Those who have a summer cottage are likely to dream or have already acquired a bathhouse. This structure refers to fire hazard. It has an oven, which allows you to heat the bath to the desired temperature and steam. Sometimes people who were engaged in construction on their own, poorly thought out the issue of safety and protection of the building. Today, there are many materials that will protect a wooden house from fire. One of them is minerite plate. For a bathhouse it is better not to find material. Consider its features and specifications.
About protection
Fire safety of the bath is the main condition for operation. First of all, by erecting such a structure, you should consider how you can prevent all accidents associated with damage to property and a threat to people's health. If the bath is equipped with a wood stove, the following structural elements must be secured:
- walls and ceiling;
- bake;
- chimney.
For the bathhouse in which such a furnace stands, you need to choose materials for insulation, not just high-quality, but environmentally friendly. Gone are the days when asbestos was used everywhere, which became the main cause of cancer. This happened due to the vapors released during constant heating.
Board of professionals! Do not use not only asbestos for insulation, but also all materials that include resins.
Only natural materials are recommended for use, for example:
- natural stone;
- fiberglass;
- stone fiber;
- stainless metal.
Today we are interested in the mineralite plate. For a bath, the expediency of its use is confirmed by qualitative characteristics.
Composition
Minerite is known to many as a fiber cement panel, which has been used to this day as a finish on ventilated building facades. The plate differs from many similar materials in increased impact resistance. Such a panel practically does not deform and withstands high physical loads. Minerite plates for the bath are produced using energy-saving and environmentally friendly technologies. The following ingredients are part of the protective panels:
- cement;
- cellulose;
- limestone;
- sand;
- mica.
As you can see, the composition does not use asbestos. All other components are absolutely harmless when heated.
Advice! Composition may vary slightly depending on the manufacturer selected. All the difference is in special mineral and synthetic additives.
Specifications
Now you should study the panel in more detail and find out how it is superior to other insulation materials. First of all, we will pay attention to technical qualities:
- The weight of one plate does not exceed 26 kg. This makes its installation easier.
- The size of the plates will fit in any bathhouse. The length is from 1200 to 3600 mm, the width is from 450 to 1500 mm, the thickness is not more than 6 mm.
- Eco-friendly composition.
- Mineritic plate differs from many other materials in its ability to self-clean.
Knowing all the technical characteristics, we can safely say that there is no better material than mineralite slabs for a bath. Reviews show that the panels are in demand. And why do people choose them?
Advantages
- Having made isolation with mineralite, you will forget about replacing them for a long time. They serve well and are in good condition.
- Panels do not burn or ignite. Such a fiber cement board meets the most stringent fire safety requirements.
- Minerite is considered a universal material. It can be used not only for insulation, but also for decorative decoration.
- Installation of plates is extremely simple. You can do everything yourself without resorting to outside help.
Mineritic plate for a bath, like any other material, except for the indisputable advantages, has disadvantages. And most buyers note only one thing - the unpresentable appearance of some types of such panels. If you choose more decorative pieces, then they will cost a little more.
Mounting
Need to quickly and accurately make thermal insulation? We choose mineralite slabs for the bath. Installation is carried out as follows:
- On the wall of the bath near the furnace, special brackets must be installed. Their length should not be more than the thickness of mineralite.
- We lay the insulation, which is mounted on special dowel umbrellas.
- We make the installation of the frame from the metal profile horizontally and vertically from above.
- We install minerite plates on it. If the thickness of the insulation panels does not exceed 15 mm, then use ordinary self-tapping screws for fixing. In other cases, clip clips are used.
- All joints must be sealed. It must be the same brand as the panel.
- If you have a corner, cover it with a metal profile.
Board of professionals! If you fix mineralite plates for a bath using self-tapping screws, be sure to use a sealing tape. It is laid between the panel and the frame.
As you can see, the installation of mineralite is simple and easy.
Cost
We have found out that the most reliable and fireproof materials are minerite plates for a bath. Their price starts at 890 rubles per square meter. The cost may vary depending on the manufacturer and additional polymer additives that are part of the panels.
Now you know for sure that a minerite slab will help protect the building from burning. For a bath it is the best and most reliable insulating material. You just have to buy and install it, and the minerite plate will take care of your safety.