If you decide to make major repairs in a house or apartment, the question often arises of replacing old window structures. Yes, wooden windows are structures made of environmentally friendly material, but the paint will always need to be updated, because it peels off, and annual repairs will cost you a pretty penny, and even this is unnecessary trouble. To date, many apartment owners have already replaced their old windows with new ones, but there are those who are just going to do this.
Why are plastic windows in demand?
These are constructions that do not require special care. Their service life is forty years or more. Before installing new window systems, it is worthwhile to learn more about how to properly install the ebbs on plastic windows with your own hands. This is very important, especially if you want to do everything yourself.
The necessary tools
Before you begin installing ebbs on plastic windows and installing the windows themselves, you will need to stock up on the right tools. Here is a rough list of what you will need in your work:
- grinder, level;
- perforator, ebb;
- stubs, tape measure;
- sealant, mounting foam;
- stationery knife, building corner.
When you have stocked up with the necessary tools, then you can proceed to the installation of ebbs on plastic windows.
What material to choose ebbs from?
In fact, you can use absolutely any castings, it doesn’t matter, they are galvanized, aluminum or plastic. Products will serve you for a long time faithfully, if you correctly install the ebbs on plastic windows and take care of them. Each of these materials has its own special characteristics. Therefore, to perform the installation of ebbs on plastic windows, you will need to have a little knowledge and skills.
More about low tide
You picked up and completed the installation of newfangled windows, but this does not mean that the work is completed. No one canceled the installation of ebbs on plastic windows, peaks, slopes. If you do not know what it is and why it is needed, then it is time to resolve this issue. In everyday life, many people call low tides window sills, but this is a little illogical. Why is it necessary to mount the ebb on a plastic window of a balcony? If this is not done, then the water from the outside of the window unit will be delayed in the gaps, and the operation of the frame will not last long. Window systems are a costly pleasure, and few come to change windows because of the banal savings on low tide. In addition, if you have a plastic window, then, having installed the ebb on a plastic window with a swivel pipe, you will give it a complete look, and it will fit into the overall architectural solution.
Want to protect your window from precipitation? Then one ebb will not be enough! You will need to worry about installing a visor at the top of the window.
What can be said about the visor?
Now there is a large selection of materials for creating visors and ebbs. This is PVC and galvanized sheet with plastisol or polyester coating. To determine what materials you need, it is better to install a plastic window unit, and then buy the necessary components to compare with the color and material of the window itself. It is important to make sure that the window structure harmoniously fits into the architectural ensemble of the building, and then already do the installation of ebbs on plastic windows with your own hands.
Ebb finishing techniques
It is important to correctly install the ebbs on plastic windows with your own hands throughout the window opening. If you had a wooden window, but you changed it to a plastic one, then you most likely noticed that the wooden structures are thicker, so you need to carry out finishing work of the ebbs so that the appearance of the house is pleasing to the eye.
There are several techniques for finishing the ebb:
- Stucco finish. This is the most common and budget option that has been applied a long time ago. This type of finish is suitable if you have a house made of bricks, panels or concrete blocks.
- The most reliable and accurate type of finish is the installation of the tide. It does not matter, you need to install the ebb on a plastic window in a wooden house or any other, the method is extremely simple and effective. Most importantly, the installation does not take much time. Plastic constructions add insulation to the window block, are not exposed to external influences, just wash.
Therefore, it will be very simple to independently perform the installation of the ebb on a plastic window in accordance with GOST. Put a little effort, patience and stock up on the right tools.
Windowsill and low tide
If you don’t know how to proceed correctly, you can see how the ebb is mounted on a plastic window in a wooden house in the photo, read the information, and then follow the instructions step by step so as not to be mistaken. In most cases, together with a plastic window unit, a new window sill and low tide are installed at the same time. It should be said that even if there is a high-quality old tide, it will be necessary to restore it, but at a cost it will not be inferior to installing a new one, as you can see, there is no point in saving, therefore it is easiest to purchase a new product right away.
A window sill cut under your window opening will need to be attached to the stand profile. If there is a small opening under the window sill, it will be necessary to foam it, if the opening is large, you need masonry or its sealing with a special solution. Once you decide on the size of the window sill, feel free to add a couple of centimeters to the desired width, as the window sill goes under the frame by about two centimeters. If the window opens onto the balcony, then you can not install the tide, mount the cornice right away.
We install window systems
When installing the window, then the wooden wedges will need to be located next to the dowels, or in a different way with the fastening points of the PVC window in the wall opening. So you can fix the entire structure and protect it from bending while pulling it to the wall. All bars without any knots should be placed with fibers perpendicular to the window block itself. With the correct measurement of the opening for the window unit, the height of the choppers will be at least twenty millimeters. Such values are required for arranging the lower heat-insulating seam and mounting the ebb on a plastic window in a wooden house.
Then we fix the PVC window to the wall on anchor dowels or construction screws. If you choose fasteners and their sizes, then you can be guided by GOST 30971-2002. Now we hang the opening flaps and adjust them in height and fit. The tightness depends on the season of the year and your preferences.
We fasten the double-glazed windows thanks to the glazing beads, after completing the installation of the lining for the double-glazed windows. The rafters will need to be hammered with a wooden hammer, do this very carefully so as not to damage the glass.
To equip the heat and sound insulation layer, you will need to use foam insulation. Fill the gaps with insulation should be after the assembly of the window block, after fixing it. When filling gaps, pay attention to completeness and degree of filling so that nothing is distorted under pressure.
Before filling, carry out trial testing for the initial expansion of the foam product and when working be careful, try to prevent the release of excess foam. On the inside, you can cut off the foamy surplus.
In more detail about installation of ebbs on plastic windows in the house from a bar
Window tides perform a protective, decorative function. In order for them to perform their task efficiently, it will be necessary to install them in a timely manner. This is best done on the day when the window block is installed or the loggia or balcony is glazed. If you install the ebb on a plastic window in a frame house at another time, this may bring you additional expenses and you will have to wait a while with the installation.
The installation process is simple, but requires a person to follow certain rules and techniques. The ends of the ebbs need to be inserted into the wall, and the edges must be bent in a shape resembling the letter “C”. The tide is set on a special "pillow" from the solution. In certain situations, all joints and points of touch of the ebb and wall are smeared with mastic. It is a good material that enhances waterproofing and strengthens the bond.
Attention! Installation work is best done on a good day, because all work is carried out in the open. If you do not understand how to install the ebbs at all, then entrust this work to specialists, since when installing them yourself there is little risk of choosing the wrong angle, but you can correct a small error.
During installation work of the ebbs, special attention should be paid to waterproofing material. If you choose it incorrectly, then the tide will have poor tightness (this will lead to problems in the future).
When the tide needs to be attached to the PVC profile, then you should use a special groove for this purpose, which all manufacturers leave for installation work. If the installation of ebbs occurs below the level of the frame of the plastic windows, it will be necessary to additionally use stand profiles to increase waterproofing.
The joints of the ebb and the window frame must be completely tight, otherwise the ebb will not be able to fully perform its functions, which means that the facade and window unit will not be protected from water penetration.
Mounting Features
In order to guarantee the removal of liquid from window blocks from the outside, it will be necessary to install window tides. As a result, you will prevent rain from entering the frame space.
Features for the installation of ebbs:
- Low tides can be made from different materials. The most commonly used galvanized steel. However, you can not engage in self-production of ebbs, but just go and buy ready-made and install them. It is best to install the ebbs immediately after the installation of window blocks to preserve the life of the structure. During installation, it is best not to block the drainage pipes that are located on the outside of the frame. It is better to install the tide under the window, and not right next to it.
- When mounting sills on plastic windows on siding or any other material, be sure to take care of sealing all joints with the window frame. To do this, you can use polyurethane or compression tapes, silicone sealant. If the installation of balcony ebbs takes place, then everything is not as simple as it seems. If the tide turns out wider or longer than the size of the balcony, then the water will necessarily fall on the glazing.
How is the installation?
Before installing the tides, you will need to verify the quality of the material, evaluate its color. Do not forget that during installation a large role is played by the angle of the tide, it should be from one hundred and ten degrees. If it is less, then the water will stagnate, still look at the ebb plane. On the plane there should not be any deflections, propeller effects. The installation of the tide should begin with an assessment of the difference in the plane of the base. It should not have impressive ledges, indentations. Ideally, the base should match the level of the bottom window stand. It differs in that it is presented in the form of a recess. If there is plaster or other mortar on it, then before mounting the tide, you will need to clean the stand. If the recess is too large, then you will need to make a lining of plastic wedges or wooden blocks.
Do not forget that there should not be any gaps between the sides of the tide and the plane of the window frame.
Caps will need to be attached to the sides of the tide to protect against rust and facilitate installation work. Instead, you can still bend the edges at an angle of ninety degrees. Next, the tide is installed in the right place, pressed against the recess and then fixed with screws. It is best to use in this case galvanized, with a large hat screws, which are also called press washers. Rivets still look neat, but working with them is not so easy. The distance between the mounts should be twenty centimeters, therefore do all measurements and level everything according to the level.
Next, you need to raise the edge of the ebb so that the tube from the cylinder with foam calmly goes under it. Foam the entire plane. If there are supports under the tide, then foam everything carefully so as not to displace them.
Attention! Foam will expand and increase in volume, so watch for it. In addition, a press will be required at low tide (eggplant with water, foam blocks, bricks will do). So that they do not scratch the coating of the tides, make a lining of timber, oilcloth, linoleum or other material. Weight should be distributed evenly.
For a day, the foam will seize, after taking care of sealing the ebb and slopes. Excess foam will need to be removed with a clerical knife, also remove the remaining protruding silicone. We believe that you will not have problems with the installation, because this task is not the most difficult. The main thing is to do the work measured, be patient and not rush. Do not save on materials and follow all our tips. If you can’t do it all yourself, this is not a problem, just contact the experts for help, they will do everything quickly and competently.