The water activator AP-1 is a modern device that is designed to turn liquids from dead to living. Perhaps many people were unaware of the presence of such devices on the market for modern products. But they are. And they have earned their popularity due to the unsurpassed features and quality of water, which is real life-giving moisture. This device works from a network of 220 V, and consumes a small amount of energy. However, its performance is quite large. Thus, in just half an hour, the equipment is able to prepare about 1.5 liters of activated water, which has a huge variety of useful properties. You can buy such devices for 2640 rubles.
In some cases, when a water activator , an AP-1 electric activator is used, consumers are faced with such a problem as a breakdown of the liquid tank. In this case, you can purchase it additionally. The cost of such a component is 300 rubles. While the price of a set of indicator strips is 250 rubles, in one package - 100 pieces.
Advantages of the AP-1 activator in execution 1
The water activator AP-1 has many advantages. Among them, for example, low electricity consumption. When such a device is operated on the meter, it “wraps” exactly as much as is necessary for the functioning of a 40 W bulb. It is important to take into account the rather high speed of water treatment, as well as the unique opportunity to produce living water. However, if necessary, you can use this device to generate dead fluid, which is also called anolyte. An electric activator is used to make water at home. It has compact dimensions, low weight and ease of use. The activator of water AP-1 is certified. It has a long service life, which reaches 5 years.
The main characteristics of the electric actuator AP-1 in version 1
The equipment is powered by an electric network (220 V). The maximum power consumption is 70 watts. The maximum time of electroactivation of water is 40 minutes, and the volume of liquid obtained is 0.3 l, if we are talking about anolyte, and 0.9 l for catholyte. During electrolysis, the current strength can vary from 0.2 to 0.7 A. The weight of the equipment is negligible. It is 1.6 kg. This equipment is manufactured in Belarus, the city of Gomel. The manufacturer gives his warranty on the device, which is one year.
Activator manual AP-1 version 1
The water activator AP-1 must be used in accordance with the instructions. Before processing the liquid from the device, you must remove the top cover, and then install a ceramic glass in the center of the main container. Until it is completely filled, the water that you want to activate is poured into it. It is poured into the main compartment, while its level should not be higher than 15 mm from the top of the glass. The main container in the next step is closed by a lid. This must be done so that the arrows in the form of arrows are directed towards each other. Light anodes should appear outside the glass, while black anodes should be inside it.
Additional recommendations for use
The AP-1 device should be used according to the instructions. At the next stage, it provides for the inclusion of electrical appliances in the network. You will understand that it works when the voltage indicator lights up. It signals a job. It is important to remember the activation time of the activator, leaving it to work for a certain period. The longer the device’s functioning period is, the higher the concentration of nutrients in the water will be. As a rule, 10 minutes is enough.
Scope of delivery AP-1
The AP-1 electric activator is supplied complete with instructions for use, a measure for table salt, and a fusible insert. Before purchasing a product, you should familiarize yourself with the equipment so that there is no need to visit the store again.
Features of the AP-1 electroactivator in execution 2
This device is intended for the preparation of two types of activated water. It can be catholyte and anolyte. The last option is acidic water and has a bactericidal effect. The liquid can be used for disinfection. But catholyte is alkaline water. It tones and acts as a source of energy and a stimulant. It is noteworthy that the manufacturer puts a special glass for a set of this equipment. To pay for a set of indicator strips for this equipment you need as much as in the above case. This also applies to the cost of spare capacity. But for the equipment you have to pay 2950 rubles.
The main advantages of execution 2
The household water activator described above has almost the same characteristics as those of version 1. In just 20 minutes, the device will process about 1.5 liters of water. It is easy to use and compact. As practice shows, it is completely electrical safe. The minimum service time is 5 years. A special indicator for water is supplied.
Principle of operation
Living water can be obtained with the help of an activator of water grade AP-1 in version 2. The principle of its operation is that anolyte is formed in the glass during electrolysis, while catholyte will form in the main tank. The cover with electrodes has anodes. They are elements of black color. There are also light cathodes that interact with water and allow it to be activated. Anodes can increase the acidity of a liquid, as well as increase its chlorine content, reducing the concentration of hydrogen and nitrogen. In addition, they increase the amount of oxygen.
If we are talking about cathodes, then they make the water alkaline. Its structure changes significantly. Oxygen appears in it, and nitrogen is almost exhausted. As for free hydroxyl groups, their volume increases. The same can be said of hydrogen.
Characteristics of the activator brand AP-1 in version 3
You can get living water using a device that is manufactured and sold under the name AP-1 in version 3. This device is the most modern of the above models. This option is distinguished by a special layer on the electrodes, which in just 20 minutes allow you to get 1.5 liters of activated liquid. Among other things, the equipment has a solution saturation indicator, which is also in the units described above.
If you want to activate the metabolic processes of the body, heal wounds, increase appetite and normalize the functioning of the digestive tract, then you should use live water. She is a biological stimulant. The water activator AP-1 (version 3) allows you to get a liquid that tastes like rain and has an alkaline reaction. The prepared catholyte is recommended to be stored in a dark place. Air must not come to it. Only in this way will you be able to preserve the healing properties of the fluid, and you need to use it for a week.
Why should you use dead water?
Dead water is also called anolyte. She is the most powerful natural antiseptic. With its help, you can slow down biological processes using liquid for disinfection. It allows you to reduce pain. Anolyte and catholyte are a natural product. It is not able to cause allergic reactions, it is completely harmless and non-toxic.
Instrument Reviews
If you decide to purchase an AP-1 water activator, it is recommended to read reviews about it before going to the store. According to customers, a ceramic glass plays the role of a diaphragm. It is located between the anode and cathode. It is in it that anolyte is formed - dead water. As users emphasize, there are electrodes at the bottom of the lid. They are on the surface, which is made of insulating material and has a special black chemical coating. But the cathodes are made of stainless steel. Electrodes are not capable of undergoing electrochemical destruction.
The water activator AP-1 (version 2), according to customers, should be used at a certain temperature range, which is limited by a limit of +5 to +40 ° C, while the relative humidity of the external air should not exceed 80%. It is noteworthy that catholyte can be used to soak seeds. With it, you can stimulate plant growth, as well as enhance the properties of soluble substances. The activator corresponds to the second class of protection according to the state standard 30345.0 electrical safety. Users are confident in the hygienic safety of the activator. But this is also confirmed by the act of state examination, which was issued by the relevant authority.
Conclusion
The devices described above are quite lightweight, not at all difficult to use, compact devices. With their help, each user at home is able to get about 1.4 liters of activated water. The latter can take only 20 minutes to cook. This value is average. The minimum period is 10 minutes, while the maximum amount of time is 40.
In order to prepare the liquid, it is necessary to fill the vessel with water. After that, the plug is plugged into a 220 volt outlet. After some time, activated water can be discharged into different vessels. It is noteworthy that the liquid can be used not only to treat a person and activate the work of all his internal organs. This water is perfect for increasing the growth rate of plants that until this time suffered from various diseases and could not fully develop.