If it is necessary to install a fence, the owners of private territories are thinking about how to make an inexpensive and reliable fence. A mesh netting is perfect for this. Everyone can set up such a design, for this it is necessary to have a minimal set of tools on hand.
Observing the installation technology and choosing the right quality material, you can make a fence that will last about 20 years. It is important to inquire which types of mesh can be found on sale today. The wizard needs to study the technology in detail to avoid mistakes.
Varieties of netting
Before pulling the netting on the fence, it is important to understand its varieties. This material is made of galvanized and black wire, so the quality of the products may vary. The material from black wire is quite cheap, but it is short-lived and rusts over time, which can happen after the first rain or fog, while after 4 years the material can completely deteriorate.
You can extend the life of un galvanized netting by coating it with liquid rubber or paint. This must be done before the installation of the canvases, and after that it is necessary to update the protective layer from time to time. Before pulling the netting on the fence, you should also learn that the material of non-galvanized steel is not afraid of corrosion, so it’s ready to last longer. Such a net costs a little more, but does not need processing.
Galvanized chain-link fences look attractive and neat. You can also classify the grid according to the size of the cells, the height of the roll and the thickness of the wire. As for the cells, they can have sizes that range from 10 to 65 mm, while the diameter of the wire varies from 1 to 5 mm. The height of the roll can be from 0.8 to 2 m. However, the most popular material is one with a height of 1.5 m. The standard length of the roll is 10 m. Custom rolls of 20 m can be purchased. The material is more expensive than smaller cells because it increases the consumption of raw materials.
How to pull a grid: a step-by-step description. Welding hooks to supports
If you thought about the question of how to pull the netting netting on the fence, then you need to start work by welding the hooks to the supports. When the concrete is compacted, which will happen in about a week, you can continue to work. The mesh can be fixed with clamps or wire, but hooks are most convenient.
On sale you can find profile pipes with welded hooks, but if you have a welding machine in stock, it will be cheaper to make them yourself. To do this, use pieces of steel bar, nails, screws or thick wire. Anything that can be welded to the pipe and bent will do. Three hooks will need to be mounted on a support 2 meters high. The distance from the ground of the first hook should be 15 cm. The other will be spaced 10 cm from the top, while the third will be in the center.
Mesh mount
If you were faced with the task of how to pull a netting netting on a fence, then the next step is to proceed with its fastening. To do this, the roll is installed near the corner support, there it is necessary to rewind the material and put on the hooks of the cell. The edge of the mesh should be firmly fixed. After this, the fittings are attached to the pipe and welded. When the roll is tensioned, the net will not bend.
When its end is fixed, the roll can be moved to the next support, and then carefully unwind it. With a step from the junction of the mesh with the 15 cm pipe, a steel bar is threaded into the cells. Welding it this time is not necessary. It will allow you to evenly stretch the mesh.
As soon as it is put on the hook, the rod is removed, and the roll is unwound one more span, now again you need to take the reinforcement. If you are thinking about how to properly tension the netting on the fence, then the above scheme must be used until you reach the end of the fence. In order to connect the two canvases, use wire from the extreme vertical row.
How to eliminate sagging canvas
Even if the mesh can be pulled well, it may sag over time. Therefore, at the installation stage, it is necessary to take care of the additional fixing of the chain link between the supports. To do this, use a 6 mm wire and a welding machine. If you, too, are among those who have thought about the question of how to tension a netting net with their own hands, then it is necessary to pass the wire horizontally into the second or third row of cells. The element should be located along the entire fence.
In those places where the chain-link will be adjacent to the posts, the wire must be welded. The lower edge of the chain link is strengthened in the same way. At the final stage, the hooks must be bent. The fence canvas should be tightly fixed on the supports, while the mesh will not bend and sag.
The final stage
Once the fence is ready, you can complete the finishing touches. To do this, plastic plugs are put on the pipes, the poles are painted, and the upper antennae of the mesh are twisted 2 turns and bent down. On this we can assume that the installation of the fence is completed.
Chain link fence
If you are interested in a fence device from a mesh-netting, then you need to know that at the first stage you should equip sections. For this, poles are mounted. This can be done after clearing the site of vegetation. The territory is leveled, the master should determine the location of the extreme supports. Pipes for them should have a larger cross section than intermediate ones. They need to be deepened more.
For intermediate supports, a square profile pipe with a side of 40 mm is usually used. But for corner supports it is better to take a pipe whose cross section is 60 x 40 mm. In addition, they should be 20 cm longer. If you were faced with the task of properly installing a fence from a netting net, then you should clean the pipes from oil stains and scale, prime them and leave them to dry. With the help of a hand drill, holes are made in the ground, a sand cushion is poured into the bottom and compacted well. Next, profile pipes are inserted, which should be set according to the level.
The space in the pits is filled with crushed stone, which must first be mixed with soil. Filling should be done at 2/3 of the depth. The remaining space is poured with concrete mortar. The vertical posts at this stage must be checked again and aligned if necessary. As soon as the solution hardens, the spacers can be removed and proceed to marking under the intermediate columns.
Installation of intermediate supports
Between the corner posts, a rope should be pulled, departing from the ground 15 cm. The line is divided into equal segments that will correspond to the span. The optimal width for the fence will be a distance of 2.5 m. If this parameter is increased, the grid will sag.
How to carry out the correct installation, how to stretch the mesh-netting, you can find out if you read the article. In place of the pegs that are installed at the marking stage, you should drill holes for the intermediate posts and prepare a pillow for them according to the method described above. In order to make it more convenient to control the upper edge of the supports, you can pull a rope between the extreme posts. Now you should install the pipes, align them vertically and height, add soil and gravel, and pour concrete on top and level the surface.
Conclusion
A fence from a mesh-netting in a summer cottage will be the most profitable solution. Such a fence will not obscure cultivated plants. In addition, climbing over such a fence is quite difficult, which will allow you to prevent the penetration of unauthorized persons into the territory. You can also use such fencing for zoning on the site. You can do the installation yourself, which will save money.