The Husqvarna 240 chainsaw, the technical characteristics of which you can see below, is the equipment that follows the Husqvarna 236 line. If a comparison is made between these two options, it should be noted that the latter is characterized by higher power, a slightly longer tire and has an engine that can save fuel up to 25%.
The Husqvarna 240 chainsaw, the repair of which is not required so often, is an environmentally friendly tool, which is very important for some consumers. The amount of harmful emissions into the atmosphere is reduced, and the number of cuts at one fueling is increased. Quite often, the products of the aforementioned Swedish company are compared with chainsaws made by Stihl. As an advantage of the former, the presence of a primer should be highlighted to simplify startup. However, as practice shows, this does not greatly affect the equipment startup process.
What is important to remember for the consumer
The Husqvarna 240 chainsaw, the technical characteristics of which should help you make the right choice, requires a file to be finished after purchase. In this case, we are talking about adjusting the carburetor. It is important to remember that there is no oil control system for chain lubrication in this equipment, but quite often it happens that the oil tank is emptied faster than the tank intended for the fuel mixture.
Technical characteristics of the Huskvarna 240 16-3 / 8 9665112-26 chainsaw
This model costs 13,000 rubles. and has an air purification system that reduces filter wear. The engine in the device is quite reliable and powerful, it contributes to economical fuel consumption, reducing the amount of harmful emissions. The chainsaw must be warmed up at startup. As soon as the cold tool starts up, let it run for 30 seconds. Then you can engage and release the throttle lever. This will prepare the tool for work.
The Huskvarna 240 chainsaw described in this section, the technical characteristics of which should be of interest to you, has a 40 cm tire and a power of 2 liters. from. The engine capacity is 38.2 cm 3 and it holds 0.3 l in the fuel tank. It will be possible to add oil to the tank in a volume of 0.2 liters. Before purchasing this equipment, please note that it belongs to the household class and weighs 4.7 kg. The number of links in the equipment is 56, the groove width is 1.3 mm, but the noise level is 100.7 dB.
Model reviews
To solve everyday problems, you can purchase a Huskvarna 240 chainsaw, reviews of which you must first read. From them you can learn that the engine is stable, this quality is ensured by the ability to control the throttle. Consumers in their reviews emphasize that the controls are comfortable, the handle has a D-shape and is covered with rubber inserts for greater comfort.
The advantages can be considered:
- brake lever;
- economical fuel consumption;
- the presence of an anti-vibration system.
But consumers do not consider this list complete. They like the presence of a brake lever in the model and are also attracted by the ergonomic design, low exhaust volume, and the presence of a chain tensioner.
User's manual
The manufacturer emphasizes that the saw should not be used until the chain has been treated with enough oil. Before starting work, you must familiarize yourself with the instructions also because from it you can learn about safety measures during work.
For example, if the chain and the saw bar are incorrectly combined, this will increase the likelihood of kickback. But even if you familiarize yourself with the manual, it is impossible to predict possible situations when working with a saw, so the operator should be careful, guided by common sense. It is necessary to use protective headphones, a special helmet, goggles and protective clothing when working.
Carb adjustment
The Husqvarna 240 chainsaw, the carburetor adjustment of which can be done by you yourself, is a tool that should not be repaired at home. However, you can do the configuration of the mentioned node yourself, for this you need to learn how to distinguish the screws. Each of them has a letter designation, the first is used to adjust low revs, the other to adjust the upper revolutions, while the third is used to adjust idle speed.
Despite the fact that the factory adjustment is considered optimal, with the help of screws you can adjust the engine. Sometimes this is required when the climatic conditions differ from those recommended by the manufacturer. To increase the speed, the first two of the mentioned screws must be turned clockwise. The sequence of use of the screws corresponds to the one indicated above. If you have some doubts, it is better to consult a specialist, because if the carburetor of the Husqvarna 240 chainsaw is not set correctly, the engine may fail.
Chainsaw Repair: Ignition System Check
Even the highest quality equipment sometimes requires repair. The Husqvarna 240 chainsaw, the technical specifications of which were mentioned above, is no exception. If a breakdown occurs, first you need to inspect the spark plug, but before that, the wire is disconnected, and the candle is turned out with a special key. If it is dry, the fuel mixture does not enter the cylinder. The malfunction in this case does not apply to the ignition system.
If the candle is sprayed with fuel, then the reason is an excess of the mixture or a violation of the start rules. Sometimes an incorrect carburetor adjustment leads to a splattered spark plug. The Husqvarna 240 chainsaw, reviews of which are often the most positive, can be repaired in this case by wiping the candles and cutting off the fuel supply. To remove excess, it is necessary to turn on the starter and check the combustion chamber. At the final stage, the candle is put in place, and the mechanism can be started again.