Miter saws with a broach are used by builders to cut the workpiece. Moreover, the design of the device allows you to choose the angle. The main material for work is wood or aluminum. However, plastic and laminate can be easily cut.
Features of miter saws
All miter saws are distinguished by a high speed of revolutions. In this case, the place of cut will always be very neat. All this allows you to use this tool in installation, as well as carpentry. At the same time, some use it to decorate the room.
Additionally, saws can be used in furniture production. Still often they are taken into service by enterprises producing windows. This is largely due to the high quality of cut metal profiles. The miter saw blades are extremely durable.
How is it arranged?
Miter saw with a broach consists of a protective casing, engine and handle. At the base of the device there is a bed with a rotary table. Under it you can see the ruler, which allows you to set the angle. In addition, a longitudinal emphasis is placed in the miter saw to fix the workpiece. An installed casing protects a person from a rotating disk. In turn, a miter saw with a broach, made by oneself, is not safe. Many manufacturers install asynchronous motors on devices. However, many prefer collector devices.
The first option will allow you to work with the workpiece completely silently. At the same time, induction motors can last for many years. Collector devices are much noisier. However, they are easy to maintain and do not require periodic inspections. In general, the location of the engines may vary greatly in different models. Most often, manufacturers install the engine in the rear. However, it does not greatly interfere with the workflow. Additionally, in such a situation, a person has a good overview of the workpiece.
Choosing a quality miter saw
The right choice of saw depends on its application. For home use, you might consider purchasing a simple modification. At the same time, the extensive functional part is not so important. Things are different with professionals in the field of construction. In this case, you need to look at completely different models.
The power of the miter saw must be at least 1800 watts. In addition, attention should be paid to the casing. With it, you can safely work with the device without risk to health. Another nuance is the dimensions of the device. Large and heavy miter saws can have good characteristics, but they are absolutely not comfortable to use.
If a person plans to work continuously for a long time, then you need to select a compact model. The ergonomics of the saw are also taken into account. The handle should be comfortable, and the workplace should be clearly visible. Last but not least, the buyer should pay attention to the device drive. Basically, it is selected based on the diameter. Acceptable is a figure of 20 cm.
Saw "Metabo KS 216M"
The power consumption of this miter saw with a broach "Metabo" has as much as 1.3 kW. In this case, the idle frequency is 5000 revolutions per minute. The diameter of the saw blade is 216 by 30 cm, which is quite comfortable. The depth of cut at an angle of 90 degrees is 60 mm, and when the angle is reduced to 45 degrees, the depth drops to 45 mm. The maximum cutting height is 120 mm. Bevel angle adjustment in this model is provided.
Additionally, it is possible to control the tilt of the device. The dimensions of this miter saw are quite acceptable. The length is 475 mm, the height is 465 mm, and the depth is only 285 mm. Moreover, the mass of the device is 9.4 kg. These miter saws have prices in the region of 6400 rubles.
What is the difference between the Corvette 4-430 miter saw?
Miter saw "Corvette" is characterized by a good indicator of cutting the workpiece. The supply voltage comes from a network of 220 V. The power of the collector motor is 1800 watts. Moreover, the disk has a diameter of 255 mm. It is made with carbide brazing. The seat size of the disc is 30 mm. Furthermore, its thickness is 2.8 mm. Directly on the disk is 40 cloves. The spindle has a diameter of 16 mm.
In addition, manufacturers took care of the pipe, which is necessary for connecting a chip pump. In this model, its size is 37 mm. The cross cut index is 75 by 430 mm. The rotation of the barrel during operation can be adjusted from 0 to 45 degrees. The inclination of the saw blade is also set in the range from 0 to 45 degrees. The gear in this model is set toothed. An oblique cut at 45 degrees is 75 to 305 mm. In this case, the engine speed reaches a maximum of 4800 rpm.
The shipping dimensions of this miter saw are pretty impressive. Its length is 830 mm, height - 520 mm, and depth - as much as 415 mm. Moreover, the mass of the device is 21 kg. In addition, it should be noted good indicators of the longitudinal stroke. More manufacturers have taken care of quality table extenders. Replacing carbon brushes is pretty quick. In general, this miter saw reviews are good. Its cost in the market is approximately 9500 rubles.
Saw "Makita LH1040"
The power consumption of this cross-cut saw is 1.6 kW. In this case, the voltage is at around 230 V. The frequency, in turn, is 50 Hz. At idle, the drive makes 2800 revolutions per minute. The diameter of the saw blade is 260 by 30 cm.
At an angle of 90 degrees, the cut depth is 130 mm. Additionally, it is possible to connect a dust remover. The depth of cut of the workpiece at an angle of 45 degrees is 85 mm. The total mass of this miter saw combined "Makita LH1040" has only 14 kg. Its value in the market is 15,000 rubles.
The new model "Makita MLS100"
This miter saw with a broach can boast a rather solid construction. Moreover, the cutting accuracy is very high. The bevel index is approximately 0.2 mm. Horizontally, this miter saw with a broach is able to rotate 45 degrees. In this case, it is possible to clearly fix the workpiece in a certain position.
In the vertical plane, the tilt of the saw is 45 degrees. There is also the possibility of sharp engine braking. This system is equipped with a special safety switch. A screw is provided to adjust the depth of cut.
Connecting a miter saw to a vacuum cleaner is quite simple. The diameter of the carbide saw blade is 255 mm. The power consumption of the device is 1.5 kW. The voltage indicator is 230 A, and the frequencies are standard 50 Hz. The thickness of the saw blade is 30 mm. At idle, he is able to make more than 4000 revolutions per minute. The cut depth at 90 degrees is 130 mm. The total weight of the device is 14.7 kg. The indicated miter saws have prices in the region of 14,000 rubles.
Miter saw for metal "Makita 2414NB"
This model is best suited for working with metal workpieces. At the same time, she is able to boast of precise sharpness. Most often, this miter saw is used for cutting cast profiles. At the same time, it is possible to work with non-ferrous metals, as well as steel. The spindle lock is provided by the manufacturer. Replacing the grinding disc is very quick and easy.
The casing is made of fairly high quality, so there is no health risk during operation. This is largely due to the unique shape of the casing. The carved disk is closed from the man from all sides. Additionally, there is a quick clamping device. Its adjustment is stepless. The cutting angle can be changed from 15 to 25 degrees. The handle in the kit comes built-in. In general, the model is very easy to transport.
Model "Makita LS1018L 6400"
This miter saw with a broach is made with a laser marking suspension. The handle has a good shape and is quite comfortable in the grip. Manufacturers release them fully rubberized. Thanks to this, the disc is very easy to control in any position.
The horizontal angle of the miter saw is 45 degrees. The power consumption of the device is 1.4 kW. The voltage is at around 230 V. The frequency of the model is exactly 50 Hz. Additionally, a good idle speed should be noted. In a minute, the disc makes more than 4000 revolutions. The diameter of the saw blade is 255 by 260 mm.
The ability to connect a dust remover is available. The total weight of the model is 19.9 kg. A device for fixing the depth of cut is provided. Also, manufacturers took care of the security system. To this end, they installed a quality casing. The cost of this model on the market is 22,000 rubles. In general, this model can be described as universal. It is perfect for both large enterprises and small workshops.