The foundation acts as the base part of the building structure. It takes on static loads, providing stability and durability. If we are talking about a shallow base, then for such structures thermal insulation technology using Penoplex Foundation sheets has been used for several decades. Using this material, it is possible to reduce the freezing of heaving soil, as a result of which the deformation of the underground part of the building is excluded.
Description
The material described above is an extruded polystyrene foam having excellent strength and insulation properties. It is used to warm the foundation, providing protection for both the support of the house itself and the basement. Among the features, one can distinguish excellent moisture resistance, which eliminates the need for additional waterproofing. That is why, even under adverse conditions, good thermal insulation is provided.
Penoplex Foundation has a low coefficient of thermal conductivity, which guarantees excellent thermal insulation properties. Thanks to this, the material is able to cope with freezing of the soil and eliminates the occurrence of cold bridges. This heater reliably protects the waterproofing from external mechanical influences. It should be noted that Penoplex Foundation is biologically stable and is able to extend the life of all underground structures, including basements.
Features of use
Extruded polystyrene foam is used for various types of foundations during construction and at further stages of the formation and operation of the building. The base plate is insulated after waterproofing, which is considered the traditional method and is true for all other cases.
Penoplex Foundation is fixed with mounting glue, as mechanical fixation can cause waterproofing. It is mounted vertically, providing an overlap, starting from the bottom row. After the entire perimeter of the building is closed, the work can be considered completed. The extruded polystyrene "Penoplex Foundation" should protrude 500 millimeters above the level of the sprinkled soil, which will protect the walls of the first floor from the effects of water.
Positive characteristics
Heater for the foundation "Penoplex Foundation" has many advantages. Among them, insignificant moisture and vapor permeability can be distinguished, this indicator ranges from 0.1-0.5% of the volume of insulation. Specialists note impressive compressive strength. Consumers can count on resistance to decay, decomposition and exposure to chemicals. Choosing a heater, in recent years an increasing number of buyers are paying attention to the environmental friendliness of the material.
EP "Penoplex Foundation" (1200x600x50 mm G4) is completely harmless, since toxic substances are not used in its production. Even an inexperienced master in the process of work can easily cope with insulation, as the material is easy to install, easy to process and cut. It can be quite simply mounted on dowels.
During operation, Penoplex will manifest itself as a material that resists temperature extremes. Tests showed its stability at fluctuations from -80 to +100 degrees. Manufacturers guarantee a life of 50 years. For each consumer, this material is available, as it is relatively inexpensive.
Specialist recommendation
The material can be used comprehensively, inside or out. However, the most effective solution is the latter technique. For its implementation along the perimeter of the foundation, it is necessary to prepare a trench, the depth of which should be below the sand cushion and the freezing point. In this case, it is important to lay a margin of 5 cm. At the next stage, it is necessary to fill up the sand, forming a continuation of the pillow, after everything is carefully compacted. Plates should be laid in the full width of the trench, and the edges glued with bitumen mastic.