Whitewashing the ceiling is mandatory when repairing an apartment. This is a fairly quick way to give the room signs of renewal. For such a task does not require serious financial investments. Do-it-yourself whitewashing of the ceiling is an inexpensive way to clean up a room.
In our technological age, there are a huge number of all kinds of finishing options, however, whitewashing is the leading way. The freshly painted ceiling will look good and can be easily combined with any interior. Whitewashing the ceiling on its own is quite complicated, however, this is not a reason to abandon this idea. Even if you are doing the repair for the first time, then following all the instructions, you will be able to do this work yourself.
Correct whitewashing of the ceiling will be achieved only with proper preparation for work. It is necessary that the surface be thoroughly cleaned, because through white color rust or other contaminants will be very clearly visible. First you need to remove the old coating, for this it is enough to walk on it with warm water and a scraper. After cleaning, carefully inspect the surface for foreign contamination. Rust can be removed with warm water, however, after this, apply a solution of copper sulfate on the treated surface . A light, clean cloth moistened with a soda solution is suitable for removing greasy marks.
If there are defects on the surface, then they must be eliminated with putty and primer. Due to careful alignment, the whitewashing of the ceiling will take place with a bang.
After you fill up all the bumps and cracks, you should go to the primer. This is necessary so that the surface becomes smooth, and also is covered with a thin film, beyond which the paint can not penetrate. Initially, it is better to use a brush when applying a primer to hard-to-reach spots. After that, you can proceed to the treatment with a roller or spray gun. Before starting the next repair steps, let the primer dry completely.
It is worth noting that when preparing for whitewashing, you will encounter a huge amount of dirt, so it is better to remove valuable items from the premises, and cover the floor and furniture with foil. In this case, do not forget about safety, be sure to wear glasses and a respirator.
After the preparatory work comes to an end, you can go directly to whitewashing. There are two options: whitewash the ceiling with water-based paint or chalky option. At the heart of the water-based paint does not contain toxic substances, which allows whitening it with residential premises. All paints of water emulsion groups give a good white tint, and they are quite simple to apply.
The most traditional and budget option is the chalky whitewash. For her use a solution of white from chalk or limestone.
Choosing the right technology is necessary depending on the material. It is worth noting that if you apply lime mortar in the first layer, then the second layer should be the same. If you use the chalk solution as a second layer, then stains will remain. Whitewashing ceilings is a process worth starting from the window.