To sharpen knives, many people turn to workshops. However, special machines for this purpose are sold in stores. They exist of different types and have their own characteristics. The drive distinguishes between tape and disk devices. Many models are manufactured in closed cases and are absolutely safe. It should also be noted that there is a good machine in the region of 20 thousand rubles.
How to choose a model yourself?
Many experts advise giving preference to disk devices. First of all, they allow you to quickly gain momentum. Parts in this case wear out slowly. The design must be provided with a closed housing.
It is also important to pay attention to the diameter of the saw blade. On average, it is 13 cm. If we talk about tape models, they are produced of low power. The design they most often have is open type. A high-quality belt grinding machine for knives in the region of 12 thousand rubles will cost.
Reviews about "Jet 10"
Many customers give positive feedback on this machine. Its rated power is 3 kW, and it does not consume much electricity. Directly the engine is installed collector type. Guides in the device are located behind the pulley. According to the owners, the connection cable is provided for a long one. The plate in the device is made of steel. The lower block in this case is mounted on a special leg.
To adjust the speed of the disk there is a special regulator. Also, owners note the simple design of the device. If necessary, you can clean the plate yourself. The casing in this machine is made of rubber. The noise level of the presented model does not exceed 30 dB. She allows to use knives up to 5 mm thick. Her grinding speed is very high. The indicated grinding machine (market price) costs about 21 thousand rubles.
Jet-12 model parameters
The specified model is equipped with a powerful collector engine. On average, a disk makes more than 2 thousand revolutions per minute. The lower block in the presented modification is made of steel. The legs are installed with rubberized gaskets. The disk itself rotates on a special shaft. The maximum thickness of the knife is allowed in 5.5 mm. You can buy this machine in the store for 18 thousand rubles.
What they say about the Touch Pro
The Touch Pro grinder stands out with its sturdy frame. In this case, the stand is made of metal. For large knives, this model is ideal. It is also important to note that the disc is used with a diameter of 13 cm. The power consumption of the model is negligible. If necessary, the speed of the disk can be adjusted. Guides in the specified model are located in horizontal position.
For safe use, the Ganzo Touch Pro grinder has a guard. The grinding surface of the model is made with a special coating. The shield in the device wears out very rarely. It is also important to mention the compact dimensions of the machine. If you want to transfer it to a new place, it will not be difficult. You can buy a spare wheel for a grinder at a service center. The indicated model costs only 13 thousand rubles.
Opinion about "Eurotech-2001"
These grinding machines receive good reviews from consumers. However, they also have disadvantages. First of all, it is important to note that knives can be used up to 4 mm thick. In this case, the disk is set to a small diameter. The tape in the presented device is 2.1 mm thick. The plate in the machine is made of aluminum. For the convenience of using the tool there is a roller mechanism. The guides of the model are in an upright position. If desired, they can be cleaned. The model weighs a little, so it can always be moved. The fence in this case is absent. It is also important to note that the machine does not provide a pin. According to the owners, the lunette sometimes breaks. However, it is important to mention sturdy racks. You can buy this machine in our time for 23 thousand rubles.
Features FDB TS630 DMX
The specified knife grinding machine has strong discs. Guides for the model are on the sides. If desired, they can be removed. It is also important to note simple controls. In this case, the speed of the discs can be adjusted. In general, the lower block is able to withstand heavy loads.
According to the owners, the machine has no problems with stability. For the convenience of using the tool there is a special corner. Fencing in this case is not provided. Shelves are used to fix the disks. You can buy this machine in the store for 18 thousand rubles.
FDB TS750 DMX Reviews
The specified grinding and grinding machine was widely appreciated by many for its compactness. In total, the model has two guides. The case itself is made with a protective stand. Rollers for this device are not provided. According to customers, cleaning the tool is easy. The power of this machine is 3.3 kW. It is able to work from a network with a voltage of 220 V. The maximum thickness of the knife is allowed at 4.5 mm. The flywheel is missing in this case. The stop is fixed through the upper beam. You can find the specified machine in the store at a price of 15 thousand rubles.
Model Parameters FDB TS940 DMX
This grinder is best suited for domestic use. It is quite simple to use. The case is provided for it is low, and the machine weighs only 13 kg. There is no fence for this model. In a minute, the disc is capable of doing about 2 thousand revolutions. If necessary, the guides can be cleaned independently.
Directly the shaft in the device is mounted on rollers. The casing is not used in it. If you believe the owners, the machine is quiet enough. However, the model still has disadvantages. First of all, this concerns the rapid wear of the flange. Some consumers complain of damage to the pintles. In this case, the caliper must be lubricated periodically. You can buy this machine for 22 thousand rubles.
What they say about the Corvette 470 machine
This machine many choose for its versatility. It allows you to handle knives of different thicknesses. It is also important to mention the large diameter of the disk. All this makes it possible to sharpen the edge of the knife without any problems. According to the owners, the device is shaking a little. However, the noise of the machine is annoying to many. The sound level of the presented model is at around 45 dB.
Flywheels in the device are mounted behind the shaft. The case of the model is not wide. If you wish, you can rearrange the device. The guards of this model can be cleaned independently. It is also important to mention the strength of the guides. The flange in the device is made of aluminum. You can buy this machine in the store for only 18 thousand rubles.
Opinion about the "Corvette 500"
This machine is specially designed for domestic use. In addition to knives, it is possible to grind various metal objects on it. Its power is low, but the model has many advantages. First of all, buyers note the strength of the structure. The caliper in the device is made of steel. The legs of the model are included in the kit with rubberized gaskets.
If desired, you can adjust the speed of the disk. The flange of the model is made of aluminum. A cover is used to protect the device. Due to it, the noise level does not exceed 33 dB. The shield in this case is not installed. Also, this machine is not equipped with a protective fence. Thus, when using it, you need to be extremely careful. You can buy this model today for 23 thousand rubles.
Characteristics of the Corvette-510 machine
The specified machine is equipped with a 14.5 cm disk. The upper plate of this device is attached to the spring. The corner is made of aluminum alloy. If you wish, you can clean it yourself. If you believe customer reviews, then this machine breaks very rarely. However, it is important to note its low power. It is not suitable for long knives. The maximum thickness of the product is allowed at 3.5 cm. The protective cover in the device allows you to work safely.
It is also important to mention the compact design. The support is used metal, and is able to withstand heavy loads. The speed of the disc is easily adjustable. Also mentioned is tool stability. The bed of the model is made of steel. You can purchase this machine for 22 thousand rubles.
Profi Cook 1090 Reviews
This machine (grinding) in our time is in great demand. In this case, the plate is mounted with a roller mechanism. The disc itself is used with a diameter of 13.6 cm. There is no transmission system for the device. It is separately important to mention the quality of the case. It is made with anti-vibration system. If desired, the bed can always be adjusted.
The disk in the device is used durable, and sharpen knives very high quality. In this case, the user is able to change the angle of the position of the product. Guides in the machine are located under the plate and are in a vertical position. If you believe the owners, then the machine can last a long time. You can buy it for 17 thousand rubles.
Profi Cook 2030 model parameters
This machine (grinder) is very rarely used in everyday life. First of all, it is important to note that it weighs as much as 22 kg, because it is problematic to rearrange it independently. Also noteworthy is the width of the structure. The bed in the product is made of aluminum. Directly, the flange is located behind the clamping spring. If you believe the owners, then cleaning the specified device is easy. It is also important to mention ease of use. The roller mechanism of the device is not provided. There is a possibility to regulate the rotation speed of the disk. The user can buy this machine for 15 thousand rubles.
What they say about Profi Cook 1055
This machine (grinding) receives positive feedback from customers. If we talk about the parameters, then the power of the device is 3 kW. The disk is set at 13 cm. A cover is used to protect the system. The volume level of the device does not exceed 20 dB. The flange of the model is not wide. The plate itself is made of aluminum and does not weigh much. Flywheels at the machine are not used. The engine is located at the bottom of the structure.
The roller mechanism is located directly under the plate. Knives on this machine can be processed up to 4.5 mm thick. The grinding speed is high. It is also important to mention the long power cable. Thus, the machine can be installed anywhere. The model does not have an anti-vibration system. In our time, such a machine (grinder) costs about 19 thousand rubles.