Self-leveling mixes for flooring were originally developed for large industrial premises. Today, such materials are used everywhere. They are also used by private developers, and their high popularity is explained by easy application technology and shortened curing times.
Today, these compounds are widely used for the formation of floors in children's and medical, as well as entertainment facilities, shopping and sports centers. On sale you can find bulk floors in a wide range, some of them contain cement, others are methyl acrylate, while others are polyurethane.
You can also buy epoxy mixtures, the last of which are based on organic materials. These floors are poured when it is necessary for the coating to meet strict physical, mechanical and chemical properties. Among others, there is a Horizon Yunis bulk floor for sale, which will be discussed below.
Advantages of the bulk floor
If you still do not know whether it is worth acquiring a bulk floor of the aforementioned brand, then you should understand its main advantages, among which:
- seamless surface;
- universality;
- antistatic properties;
- resistance to chemicals;
- the formation of an optimal microclimate in the room.
This list can be supplemented by operational long-term, high decorative capabilities and compatibility with underfloor heating systems. The Horizon Younis bulk floor eliminates the possibility of dirt accumulation and is not a favorable surface for the settlement of microorganisms. Caring for such a base is quite simple, because it does not leak moisture, due to this, the operational periods of the floors are extended.
You can use the floor in the room for any purpose, which indicates its versatility. It is also worth highlighting the antistatic properties, thanks to which dust does not settle on the base. Self-leveling floors can be operated when exposed to chemicals, they are resistant to ultraviolet, radiation and fire.
In the room with their help it is possible to form a microclimate ideal for a person, because the floors do not emit dust, do not spread toxins and are not able to affect the change in humidity. As for the smell, you can not worry, because it disappears already 2 hours after pouring.
Main disadvantages
The Horizon Eunice bulk floor can be chosen by you if you become familiar not only with the pluses, but also with the main disadvantages. Among the latter, a meager selection of colors and patterns should be highlighted. In addition, before starting work, it will be necessary to prepare a rough coating, level the surface and control the level of humidity.
After pouring and drying the composition, it will be quite difficult to cope with the dismantling of the layer. Sometimes consumers refuse bulk floors because of their high cost and complexity of repair. Installing such coatings is also quite expensive, which is true if compared with conventional flooring solutions.
Instructions for using the floor "Horizon Eunice"
The Horizon Yunis bulk floor is designed to prepare smooth, durable surfaces, on which the next step will be a decorative floor covering or a thin layer bulk floor. The composition is universal, because you can use it for indoor or outdoor use. The mixture is suitable for wet and dry rooms, and can also be used in conjunction with underfloor heating systems.
Surface preparation
"Eunice Horizon" universal should be applied on a previously prepared surface. When carrying out work at the stage of drying the composition, it is necessary to observe the air temperature in the range from +5 to +30 ° C, while the humidity level should not exceed 75%.
It is important to make sure that the base is dried and durable. Before application, crumbling elements, oil and bitumen stains, paint coatings and other contaminants that could interfere with the adhesion of materials are removed from the surface.
Eunice Horizon Universal should be applied to a primed surface that should not be dusty. Cracks and potholes, the depth of which is more than 10 cm, must be repaired with a Horizont screed, this must be done three days before the start of the main work. Vertical surfaces before installation around the perimeter of the room must be covered with edge tape. Its width should be chosen depending on the expected thickness of the future layer.
Solution preparation
The solution "Unis Horizon" must be pre-prepared. For this, the dry mixture is placed in a container with clean water. For 1 kg of the composition, approximately 0.14 liters of water will be needed. Then the mixture is mixed until a homogeneous mass.
This can be done in a mechanized way, using a professional mixer installed at low speeds. Manual mixing is permissible if the mass of the mixture does not exceed 1 kg. The solution is then left for 5 minutes and then re-mixed. The prepared portion must be consumed within 120 minutes.
Important to remember
Kneading the solution should be carried out according to a certain technology, it eliminates the addition of other components to the dry mixture, except water. Water can no longer be added to the finished solution, this can cause a change in the properties of the material. Only clean tools and containers are recommended for this process.
Drying time and some specifications
Hardening time is a parameter that most consumers are interested in. If the thickness of the stacked layer is 10 mm, then this period can last from 2 to 5 days. Walking on the surface with the same layer thickness will be possible after 6 hours.
The thickness of the stacked layer can vary from 10 to 50 mm. About 1 kg of dry mix will leave on 1 m 2 with the above parameters. The frost resistance of the composition is 35 cycles, while the compressive strength is 200 kg / cm².
Alignment
As soon as the solution is ready, it can begin to spread on the surface, evenly distributing on the basis of the rule. It is possible to lay ceramic tiles after completion of work only after the surface has dried. If the floor has differences of more than 50 mm, then the floor leveler should be applied in several layers. Before you start laying the next layer, you must wait until the previous one has completely dried, which will take 28 days. Before this, the surface is treated with soil and dust free.
Installation instructions for flooring "Horizon 2"
"Horizon 2" is a composition which is intended for thin-layer leveling of surfaces with the subsequent laying of parquet, linoleum, laminate and ceramic tiles. If the differences on the floor do not exceed 5 mm, then the installation of beacons is not required. The prepared portion must be poured, and then rolled with a needle roller. The next portion of the solution must be poured no later than 20 minutes from the moment the mixture is closed. Each new portion needs to be poured, moving away from the previous one, so that the mixture can spontaneously flow.
“Horizon 2” may be flooded with some interruptions. This is true if the area is more than 100 m 2 . At the same time, 2 cm seams are left between the filled areas, which are filled with a spatula 6 hours after applying the last portion of the solution.
The composition of the floor "Horizon"
The composition of the bulk floor is of interest to some specialists. If you are one of them, you should know that among the ingredients contain:
- quick hardening cement ;
- polymer additives;
- crushed limestone.
If we compare the cement from the Horizon mixture, it will not differ in chemical composition from Portland cement, but during its manufacture the clinker is crushed more strongly, so the particle size is 2 times smaller. This allows the cement to gain strength up to 60% in just 5 hours. However, after this the process slows down and proceeds as usual. That is why it can be considered that the composition of the bulk floor determines some characteristics of the described mixture.
Floor cost
Usually, when calculating the price of a material, the cost of the composition for filling and sealing cracks, as well as mixtures for washing technological containers and tools, are not taken into account. The cost of the bulk floor per square meter is 400 rubles. It does not indicate the price for the primer, which must be applied before starting work.
Conclusion
The cost of a bulk floor per square meter is one of the most important factors that affects the final choice of a consumer. If you have already purchased a floor leveling compound, you should remember that it should be used after installing beacons. They are located at a distance of 2 m from each other over the entire width of the surface.
To do this, in the proposed installation site of the beacons, it is necessary to apply the Horizon solution, into which the elements are pressed. As them can be a metal corner or tube. Correct installation must be checked using the building level. Further work should be carried out 5 hours after the installation of beacons.