Modern Indesit refrigerators manufactured under the Italian brand in the Russian city of Lipetsk have a good price-quality ratio for the average consumer. The large sales volume of these household appliances throughout the country indicates that the percentage of premature breakdowns in this brand is low. Nevertheless, not a single equipment is insured against this, and the Indesit refrigerator, which malfunctions are also possible, is no exception. This article will describe the possible causes of inoperability and their solution.
Refrigerator "Indesit". Malfunctions that may occur during operation
A modern refrigerator (photo below), including this brand, is equipped with an electronic control system that allows you to not constantly adjust the temperature of the refrigerator and freezer.
It is enough to choose the optimal mode and not change it. From time to time, you can use additional features such as quick freeze, vacation mode. All this, of course, improves the usability of the device, but electronic systems are more sensitive to power surges and power outages. Against this background, and not only, the Indesit refrigerator itself is also subject to functional impairment. Faults can occur for various reasons. Depending on the severity of the breakdown, repairs can be carried out both independently and with the help of a professional craftsman.
Start-up relay malfunction
Failure of this element of the system can cause a rise in temperature in the refrigerator and freezer. The fact is that the start-up relay is responsible for starting the compressor, which starts to drive the refrigerant. The cause of such a malfunction may be “sticking” on the motor contacts. To identify it, it is necessary to check the connectors for water, which can lead to a short circuit.
Also, if before that the owner of the device independently repaired the Indesit refrigerator, the malfunctions of which violated its operability, once again it is worth checking the correct connection of the terminals on the compressor. Such an error can cause a short circuit, which will lead to the burning of the start-up relay. Therefore, it is better to entrust the repair of your equipment to a professional master, he will not only select the right spare parts for the Indesit refrigerator, but also competently replace a failed system element.
Another reason for this malfunction is a malfunction of the temperature sensor, which does not transmit information to the start-up relay, so the compressor is in standby mode.
Faulty Indesit Nou Frost refrigerator
Now such models are very popular. This system allows you not to worry about defrosting the refrigerator; an ice coat simply does not form. Although it is worth noting that ice can still appear, and this is the reason for the malfunction. The Indesit refrigerator, the fault of which is the formation of a snow crust on the walls of the appliance, may need to replace the rubber gaskets located on the doors. The fact is that when warm air enters the chambers, it is converted into ice, which settles on the walls of the device.
Fan out of order
This fault is indicated by an error in the display "F04". There are two ways to solve the problem: check the integrity of the circuit between the fan and the board responsible for its operation. To do this, measure the resistance or connect the device directly to the network.
If the first option disappears, then you will have to order new parts for the Indesit refrigerator in a specialized service center.
Defrost heater does not function
This fault is indicated by the error "F07" on the display of the refrigerator or three LEDs that are on at the same time.
It is worth noting that the errors that appear on the display of the device do not always correctly indicate a real breakdown. The command unit of the refrigeration unit is a complex system, which is characterized by failures. Therefore, it should be borne in mind that signaling errors are only alleged faults that must be checked before being repaired.
In this case, as in the case of a fan malfunction, first of all, it is necessary to check the presence of resistance in the circuit on the J6 connector. If it is normal, then it is worth checking whether the thermal fuses are open. If this does not help, then most likely the defrosting heater could burn out, then it only remains to replace the failed part by ordering it at a specialized service center and inviting a qualified craftsman to repair your refrigerator.
Compressor malfunctions
This is the most important part of the refrigerator, and the vital activity of the entire device depends on its proper operation. The most common reason for compressor failure is the long-term operation of the unit. Also, the "heart" of the device can junk due to power surges and power surges. As practice shows, modern compressors are practically not repairable, and therefore it will have to be completely replaced or think about buying a new refrigerator. In any case, if the device constantly drives the refrigerant, the temperature in the chambers is different from the norm or the compressor makes unnatural sounds, you must call the refrigerator repair wizard, who will establish the exact cause of the malfunction.
Freon leak
Although the modern refrigerator (photo below) is crammed with electronics and the LEDs and control display signal almost any malfunction, some malfunctions can be detected only after vigilant observation of the operation of the device or a thorough examination of its internal mechanism.
A striking example of this is refrigerant leakage. Symptoms of this malfunction when the Indesit refrigerator is operated in standard mode are:
- The appearance of a snow coat in the chambers of the device.
- "Indesit" (refrigerator) does not freeze. Deviation from the norm in one or immediately in both temperature chambers.
- Swelling of the rear wall of the refrigerator, noticeable to the naked eye.
- Continuous compressor operation.
Most often, freon leakage occurs in refrigerators, the freezer of which is located below. The two chambers are interconnected by a heat pipe, through which the refrigerant is chased. It is this arrangement that is most successful for preventing the formation of condensation on the walls, which is achieved by reducing the temperature difference. But even a small amount of water vapor can cause corrosion damage to the heat pipe, which can subsequently cause a malfunction in the operation of the refrigeration unit.
Inert gas, freon, is used as a refrigerant in such devices. It has neither taste nor smell, therefore its leak without special equipment is impossible to detect. Freon in large quantities can cause human poisoning, but the amount used in the refrigerator can not have negative consequences for the body.