The electric heater and boiler are equally in demand today. How to install such equipment will be described in this article. With this device, you can deal with the problems of turning off hot water. Among other things, such installations can work on an ongoing basis. You can find accumulative or flowing electric boilers in a wide assortment in modern stores, the latter of which are less in demand, because they are inferior to accumulative in volume and profitability. To install such a device, you can use the services of specialists or cope with the work yourself, but you will need to follow all safety rules. To do this, the electricity is completely turned off, and the hot water pipes are blocked.
Preparation of materials
If you decide to purchase a boiler, how to install such equipment, you should find out in advance. Of course, independent work is cheaper. If you refuse the services of professionals, you should prepare a certain set of materials for installation. You will need a sanitary flax or sealing tape, safety valve, two flexible water hoses, as well as two dowel-nails. When buying a water hose, you should consider that you will need two elements, each of which is 2 m long. However, the length will depend on the distance to the tie-in to the water supply system. When buying dowel nails, it should be noted that hooks should be at their ends. By the way, about the safety valve. It should be mentioned that it comes complete with an electric boiler. The valve must have a diameter of 10 mm.
Tool preparation
So, you need a boiler. How to install such equipment, you should find out before you purchase it. Do you want to do the installation yourself? Good luck! However, it is worth considering that in some cases, with independent work, the manufacturer’s warranty will be voided. In addition to materials, certain tools should be prepared, among them: screwdrivers, drills with a victory tip for attaching to a brick wall, an adjustable wrench, and a perforator. The latter can be replaced with an electric drill.
Installation Instructions
Many home craftsmen, having learned how much it costs to install a boiler, prefer to do all the work on their own. It is not surprising, given that such services cost about 5,000 rubles. There are skills and you know which side to approach the punch and how to hold a screwdriver? Then why overpay? But if you do the installation yourself, you have to get ready. Not the least role here is played by the reviews of those people who are not new to doing such a thing. If you study all the recommendations, you can come to the following.
The process should begin by choosing a place to mount in the bathroom or toilet. Most often, such equipment is installed above the toilet, where it will not bother anyone. It is necessary to check the strength of the wall, since it will have to undergo the load from the boiler. If the room has unreinforced partitions made of drywall, then you should refrain from installing the unit on them. With a boiler volume of 50 l or more, a double load, i.e. 100 kg, will fall on the wall.
Before installing a boiler in an apartment, you should determine the bottom point of the equipment, marking it on the surface of the wall. Next, the master measures the distance from the mounting plate to the bottom point. The first is firmly welded to the equipment case. The resulting distance must be noted on the wall. The next step is to drill two holes. Masters emphasize that you need to remember that the mounting plate does not have such holes, anchors with a hook at the end should cling to its edge.
Recommendations for work
So, everything is ready to fix the boiler on the wall. How to install it correctly? The question is by no means an idle one: the design must be fixed securely, because the fall of such a massive device can cause injuries. If the wall is made of concrete or brick, then for the work of the master recommend using a hammer drill with a drill. For a wooden wall, a conventional wood drill is used, the diameter of which is smaller than that of a plastic dowel. The latter must be installed in the hole and, if necessary, driven.
The metal anchor is screwed in until it stops turning. As a rule, a depth of 12 cm is sufficient. The boiler should be hung by hooking the hooks of the anchors to the bar for fixing on the unit body. On this, the process of suspending equipment can be considered completed. As you can see, the technology is not very complicated, so any home master can master it. At the next stage, you can connect the boiler to the water supply system, for this flexible hoses should be used.
We are connecting!
Judging by the reviews, instead of flexible hoses, pipes made of polypropylene can be used, but it will cost more and take more time. In the lower part of the boiler there are two tubes, one of which has a blue plastic ring. Cold water will be supplied through it. The second tube is marked in red and is intended for hot water outlet.
According to the craftsmen, a safety valve should be installed in the place where the cold water is supplied. It is usually supplied as a set or optional. The first step is to attach a safety valve. Do not forget to wind plumbing tape or sealing tape on the threads first.
The masters advise in the next step to screw one end of the flexible hose onto the safety valve. In this case, you must refuse to use the tape, since the hose nut has a rubber gasket that acts as a sealant. Well, the question of how to install a boiler in an apartment is practically resolved. The next step will be to screw one end of the flexible hose to the pipe from which the hot coolant flows. At the same time, a sealing tape is also not required.
Now you can do the connection of the free ends of the hoses. The end to which cold water will flow should be connected to the water pipe. At this point, a valve or tap must first be installed, which will allow, if necessary, to shut off the fluid supply. Do not neglect this recommendation, since the boiler during operation may fail or require replacement of spare parts. The free end of the other hose must be connected to the pipe that goes to the mixer.
Expert Advice
In principle, it is not difficult to install a water boiler yourself. You only need to arm yourself with certain knowledge (in addition to tools and materials). And there are many nuances in this matter. In particular, before connecting the unit, it is necessary to remove the tees on the water pipes. In the absence of certain experience, it is better to entrust this work to professionals. Now you can do the electrical part. If we are talking about Thermex brand water heaters, then they have one feature, which is the presence of a cable for connecting with the plug in the kit. Moreover, this element is connected to the boiler. If this is not so, then consumables will have to be purchased separately.
And further. To ensure that everything goes without a hitch (read - without accidents), the masters strongly recommend that you observe safety precautions when working with electricity.
What else needs to be considered when carrying out work
If you are faced with the question of how to install the boiler correctly, then you should know that the lid will not have to be opened if everything is already connected in the equipment. It is enough to install a ground outlet in advance, which should be close to the equipment. Turn on the cold water tap to check how tight and secure the connection is. If there are no leaks, the boiler plug can be plugged into an outlet. Now you know how to install a boiler yourself . If you did everything correctly, then the indicator on the case should light up. After that, you can set a certain temperature using the regulator, which is usually located at the bottom.
Conclusion
It is important to remember the main errors that are made when connecting the equipment described in the article. In particular, before installing the boiler in the bathroom, the masters recommend taking care of the availability of a hot water system with circulation. This will minimize energy loss if hot water is constantly in the pipes.