The Makita LS1040 saw is a trimming device that can be used for sawing wood, soft metals, plastic and laminate. This tool has a fairly small size, but differs in power, which allows you to cope with the tasks. Experts do not advise purchasing such a device for solving everyday problems, since the price of equipment is quite impressive, but it is intended for professionals. Such devices are not always convenient for the average user, as they have impressive weight and high power. The last circumstance suggests that you overpay for the unit, since you will use it quite rarely. It is best to consult a specialist if necessary cutting metal, wood or plastic. Carrying out such work will cost inexpensively, but if you buy a similar tool to solve your own needs, then it most likely will not live up to your expectations.
Key Features Reviews
The Makita LS1040 saw works at the expense of the engine on 1650 W, and cuts using a big saw disk. The master will be able to use workpieces with a maximum width of 95 millimeters. As users emphasize, using the shaft locking functionality, you can change the equipment. The landing diameter of the disc is 30 millimeters, while the diameter of the cutting element is equivalent to 260 millimeters. The maximum cut depth is 67 millimeters, which is true for an angle of 45 degrees. This parameter increases to 95 millimeters if the angle is 90 degrees.
Along with positive characteristics, consumers distinguish negative ones, among which such as the lack of backlight and speed control. The experienced users are also upset that there is no possibility of horizontal movement. Model Makita LS1040 has a fairly impressive weight, which is 11 kg, but this is normal for this kind of equipment. The device operates due to the brush motor. When purchasing such a unit, you should pay attention to the fact that you will not be able to adjust the depth of cut, as well as use a laser. All shortcomings are successfully compensated by positive features, for example, a rather impressive cable length, this parameter is 2.5 meters.
Additional Feature Reviews
Saw Makita LS1040 is a rigid structure that can be used for accurate cutting of different materials. Consumers like that they can take advantage of the oblique cut to the left, while setting the angle from 0 to 45 degrees. The presence of a rotary line provides a fairly convenient support for the bar. This tool is chosen by professionals, as it copes with such tasks perfectly. If you use special saw blades, according to customers, you can use the equipment even for cutting aluminum profiles.
Usage Reviews
The Makita LS1040 saw is assembled on a sturdy horizontal bed on which a turntable is fixed. The latter allows you to set the cutting angle. In the side of the turntable that is farthest from the master, the rotary lever, which is a pendulum, is fixed. On it is an electric circular saw. Experienced craftsmen advise to feed the workpiece along the guide, and the angle of cut with respect to it can be selected by turning the circle. In order to adjust the angle, it will be necessary to loosen the handle. Consumers are advised to turn it counterclockwise. As soon as the handle is in the position where the arrow points to the desired angle, it is necessary to fix this element by turning it counterclockwise.
Usage Safety Instructions
Makita LS1040, the operating manual of which must be read by you before using the tool, is used in conjunction with safety glasses. It is important to properly prepare the place of work. This implies that it is forbidden to use the saw near flammable gases or liquids. Before work, you need to check the disk for damage or cracks. If any were found, then the item should be replaced. Experts advise using only those flanges that are designed for a particular model. It is important to prevent damage to the shaft, flanges or bolts. If this happens, the disk will go bad.
The wizard should make sure that the swivel base is locked correctly, it should in no case be moved during operation. Before the Makita LS1040 cross-cut saw is launched, it is necessary to remove chips and small elements from the table. The operator should avoid cutting the material along the nails. Before starting the manipulation, you need to check and make sure that there are no fasteners in the workpiece.
Saw Blade Installation Instructions
Before installing or removing a disk, it is important to make sure that the tool is turned off and that the plug must be unplugged. Use the socket wrench when removing the disc. The central casing must be held, and then rotate counterclockwise. It is necessary to press the lock so that the disk does not rotate. Next, using the crosscut wrench, you loosen the hex bolt, flange and disc clockwise, then install a new disc. The direction of the arrow on the surface of the disc should coincide with the arrow on the casing.
Dust bag operation recommendations
If you purchased a miter Makita LS1040, then it is important to know how to use each part of the tool. This also applies to a dust bag, which should be used for accurate work and easy garbage collection. To connect the bag, you need to insert a nozzle into the dust outlet, and then fix the mounting holes of the element around it. As soon as the bag is half full, it should be disconnected from the tool and also open the clasp. The bag is freed from the contents, shaken, which will release it from particles, as well as from the material that has got inside.
Saw angle adjustment
Before starting service or repair work, make sure that the equipment is turned off and the plug is unplugged from the outlet. Quite often there is a need to adjust the saw angle. The machine is regulated at the factory, however, during the operation, additional adjustment may be required, which should be done in several stages. To begin with, the clamp that secures the swivel base loosens. It must be rotated so that the pointer is at 0 degrees of the scale of oblique angles. The clamp should be tightened, and then loosen the hex bolts on the stop. A right angle is set between the plane of the disk and the guide stop, while a rectangular triangle should be used.
Instructions for cutting samples according to the template
Makita LS1040, the reviews of which were presented above, can be used for cutting parts according to the template. In order to increase work efficiency, one should use stacked plates, which are supplied separately. The master draws a line for cutting the sample on both sides of the groove on the plate with a long hole. Next, holding the sample, you must move the stacking plate along the edge of the sample. The plate is fixed with a screw. If you are not using it, loosen the screw and move it away.
Conclusion
Quite often, consumers are interested in where to buy original spare parts for the Makita LS1040. If any element fails, it is best to contact a service workshop where they can pick up a component of the structure and install it in place. As practice shows, spare parts for the described model of the saw are quite affordable, they can be purchased almost everywhere. It is only important to exclude the purchase of a fake, which is why it is recommended that the seller require quality certificates for the products.