Paddle type mixers are actively used in the industrial field. The rotor for them is most often selected of a two-phase type. The power of the device is very different. When choosing a modification, it is important to pay attention to the power, as well as the frequency of the mixer.
Many lining models use a small thickness. The vibration level of such modifications is extremely low. The user is able to buy a high-quality paddle-type mixer at a price of 30 thousand rubles.
The principle of operation of devices
The principle of operation of paddle-type mixers is based on the rotation of the output shaft. This effect is achieved through the use of motors. As a rule, they are used at 4 kW and operate at a frequency of 44 Hz. Protection systems are available in different classes. To stabilize the shaft there are keys. Clips are installed in the upper part of the structures. If we consider closed mixers, then they use lids. Capacities are most often selected in a small size. However, in this case, much depends on the power of the device.
Domestic use
In everyday life, mixers of this series can be used in the repair of an apartment. Using a closed-type model, the user is able to easily mix cement. Modifications are also allowed to be used as a mixer. In cooking, devices are also successfully used. They are good for making creams.
Industrial applications
On construction sites, mixers (paddle) are quite common. Also, devices can be seen in cosmetology factories. For kneading creams, they are good. Powerful modifications are used in Pancake week plants.
Parameters of the SB-146-A series devices
This propeller stirrer has many advantages. First of all, experts note a quality gearbox. The blades of the modification are used quite wide. Some experts are burning that the modification is great for preparing solutions. In this case, the permissible overload level is at around 5 A. The protection system at the mixer is used in the PK23 series. The shaft of the modification is set to 5.3 cm. The motor for the device is selected a three-phase type. An anchor is installed with a lining. The speed of rotation of the mixer is regulated by the module.
The level of limit vibration at the mixer is only 5 N. A thrust bearing is not provided in this case by the manufacturer. Some experts say that the modification can be used in the cosmetic field. However, the rotor does not withstand large overloads. It is also worth noting that the mixer is made with a channel modulator. She does not have a soft start option. The user is able to purchase a mixer of this series at a price of at least 45 thousand rubles.
Features of mixers of the SB-148-A series
This mixing device is ideal for cosmetology enterprises. If you believe the reviews of experts, the gearbox is used in high quality. The permissible overload parameter is at 5 N. The PK55 protection system in this case is available. Some experts point to a small shaft. Frequency is at least 2300 rpm. The shape of the blades resembles petals.
For thick creams, the device is not the best way. The thrust bearing in this case is available with a lock. The gearbox is standardly fitted with a gear mechanism. Only one key is used to protect the shaft. The user can purchase this paddle type mixer at a price of at least 40 thousand rubles.
Advantages and disadvantages of the SB-150-A mixers
The specified mixing device is very popular. For domestic needs, it fits great. If you believe the experts, the device is allowed to be used in the industrial field. The thrust bearing in this case is designed for large overloads. Directly, the gearbox operates at a voltage of 220 V. The frequency of the device is at the level of 3200 revolutions per minute.
For thick creams, the device is not suitable. The unique design of the blades allows you to whip the cream. The lock for the modification is available with a dipole adapter. The maximum load parameter is at 5 N. The P40 protection system is not provided for by the manufacturer in this case. The working temperature of this mixer (paddle) is at 55 degrees. For mixing oils, the device is used quite often. In this case, the rotor has a two-contact type and operates at a voltage of 230 watts. The cooling system is used in the KE20 series. The shaft in this case is used at 3.3 cm. According to experts, the conductivity of the mixer is quite high. At the same time, the case is very easy to clean and very easy to transport. A wide cover plate is used over the shaft that protects the housing. Spare parts are available at the service center. The blades of the modification are quite narrow. The user is able to buy a model at a price of 34 thousand rubles.
Parameters of devices of the SSU-400 series
The specified blade type mixer is made with only one gearbox. If you believe the opinions of experts, the shaft is used at 3.4 cm. Also, experts say that the device weighs extremely little. The modification power is 5 kW. The energy consumption of the mixer is not more than 60 watts. The P40 protection system in this case is absent. Some buyers note a large number of modes in the modification.
The modulator for control is selected by the dipole type. The key in this mixer is extremely rare. If we talk about the shortcomings, it is important to note that the model is not able to work with oils. At the same time, the gear unit cannot withstand large overloads. The working temperature of the modification is at the level of 30 degrees. The length of the blade is only 4.5 cm. In conditions of high humidity, the mixer must not be operated. The user is able to buy a modification at a price of 45 thousand rubles.
Features of mixers of the SSU-430 series
These vertical mixers are designed for heavy loads. The container they have is quite voluminous. If you believe the opinions of experts, then this mixer is not afraid of overloads from the network. The working temperature of the blade device is 45 degrees. The rotor is installed by the manufacturer of a three-pin type, and the expander is used with a capacitor. Many experts say that the modification is in demand at construction sites for mixing solutions.
However, it is important to note that her performance is not very high. The installation angle of the blades is 35 degrees. A special key is used to protect the equipment shaft. The shaft in this case is used at 3.4 cm. It is also worth noting that the modification has a protective cover. In this case, the rotor box is provided without protection. Spare parts for it can be bought at a service center. A lock is used as standard with an adapter. This mixer starts very smoothly, and stops quickly. You can buy it on the market for only 55 thousand rubles.
Advantages and disadvantages of SGU-440 mixers
Said paddle-type mixer has many advantages. Experts say that the device is able to work with oils of high viscosity. For perfumery, the model fits perfectly. The rotor of the modification is used with a dipole adapter. It is also worth noting that the model is not afraid of overloads.
The blades in the device are installed at an angle of 35 degrees. In the construction industry, the model is in demand. Many experts point to good conductivity. The lock in the device is installed with one expander. If you believe the reviews of experts, the protection system copes well with impulse noise. To mix the creams, the modification is wonderful. The cover as standard is treated with a protective layer against corrosion. The modulator for controlling the mixer is a condenser type. In total, the model has five operating modes.
The parameter of energy consumption is at around 80 watts. She does not have a P30 protection system. The blades break quite rarely. However, the filter wears out often and costs a lot. The user is able to purchase a modification of this series in a specialized store for 38 thousand rubles.
Parameters of devices of the VMSh-125 series
The specified paddle mixer has only one shaft. The device is great for repairing and preparing mortar. However, it is important to note that the rotor of the modification has a through type and the permissible overload parameter is located at around 40 A. There is no P30 protection system in the model.
The mixer has an indication unit. For the preparation of liquid mixtures, the device is not bad. The expander for the device is selected dipole type. The motor, in turn, uses a three-phase type. The adapter for the modification is used of the end type. There are openings for cooling the device. The user is able to buy a device at a price of at least 44 thousand rubles.
Features of mixers of the VMSh-126 series
The specified paddle mixer is used for mixing oils of different densities. If you believe the opinion of experts, then the modification has a rotor with a high-quality blocker. Contactors work without failures. It is also worth noting that the device is in demand in the construction industry. In repair, a modification can be very useful. Buyers argue that the speed of the mixer is quite simple. In this case, the modulator is used analog type. It starts up very smoothly.
The P50 protection system is not available for the modification. The maximum temperature of the mixer is at 45 degrees. The shaft in this case is used at 3.4 cm. In total, the model has two capacitors. The cooling system is used in class KE30. Unfortunately, the filtration unit of the modification is missing. Many experts say that the model weighs little, and the rack is able to withstand heavy loads. Among the minuses can be noted a high rate of energy consumption. The price of this paddle-type mixer starts from 44 thousand rubles.
Advantages and disadvantages of VMSh-130 mixers
This paddle mixer is made with two capacitors. The motor itself is used at 4.4 kW, and its power consumption is 50 watts. The P40 protection system is not available for the modification. If you believe the reviews of experts and buyers, then the device copes with oils without problems. In this case, the motor cools very quickly. The blades in the device are at an angle of 45 degrees.
The model is not afraid of large overloads from the network. In the construction industry, this paddle type mixer is very popular. The lock is installed on her dipole type. The shaft is designed for overloads of 3.2 N. It stops during operation infrequently. The price of this paddle-type mixer starts from 38 thousand rubles.
Parameters of the RX-850-V Series
This paddle mixer is made with a contact rotor. According to experts, her conductivity is quite high. The device is suitable for mixing oils. Protection system P30 modification is not supported. The blades of the model are at an angle of 30 degrees. It is also worth noting that the model stands out in its compact size. The gearbox in the device is standardly used with a contactor. This paddle type mixer starts very smoothly. The cooling system by the manufacturer is provided for the K20 series. The expander for the modification has a channel type.
Only one modulator is used. In total, the modification supports only three operating modes. The mixer of this series copes with network overloads quite well. The maximum operating temperature of the model is 45 degrees. For kneading creams, the device is not the best way. The shaft in this case is installed with a diameter of 3.3 cm. The protective key is made of rubber. This propeller stirrer costs about 45 thousand rubles.