C44 professional flooring is considered one of the best materials for exterior wall cladding and roof construction in residential and industrial facilities. In addition, it is used as an integral element of the protective structures. The main advantage of this material is its low price.
Production
For the production of this decking, steel sheets of a certain thickness are used. Then the rolls of this metal are loaded into the machine. Waves in the form of a trapezoid bend out of a perfectly flat sheet; this is all the work done by a bending machine, in which standard sizes are pre-set.
With the help of scissors, as well as the guillotine, these sheets are marked and cut. Thickness and width are taken from GOST about this product. These options are standard. The length of the sheets may be different.
After the sheets are made, they are painted. Special powder paint is used. Work is carried out using a spray gun, apply polyester, polyester or varnish, this is the last layer. In addition, there is an initial layer, mainly when painting, three layers of paint are used.
Features
The main features of C44 corrugated board are rigidity and lightness. Thanks to these indicators, it is resistant to strong winds, easy to install and carry. For its production, sheets with a thickness of 0.5–0.9 mm are used.
Scope of a professional flooring C44
- Build various structures and utility buildings.
- Apply to overlap roofs.
- They build walls and partitions in the form of shields.
- Erect fences and fences.
- Reinforced concrete formwork is being constructed, without subsequent removal.
- Construction of special building frames to give them strength and rigidity.
A wide area of application of this material has found its purpose in the overlapping of roofs. Thanks to the cover from the profiled sheet, the snow does not do any damage to it, all other atmospheric influences are not terrible for this roof.
Thanks to the ribs made during the production process, which give rigidity to this sheet, various structures of both domestic and purpose are built from it.
Profiled sheet sizes
This sheet is intended for the construction of wall partitions, the strength corresponds to sheets with H and HC characteristics, so it can be used for load-bearing walls. The scope of use is quite wide and diverse, due to its strength and stiffness, sheets are very in demand in construction.
Standard sheet options
- The wave has a height of 44 mm.
- Sheet width 1000 mm.
- The length may have the following dimensions 0.5-12 m.
- The weight of C44 corrugated board is 5-8 kg.
- The thickness of the sheet is 0.5-0.9 mm.
The specified width in this list is useful. It is used to calculate the required amount of material, since the required value for connecting these profiled sheets has already been deducted in its designation. This value is calculated by the manufacturer and taken for 47 mm.
When choosing profiled sheets for the roof, it is necessary to take a sheet thickness of 0.7 mm. If you plan to build buildings, hangars, sheds and the rigidity of wall coverings and partitions is important, you need the largest figure - 0.9 mm.
During installation, this material is very easy to transport and climb to the height of the roof. If this work is necessary, it must be carried out carefully so as not to violate the outer protective layer of the profiled sheet.
How to choose corrugated board
The surface of these sheets may have a different coating. Issue:
- galvanized corrugated board C44;
- aliminezinc;
- silicate aluminum;
- with polymer dyes.
Currently, the most popular and sought-after is C44 profiled sheeting with a polymer coating, as it has a lot of different colors and shades. The sheet has a zinc coating on one side and polymer dyes on the other.
The most profitable will be the purchase of this material at the manufacturer's factory, since the price of C44 corrugated board (on average it is 300 rubles sq. M.) Will be several orders of magnitude lower, especially when purchasing in bulk. If the client needs a sheet with fewer waves or a different shade, all these characteristics can be ordered from the manufacturer. Let's consider further what characteristics C44 corrugated board has.
Main characteristics
This material has high resistance to corrosion and atmospheric environmental influences, so it is suitable for areas with difficult climatic conditions, especially with high rainfall.
Sheets are issued:
- C 44 A 0.5 - C 44 A 0.9. They have a useful width of 1050 m, while the thickness of the sheets is 0.5-0.9 mm, the weight per square meter is 5.5-9.4 kg.
- Sheets C 44 A B 0.5 - C 44 A B 0.9. Useful area 1050 mm, 0.5-0.9 mm thickness, weight 5.5-9.3 kg.
All sheets have trapezoidal waves. There are 6 such waves in the standard sheet, the height of this recess is 4.4 cm, the width is 3.5 mm, and a distance of 100 mm is observed between the waves.
If a sheet with the characteristics of HC 44 1000 is selected for construction, this material will cost more and the weight will be 100 grams more than that of sheet C 44. Sheet C 44 is intended for covering and erecting walls.
This material is able to withstand high loads, has high strength and rigidity. Since the material is not heavy, for its installation you do not need to call expensive high-altitude loading and unloading equipment.
The letter C indicates that this profiled sheet is intended for walls, the marking in the form of the letter “K” is for roofing, “H” is for flooring and formwork, which then does not need to be removed, and “HC” for coatings and walls.
Due to the fact that the corrugated board is almost universal, C44 sheets marked with are used both for walls and for roofing.
By appointment, the division of corrugated board into different brands is rather arbitrary. So, for example, C44-1000 professional flooring is equally used for the construction of wall fencing, and for the construction of the roof of residential buildings.
For the production of this material use the following blanks:
- Cold rolled galvanized steel.
- Rolled metal with aluminum-zinc coating.
- Rolled thin sheet aluminized and aluminum silicon coating.
- Rolled metal and electrolytic zinc coating.
In construction, these sheets are used:
- for a roof with a crate of 2 meters, while any bias;
- for the construction of utility purposes: these are garages, warehouses, hangars, pavilions for trade, warehouses;
- for fencing construction sites and construction sites;
- civil and industrial facilities.
The widespread use of this building material is due to its high wear resistance, strength and reliability. In addition, its cost is acceptable, also these sheets can be used several times.
C44 professional flooring is used for construction of fences and protections, in the conditions of influence of a strong wind. Suitable for fencing various objects and warehouses built in the field, as well as for other areas that are not protected from the wind.
These roof covering sheets can be used in the central part of the Russian Federation. Due to the wide and varied color scheme, this material is also used for the construction of fences. At the same time, the courtyard is stylish and sophisticated thanks to the combination of colors.
Also, C44 corrugated board can be used for construction and cladding of facades of various structures, such as summer kitchens, garages, baths, sheds. This coating will serve as a protective, durable and at the same time decorative decoration of any yard.
To select the color you need to contact the manufacturer or see all the data of interest on the Internet. On the website of the company representing this manufacturer, you can study in detail all sizes, length and width, color shades of corrugated board.
Conclusion
This material is very durable, reliable and inexpensive, thanks to these characteristics, it has become very popular throughout Russia. Indeed, in addition to protective functions, with its help, buildings are given an elite and prestigious appearance. When choosing bright colors, you can create a bright and cozy courtyard that will delight not only the owner, but also all passers-by.