The Crosser companies motor-blocks recently are in great demand. The gearboxes they produce are mainly belt-type. On average, the power of diesel-type motoblocks does not exceed 5 kW. Fuel consumption in devices is quite different.
Engines for walk-behind tractors are usually installed in a three-stroke type. Not all modifications are suitable for processing hard soils. Nowadays, there is a good model of the presented brand in the region of 55 thousand rubles.
Types of devices
First of all, devices differ in type of engine. On the market are modifications with asynchronous and three-stroke devices. The cooling system is used air or water type. Small modifications are made with asynchronous motors. The maximum frequency for motor blocks of this type does not exceed 5 thousand revolutions per minute. Oversized models are often equipped with three-stroke engines. The maximum frequency for motor blocks of this series does not exceed 6 thousand revolutions per minute.
What parts are needed on a walk-behind tractor?
By bundling the models are pretty much desperate. First of all, devices need replacement parts from a standard set. In this case, we are talking about a longitudinal mill, a plow, as well as wheels. Even motor-blocks quite often fail gear coils. Spare parts for the motor can always be purchased at a specialized store or service center. The cost of goods depends on the type of part, as well as on the features of the model.
Model Description CR-M2
These are inexpensive and high-quality Crosser motoblocks. It is quite difficult to get spare parts for them in the store. It is also important to note that the model uses only one plow. The wheels of the walk-behind tractor are of small diameter. However, their patency is normal. The device is suitable for cultivating the soil. The gearbox of the model is clogged very rarely.
The motor overheat protection system is used in the third class. If you believe customer reviews, the clutch works fine. The width of the plow in this case is exactly 90 cm. A contact starter is used to start the engine. It breaks down very rarely. The piston stroke of the motoblock of the presented series is only 77 mm. You can buy a model in an agricultural equipment store at a price of 59 thousand rubles.
Customer Reviews for the CR-M1
The indicated Crosser walk-behind tractors mostly get good reviews from customers. Owners appreciate the device for its robust plow. In this case, the motor uses a three-stroke type. In total, the model has two cutters. If desired, the plow can be removed without problems. The drive of the walk-behind tractor is used of a belt type. The gearbox is designed for five speeds.
The cooling of the walk-behind tractor of this series is of the air type. To refuel the device, diesel of any brand is used. Together with the plow, the walk-behind tractor weighs approximately 230 kg. The modification power is located at 3.5 kW. In terms of dimensions, this walk-behind tractor can be called rather cumbersome. For large land areas, the device is not suitable in the best way. Crosser firms CR-CR-M1 walk-behind tractor can be bought at a price of 48 thousand rubles.
Customer Reviews About CR-M5
This is a universal and high-quality walk-behind tractor. Spare parts for it are cheap. It is also important to note that the device comes with an excellent plow. Productivity of the equipment is quite high. The piston stroke of the motoblock of this series is at around 87 mm.
The motor overheat protection system is used in the second class. If you believe customer reviews, the gearbox is able to withstand heavy loads. In order to launch the model, a contact starter is used, which works instantly. The cooling system is air type. In order to process large areas, the device fits well. Also, the model is often used by summer residents. However, the motor block of this series still has drawbacks. First of all, it concerns weak adhesion.
Transmission disks often have to be changed. The tank in the device has a small volume. The manufacturer does not provide water cooling for the walk-behind tractor. On hard soils, the model is moving very hard. It is possible to buy the M5 Crossover motor-block in an agricultural machinery store at a price of 63 thousand rubles.
Modification Specifications CR-M7
The presented heavy Crosser motoblocks , as a rule, receive good reviews. First of all, this model is appreciated for its high engine power. In this case, it is a three-stroke type. In total, the tractor unit uses two plows. The height of the specified unit is 92 cm. The engine displacement of the walk-behind tractor is exactly 340 cc. see. Cooling is installed in it water type. The drive is used belt.
According to customer reviews, the gearbox of the model is well protected. Starter applied contact type. The piston stroke of the walk-behind tractor is 88 mm. The tank in this case is located in the rear of the structure. The working speed of the walk-behind tractor is a maximum of 19 km / h. The device is not suitable for cleaning large areas. The oil tank of the motoblock of this series is set at 5.5 liters. You can buy this model for only 61 thousand rubles.
Model Description CR-M8
Motoblock "Crosser M8" has a lot of advantages. Among them, it is important to mention quality wheels. The plow in this case is difficult to remove on its own. It is also important to note that the model uses a rather weak stand. Cleaning filters must be changed periodically. The maximum power of the walk-behind tractor is at the level of 4.3 kW. The user is able to buy the specified model for a summer residence at a price of 48 thousand rubles.
Customer Reviews for the CR-M11
The company Crosser diesel motoblock CR-M11 is manufactured with an asynchronous motor. If you believe customer reviews, it starts up pretty quickly. Of the features of this model, it is important to note the large weight, as well as the wide plow. He has an average landing height. If necessary, the cutter on the device can be removed independently. In this case, the engine capacity is 388 cubic meters. see. The motor block of the presented series weighs only 270 kg.
The oil tank is located at the bottom of the structure. The piston stroke at an average speed of not more than 47 mm. The operating speed of the equipment is 12 km per hour. The gearbox is used with a belt unit. The maximum power of the walk-behind tractor is 3.3 kW. The drive in the device is used belt type. The minimum power of the walk-behind tractor is 1.2 kW. The standard modification kit has three plows to choose from. In this case, the minimum operating speed is 2 km / h. If necessary, the cutter can be ground independently. However, it is important to note that it is sometimes very difficult to install it in its former place. The starter deserves special attention in the device. In this case, it is of the contact type. The maximum frequency of the walk-behind tractor is 4 thousand rpm.
For suburban areas, the device fits well. The cylinder diameter of the modification is 30 mm. The oil tank of the motor block of the presented series is designed for 4.5 liters. According to customer reviews, the gearbox works well. Disks in this case wear out very slowly. For cultivation of solid soil, the device is great. It is possible to buy the specified Crossover motor-block (diesel) in the agricultural machinery store at a price of 57 thousand rubles.
Customer Reviews About CR-M6E
In order to cultivate agricultural land , these walk-behind tractors are quite often used. In this case, the cutter is applied with a small width. If you believe customer reviews, the plow height can be set up quite simply. The cutter is connected to the walk-behind tractor without any problems.
The drive in the device uses a belt type, and the engine is installed three-stroke. The maximum power of the motoblock of this series is 4.4 kW. The cooling system is used air type. In total, the model has two nozzles. The Crosser brand CR-M6E walk-behind tractor can be purchased at a price of 59 thousand rubles.
Modification Specifications CR-M8E
The specified walk-behind tractor has pretty good characteristics. The rated power of the model is as much as 4.4 kW. It is also important to note that the maximum frequency is around 4 thousand revolutions per minute. The piston stroke at maximum power is not more than 82 mm. The motor overheat protection system is used in the third class. The motor block of the presented series weighs as much as 180 kg. The cooling system is air-type. The oil tank in the device is installed near the gearbox. The starter is applied in high quality. The company "Crosser" motoblock CR-M8E can be found at a price of 66 thousand rubles.
Model Description CR-M10E
The Crosser brand CR-M10E motor-block is ideally suited for processing soft soils. Patency is at an average level. The fuel tank in the structure is installed next to the engine. The rated power of the unit is at around 4.5 kW.
Together with the plow, the device weighs exactly 240 kg. The engine overheat protection system is used in its third class. It is also important to note that the walk-behind tractor has a good milling cutter. A convenient handle deserves special attention in the device. At maximum power, the maximum stroke of the cylinder is 78 mm. You can buy a motor block of the presented series at a price of 63 thousand rubles.
Customer Reviews for the CR-M12E
Motoblocks of the presented series are great for farming. Their maximum power is 3.3 kW. In this case, the drive is used of a belt type, and the frequency fluctuates around 4 thousand revolutions per minute. If you believe customer reviews, the gearbox can last for many years. Disks she practically do not wear out. The engine displacement of the walk-behind tractor is 87 cubic meters. see. In terms of dimensions, this technique can hardly be called compact, and it weighs as much as 213 kg with a plow. On the market, for the presented motoblock, sellers ask about 53 thousand rubles.