In the domestic market today there are tools designed to perform repair and construction work, a variety of manufacturers. Mostly on the shelves of shops you can see imported products. However, many domestic companies produce tools today. For example, the Ermak trademark, owned by Gala-Center, is quite famous. Among other things, this company supplies high-quality laser levels to the Russian market.
Manufacturer
The Gala-Center company, registered in 1990, is the largest wholesale supplier of consumer goods in Russia and works directly with many well-known manufacturers. On the shelves of Russian stores you can see its products sold in Poland, Turkey, Japan and many other countries of the world. Tools "Ermak" "Gala Center" delivers from India and China. However, despite the fact that factories are located outside of our country, equipment of this brand is being assembled from domestic components and under the control of Russian technologists. The company uses a unique technique for detecting defective products, and all manufactured products, including laser levels, are tested in the laboratory.
Main characteristics
According to many consumers, in most cases, the quality of the products of this brand is very good. All this fully applies to such an instrument as the Ermak laser level. Self-leveling models of this brand are not too expensive. In work, they can be very useful.
Performing particularly accurate checks (up to 0.5 mm) of horizontal and vertical surfaces is what the Ermak level is most often used for. The laser level of this brand comes with all sorts of add-ons that greatly increase its usability. Reliability, quality and relatively low cost have made these levels a worthy alternative to traditional water models. In terms of accuracy, they are practically in no way inferior to expensive modern laser devices of this group of the most famous and best foreign brands.
Design features
Ermak is supplied, a laser level of excellent quality, in a case quite convenient for storage. This equipment is mounted on a special tripod. Also included are glasses. Ermak levels function from 2-3 batteries (AAA) to 1.5 V. When fully charged, the device can work up to 3 hours.
Since these laser levels are made of high-quality modern materials resistant to adverse environmental factors, they can be used at air temperatures from -10 to 45 degrees. Wide coverage is one of the advantages of these tools. You can mark with their use an area of up to 25 m 2 .
Rotary dials are built into all Ermak models. Therefore, markup can be done in a 360-degree turn. The division price is 15 g. Another convenient complement to the design of these devices is a screw for adjusting the lift. There is also a built-in water level, designed for the most accurate manual marking.
“Ermak” is adjusted, the laser level is self-leveling, to the horizon automatically, immediately after installation and switching on. Of course, this is very convenient. After transferring to a new place, the device automatically starts scanning the terrain and reconfigures. The beam is generated by a laser LED. Focusing is done through lenses. If desired, one of the projections can be turned off during operation to save power. The case of all models of this brand has a smooth ergonomic pear-shaped shape. In addition to rotational ones, the Ermak assortment also has simpler levels, point or linear.
Where is used
Most often, devices from this manufacturer are used in industrial construction. However, they are very well suited for home use. With their use, you can:
spread tiles evenly and gently , porcelain stoneware or install panels;
very accurately hang pictures and photographs on the wall;
install window and door blocks;
lay cable networks and utilities.
That is, the Ermak laser level, reviews of which are simply excellent, is used where you need to arrange any elements strictly vertically or horizontally.
Advantages and disadvantages
Thus, the advantages of devices of this manufacturer can be attributed primarily:
simplicity in management;
lack of need for manual adjustment, and consequently, time saving;
brightness of LED beams.
A certain disadvantage of the Ermak self-leveling levels is the lack of verification of incorrect installation. Also, these levels do not provide disabling alignment.
Specifications
The specific parameters of the devices of this brand can be found in the table below. Such characteristics have a laser level "Ermak 659022", reviews of which are the best.
Characteristic | Value |
Beam direction | Cross |
Self Leveling Angle | 4 degrees |
Measuring range | 10 m |
Number of rays | 2 pcs. |
Working hours | 15 hours |
Storage temperature | -20 / + 70 |
Instrument weight | 0.4 kg |
Body material | ABS plastic |
Wavelength | 650 nm |
Maximum power | 1 mW |
As you can see, very good technical specifications are what distinguish Ermak devices. The laser level of this brand can be purchased in many specialized shopping centers in almost all cities of the country.
Price levels
Any Russian can afford to buy this wonderful equipment. A fairly low cost with good technical specifications - this is what distinguishes the modern level of laser self-leveling "Ermak". The price of such devices ranges from 2-3.5 thousand rubles in different regions. In some cases, Ermak can be purchased cheaper.
Instructions for use
Next, let's see how to use the Ermak laser level. Instructions for use of these devices are not particularly complicated. In principle, this device can be used exactly on the same principle as any other of the same purpose. I.e:
The tripod is installed on a solid surface as reliably as possible. The distance from the device to the surface to be marked should be several meters. If the instrument is installed too far, the measurement accuracy will decrease. During operation, the level should be absolutely motionless.
The level itself is fixed on a tripod.
A rough preliminary adjustment of the device is performed. The self-leveling angle at the Ermak levels is 4 g. And therefore, it is still worthwhile to trim it first, focusing on the readings of the bubble additional device.
Horizontal lines using equipment such as the laser rotational level “Ermak” are carried out as follows:
Similarly, the marking and vertical lines. Among other things, with the help of Ermak levels you can do:
Cross. This feature can be very useful, for example, when laying tiles to control the evenness of joints.
Laser plummet. With the help of the Ermak levels, you can not be tormented by marking on the ceiling. It is enough to draw it on the floor and move it to any necessary place.
Self-leveling laser level “Ermak”: customer reviews
Opinion on the Network about the devices of this manufacturer from home masters has developed very good. Some believe that this is one of the best domestic brands of levels to date. The advantages of Ermak devices are primarily compactness, a robust housing and low weight. Also, the advantage of these devices is the ability to use in almost any environment. In general, devices of this brand, taking into account their low cost, according to the majority, are pretty reliable and easy to use.
According to many consumers, Ermak levels are somewhat inferior in accuracy to more expensive models. However, for most work, it is in the domestic environment that these devices can be considered very suitable.
Safety precautions
Of course, the use of a laser level of self-leveling "Ermak", reviews of which, as we have found out, are mostly good, should be done in such a way as to exclude the possibility of injury. The only danger in these instruments is, of course, the beam itself. Of course, he cannot do much harm. But still, the manufacturer strongly discourages directing it into the eyes of himself or others. The power of this laser beam, like any other, is quite large. When using the Ermak level, it is advisable even to wear special glasses, which, as already mentioned at the beginning of the article, are supplied in the kit.
Thus, "Ermak" is a laser level, judging by the opinion of consumers, is quite convenient and reliable. Given the fact that it costs a lot even, it’s definitely worth buying it for use when performing various kinds of repair work in a city apartment or a country house.