation, since it can be made as simple and cheap as possible. Such a garage can be built even in splendid isolation, and the time for this will take no more than a couple of days. Please note that the OSB plate, the dimensions of which can vary, is quite hard material, so be sure to stock up with a suitable tool in advance.
Before starting construction, properly prepare an appropriate site for it. This is not particularly difficult: remove irregularities, remove vegetation and stumps, and then dig trenches under the foundation.
So, the size of the OSB plate (that is, a sandwich panel from it) that you buy for the sake of construction should be at least 10 cm (in thickness, of course). It will not be superfluous to ask the seller about the availability of all necessary quality certificates. Do not forget to buy a special decorative cladding, which will serve to mask screw joints, traces of cuts and just mechanical damage. In addition, we advise you to remember about purchasing the necessary tools (if you do not have them). We strongly recommend that you use exclusively an electric jigsaw for cutting panels , as it gives the most even and accurate saw cut.
In no case do not use a grinder, since the OSB plate (dimensions, the price of which are interconnected) under the influence of strong vibration breaks very easily. Do not forget that in very severe frosts, the material also undergoes deformation, so you definitely should not forget about the device of expansion gaps (which are covered with decorative panels) . Otherwise, you will find yourself in an interesting position when, in a particularly cold winter, all panels are simply skewed.
By the way, painting or decorating the walls of such a garage is completely useless, since they are already well protected from environmental influences. If you still decide to finish the walls, then you should work with maximum accuracy, as otherwise they can be easily damaged. Of course, the structure of the panels in its strength can not argue with a garage made of reinforced concrete, but with good care it can last a dozen years (or even more than one). In addition, if necessary, it is easy to disassemble and rearrange it to another place.
We hope you now know not only the required OSB size of the slab, but also other construction features from this material.