A correctly selected tool that will not fail at the most crucial moment is already half the good work result! In this article, we will talk about
what a shovel handle is, how to choose an already finished product or make it with your own hands.
It would seem that such a simple tool, but it is absolutely indispensable in everyday life. Especially during construction work. When the shovel handle is durable, it’s easy to work with the tool, and few pay attention to its “leading” role. But if suddenly it turns out to be too short or long, poorly fixed, then it becomes much harder to work.
The main mistake of many masters is that they hurriedly buy a shovel stalk (the price in this case is a decisive factor) and want to attach it to an existing bayonet. The result is poor. Therefore, it should be borne in mind that the shovels are divided into three types: P, B and U. Accordingly, each type has different linings and a different metal sheet, they have their own thickness and a certain size. Knowing the type of tool, you can correctly select the handle for the shovel.
So, we will clarify which damage is unacceptable for normal operation.
- Notches.
- Cracks and splits.
- Wormhole.
- The presence of rot.
- Raw knots.
- Chips.
A normal shovel handle should have a uniform uniform color and smooth surface. In general, for each tool there are special GOSTs that are designed taking into account ergonomics, possible loads and operating conditions. For example, a bayonet shovel with a handle, the price of which varies depending on the manufacturer, is made in accordance with GOST 19586-87.
As for auxiliary tools for construction, it is better to take a shovel. She copes with various bulk materials: crushed stone, expanded clay, coal, sand, gravel and so on. For this type of tool, an aluminum shovel handle is most often used. Durable but lightweight plastic is more suitable for snow removal.
Now try to make a shovel handle for yourself. We take a finished wooden rail with a section of 3 x 4 cm or cut it out of a suitable board. If for the performance of work it is necessary that the hand does not slip, you can leave it like that and not round it. In the event that this option is not suitable, with the help of a manual planer we round the corners. The end of the handle is gradually sharpened, periodically trying it on with a bayonet.
We do this until it starts to enter about half of the groove. If you did everything correctly, then the shovel handle should enter the bayonet without any problems. Using strong impacts on a hard surface, we drive it to the very end of the groove.
In order for the shovel handle to hold stronger, it is recommended to fix it with self-tapping screws. If you don’t have them at hand, you can take ordinary nails. Remains the final touch! We will go along the entire length with sandpaper, processing all small irregularities, and varnish. Your personal assistant on the farm is ready!