Miter saws are able to quite quickly deal with sawing wood. With aluminum profiles, they can also work successfully. The feature of this power tool is an interesting design that allows you to change the position of the disk. As a result, the cut angle can be adjusted. In this case, the parameters of the tilt of the disk for models can vary greatly. The power of this tool is controlled by a regulator. To remove dust during operation, the device has a bag.
In addition, various functions should be noted, and one of them is a soft start. As a result, comfort from work can significantly increase. Today, manufacturers can offer many options for saws. According to their characteristics, they should be divided into budget, secondary and professional models. The characteristics of the power tool, as well as its price, will depend on the choice of the buyer.
What parameters does the saw have?
Among the important parameters can be noted the power consumption of the device. This indicator is measured in kW. The voltage for many models is standard and is 220 V. However, the operating frequency can vary greatly. The power parameter of the miter saw affects the number of revolutions that the blade makes. The manufacturer also indicates its dimensions, on which the diameter of the saw blade depends. The bevel angles are measured in degrees. Additionally, the manufacturer indicates the dimensions as well as the weight of the tool. This indicator affects the comfortable use of the saw.
Saws from the company "Bosch"
The Bosch company in the market has always been distinguished by its quality. Most models are comfortable and practical. At the same time, the handles are rubberized and hold well in the hand. Miter saws for Bosch wood have a dust extraction system. This process occurs with the help of a special pipe, where air is sucked into the bag. Thanks to the built-in supports, the stability of the tool is at its best. In turn, the legs at the base are rubberized. The accuracy of the work is possible to control on a special scale. To adjust the angle of inclination on the side of the power tool there is a convenient regulator. The soft start system in all models is provided by the manufacturer. As a result, the shortcomings of the saws of the Bosch company are quite difficult to find.
Comparison of models: "Bison"
Miter saws for wood "Bison" are able to boast of compact dimensions. The average weight of a power tool is around 14 kg. In a minute, the disc is capable of over 4,000 revolutions. At the same time, the frequency is stable. The average power of miter saws fluctuates around 2 kW, and the maximum voltage is 230 V. The diameter of the saw blade of the device depends on the modification. Most manufacturers indicate dimensions 254 by 30 mm. The maximum angle of the disc is 47 degrees. A professional saw model will cost 30 thousand rubles.
Saws of the Metabo company
Miter saws on the Metabo tree are significantly inferior in performance to the Bosch models. This is especially true for structural strength. Thus, stability during operation of the power tool is not enough. There are also some adjustment problems. The maximum tilt angle of the disc is only 45 degrees. The fixation system, in turn, looks unreliable.
Of the advantages, powerful motors that are installed with a safety switch can be noted. As a result, the saw blade stops pretty quickly. Models of the specified trademark can be connected to the vacuum cleaner. At idle, the disc is capable of approximately 3800 rpm. The voltage of the device is standard and is 220 V. The frequency of many models is at around 45 Hz. The depth of cut at a small angle is a maximum of 90 mm. On average, the model of the above company will cost 15 thousand rubles.
What are Corvette devices good for?
Many Corvette miter saws boast simple controls. The power of the power tool can be changed using the knob on the side panel. To turn off the device there is a special trigger. Starting the saw blade is pretty smooth. Due to this, comfort from work is provided good.
Among the shortcomings, poor stability can be noted. The working frequency of the miter saw is on average 45 Hz. The devices can operate from a 220 V network. Most of the models of the above company are suitable for domestic use, and there are few professional models on the market.
New models of the Interskol brand
Due to the high power , the Interskol miter saws on wood are capable of gaining good speed. The average frequency of devices fluctuates around 50 Hz. The mains voltage of many models is 220 V. Collector electric motors in saws. Among the features, one can additionally distinguish reliable protection systems. The maximum tilt angle of the saw blades is 50 degrees. They are regulated quite smoothly, and this is good.
Excellent stability of the device is provided by rubber racks. The lower frames are made of steel and can withstand significant loads. This company produces professional models with great success, and there is a table miter saw on wood an average of 16 thousand rubles in the market.
Saws "Stark" and their characteristics
Saws "Stark" have large discs in their kit. Due to this, their speed is good. In general, the handles of the models are comfortable. At the same time, the structures during operation are quite stable. In the kit for the device, the manufacturer applies a key, as well as a brush for cleaning the miter saw. There is two-way adjustment of the disc position. The protection system in all models is installed in the IP26 class. Directly braking the disk is pretty fast. The maximum angle of inclination is 45 degrees. These tools are capable of working with workpieces of any length.
Overview of Devolt Models
According to the characteristics, the Devolt saws are most similar to the Bosch models. The electric motors on them are also installed good, and the power has about 1.6 kW. The limiting frequency is at the level of 50 Hz. In general, the disk spins quite smoothly, and as a result, the cut can be done very accurately. The emphasis in many models is double-sided. In turn, the strobitsa are installed with a latch, and you can always fix the workpiece.
The bag for collecting chips in the saws is mounted on the side. Thus, it does not interfere with the operation of the device. Included with the saw is a metal case. Due to the light weight of the tool, it is quite easy to transport it. Directly disks are carbide. Additionally, it should be noted that they are produced with soldering. As a result, the pendulum miter saw on the Devolt tree can last a long time, and on average the model costs about 16 thousand rubles.
Saws from the manufacturer "Hyundai"
Miter saws for wood of this company are most suitable for complex tasks. A feature of many models is convenient regulation. The angles of the disc can be set different. Many models have a dust extraction system. Due to the powerful electric motor, the frequency of revolutions per minute is more than 4200.
Saw electricity consumption is acceptable, and weaknesses include weak frames. Thus, the stability of the tool due to the small legs is not very good. The average saw blade diameter is 254 mm. As a result, we can say that the saws of this company are inferior to the leaders in this field, but are not in last place. On average, an unprofessional model will cost 20 thousand rubles.
What is Makita ready to offer?
Miter saws for wood of this company are most suitable for professionals. The maximum frequency for them is on average about 55 Hz. The rated power of the electric motor fluctuates around 2 kW. The protection system is installed in the IP 26 class. Thus, short circuits occur quite rarely. Another advantage of the saws of this brand can be called high-quality handles with frames. They are fully rubberized and stand out with good stability.
As a result, working on a power tool is quite comfortable. The saw blade is gaining momentum very smoothly. Compared to Bosch models, tilt angles are better at a maximum of 70 degrees. In terms of dimensions, the models of this company are at an average level, and usually they weigh about 10 kg. Of the shortcomings, only high prices can be noted. A professional model will cost the buyer in the market 30 thousand rubles.
Characteristics of Vital's Models
According to the parameters, miter saws for wood of this company are similar to the Metabo models. Electric motors in the devices are of the collector type. Protection systems are installed by manufacturers quite high-quality, but problems with short circuits do happen. In a minute, the saw blade can make up to 3800 revolutions.
The maximum frequency of the power tool is at around 45 Hz. The voltage rating of the mains is on average 230 V. Saw blades are available only with dimensions of 305 by 32 mm, and the maximum bevel angle is 50 degrees. In this case, the slopes can be adjusted during operation. Rotation transmission in all models is belt type. Of the shortcomings, the large dimensions of the devices should be noted. The average mass of a power tool assembled is 23 kg.
Saws of the Feyida trademark
By the power of electric motors, combined miter saws on the wood of this company lose to many. On average, the frequency is maintained at around 50 Hz. For a maximum of one minute, the saw blade can make up to 4000 revolutions. In terms of dimensions, the devices of this company are not allocated. The design is generally quite pleasant. The handles in the kit are rubberized and hold perfectly during operation.
Horizontal clamps are included with the device. Additionally, the manufacturer applies stops that help in the installation of the workpiece. Of the shortcomings, the complicated maintenance of the devices should be noted. At the same time, their dust collectors do not work properly. We can also mention the weak cooling system of the electric motor. As a result, the saw cannot be operated for a long time without interruptions. As with Vital's saws, the transmission of belt rotation is of a belt type. An average model costs about 14 thousand rubles.
Summarizing
According to the characteristics, the milling saws for wood of the Bosch company, as well as the Makita, look most preferable. If you choose among middle-class models, you can distinguish devices of the Stark firms, as well as Hyundai. In general, they are universal and prices are reasonable. The most convenient are Interskol saws, and for beginners they are perfect. They are also easy to maintain and famous for their good performance.