Since childhood, every child is taught to tie shoelaces on their own. Most often, this is the standard old-fashioned way - crosswise. Not everyone knows how many different variations of tying exist. The use of bright and original lacing allows you to embellish even the most unremarkable shoes. In the article, we will talk about how to tie laces on boots beautifully.
Traditional lacing
The most popular type of lacing is crosswise. Its advantage is simplicity and speed of tying. Despite many other ways, this one will surely occupy the leading positions of more than one generation. It is with the traditional method that children are taught to lace up their shoes. It is functional and fits any shoe.
How to tie your shoe laces nicely? In this case, you need to perform the following actions:
- Each end of the product is passed from the inside to the right and left holes. Both ends of the lace are combined so that they are the same length.
- Then take one end of the lace and pass into the nearest hole located diagonally.
- Do the same with the opposite side. The result should be a cross.
- Manipulation is continued to the upper holes.
Diagonal
The diagonal way of lacing will help to beautifully tie the laces on women's shoes. It is a bit like a traditional one, but unlike it, this method consists of the same figure in which one part goes along the inside and the other along the outside. This method is both fresh and versatile. The diagonal lacing can be similar on both shoes or mirror each other.
Technique of execution:
- One end of the lace passes through the hole from the outside, and the other from the inside. Both ends are connected so that they are the same length. The end of the lace that is threaded from the inside will be visible on the boot.
- It is threaded into the nearest hole diagonally, always from the outside, otherwise the pattern will not work.
- The other end is passed through the nearest opposite hole, but this time from the inside. At this stage, the part that was hidden will be on top of the boot.
- Manipulation is continued to the upper holes.
Cross over
With the help of this figure, you can beautifully tie the laces on women's shoes. This type of knotting looks best with classic shoes (oxfords, brogues) with 5 or 6 holes on each side. The method is as similar as possible to the traditional method. It also involves alternating the inner and outer cross, with the lower bar running along the top of the boot.
Technique of execution:
- The lace is threaded from the outside so that each end goes inside the boot. Both sides are joined so that they are the same length.
- Then they are crossed and passed through opposite holes so that a secret cross is formed.
- Further, the steps are repeated, but this time the figure will be visible and will be located on top of the boot.
- Manipulation is continued to the upper holes.
Straight lacing
Direct lacing makes it possible to make horizontal lines on the shoes, which are especially effectively combined with classic types of shoes. This option looks both easy and elegant. Straight lacing is especially suitable for shoes with many holes on each side. The only drawback of this method is that the ties are tightened quite problematically, especially if the shoes fit tightly on the foot.
Consider how to tie your shoelaces in this way. Step-by-step actions should be performed as follows:
- Both laces are threaded inward so that they are the same length.
- The left end is pulled from the inside to the nearest hole. The right one is threaded from the inside into the hole located through one division above it.
- Then they return to the left end and pass it along the top of the boot into a horizontal hole parallel to it. Do the same with the right.
- After that, the left lace will rise through one hole, and the right lace will be threaded into the next.
- Manipulation is continued to the upper holes.
Military lacing
This method will help to tie the laces on men's shoes beautifully. This type of lacing is often called the reverse (due to the technique). It is ideal for people who value minimalism and comfort. In many countries of Europe, young people serving in the army lace up their shoes in this way.
Technique of execution:
- The lace is pulled from the outside with the ends inward. They are connected in such a way that they are the same length.
- Both sides cross and pass from the inside out to the next holes. As a result, a hidden cross should be formed.
- Then take the left lace and thread into the next hole on the same side of the row. Get a vertical strip on the top of the boot. Do the same with the right end.
- After that, both sides are again threaded inward, forming a secret cross.
- Manipulation is continued to the upper holes.
Lattice
Talking about how to tie shoelaces beautifully, one cannot fail to mention this effective method. The technique of its implementation is quite complicated. If you have patience and lace up your shoes in this way, you will get a very unusual and attractive pattern. Most suited to shoes with six holes on each side.
Technique of execution:
- The laces are threaded from the inside of the boot to the outside with both ends, which are then joined so that they are the same length.
- Then they are crossed and passed from the outside of the boot, stepping over one row of holes.
- Then they take one string and thread it from the inside into the hole that was missed, and pull it out.
- Do the same with the other end. Then both are again allowed inside.
- The left part of the lace is threaded into the next hole in the same row from the inside to the outside.
- Manipulation is continued to the upper holes.
Lightning
Consider another way to tie your shoelaces nicely. A photo of this option is presented below. Despite some difficulty in performing the “zipper”, this type of lacing tightly fixes the leg. Often this method is used by lovers of roller-skating and ice-skating.
You need to perform the following actions:
- Both ends of the shoelaces extend outward from the inside of the shoe so that they are the same length.
- On each side, the lace is wrapped and stretched under the existing horizontal line. The right lace is diagonally into the left hole and is passed from the inside. Do the same with the left.
- Then each part is again thrown to the opposite side (for example, left to right) and passed under the cross. The ends are crossed and threaded from the inside out.
- Manipulation continue to the upper holes.
Roman
Another way to tie your shoe laces nicely. This method got its name due to the fact that the finished drawing resembles the alternation of Roman numerals X, I.
Technique of execution:
- The lace is threaded from the inside of one row of the boot vertically.
- Cross and pass through holes located in parallel from the outside to the inside.
- The lower end is threaded through one hole in the same row, and then passed through the top through a fastener located opposite. The result should be a flat strip.
- The other side is also passed from the inside through one hole in the same row and pulled out. The ends of the shoelaces should be opposite each other, they are again crossed and pulled inward.
- Manipulation is continued to the upper holes.
Spider web
This is another not very difficult way to tie your shoe laces nicely. Ideal for athletic shoes with a wide tongue. Can be done using short or long ties. The easiest way to lace up sneakers is to use one end first and then the other.
Technique for long ties:
- The lace is drawn from the inside of the bottom row of holes.
- The ends are crossed and threaded into the fourth pair of holes, skipping two rows.
- Each side goes down exactly from the inside of the shoe and extends out through the second row of holes. Then again the ends are crossed and, passing two rows, they are threaded into the boot.
- Manipulation is continued to the upper holes.
Technique for short ties:
- The lace is pulled from the inside of the bottom row of holes.
- The ends cross and pass through the fourth row of holes inward.
- From the inside, each side is threaded, stepping over two cells, and brought out. Then again crossed and lowered, skipping four rows of holes.
- From the inside, both ends (each on its own side) are lifted and led out through the next row. They cross again and, having missed two rows of cells, lead inside.
- Manipulation is continued to the upper holes.
Butterfly
This is a very suitable way to tie laces on high boots beautifully. This lacing does not hold the foot very tightly, allowing it to bend while moving. This method is suitable for everyday shoes in urban areas.
Technique of execution:
- The lace is threaded into the boot from the outside with the ends inward through the bottom row of holes.
- Each end from the wrong side of the shoe rises one division up and pokes into the cell.
- Then the sides are crossed and threaded into the next row of holes.
- Again, each end on the inside of the boot is lifted one row up. Then pulled out and crossed.
- This lacing method is suitable for shoes with six rows of holes.
Checkers
This method will show how beautifully tie long shoelaces on boots. Recommended for athletic shoes that are worn without fastening. To do it, you need two laces for each shoe, it is better if they are in contrasting colors, so that the effect of a checkerboard is more noticeable.
Technique of execution:
- The ends of the first lace are pulled inward, through the holes located along the bottom row of shoes. In this case, the right side should be longer.
- From the inside, the right end of the lace is lifted one division and threaded through it outward, and then on top, into the located hole on the opposite side, inward.
- Then, together with the second part of the lace, they are led out through a common hole and continue to be tied in this way to the upper holes.
- The second cord is attached at one end from the inside to the first, and the other begins to perform wave-like movements in the opposite direction. First, let on top of the first row, then under the second, on top of the third, under the fourth and so on. When the second string reaches the top, the same thing is done in the opposite direction. As a result, it should go two times up and two times down.
- The end of the lace is also fixed on the inside of the shoe.
Tie a knot and a bow
When the shoes are laced, proceed to the next step - tying a knot. It will also be useful to know how to tie a bow on laces beautifully:
- Throw one end of the tie over the other and tighten to the desired density of the girth of the foot.
- Then the tips are taken in the palm of your hand so that they look in different directions. Using the ring finger and middle finger, the laces are clamped so that two loops are obtained.
- One loop is superimposed on the other, then the upper one is wound behind the lower one, lowered and threaded through the hole formed at their base.
- The right loop is taken with the right hand, and the left, respectively, with the left. Pull each ring in its direction, tightening the bow knot.
We presented only a small part of the possible variations on how to tie the laces beautifully. It is enough to train a couple of times to remember one of these methods. In addition, this way you can lace up not only shoes, but also some items of clothing.