Pumping equipment is used everywhere today; it is necessary in industry and in everyday life. One of the most popular today is the Jumbo pumping station, which is offered for sale in several varieties. For example, centrifugal pumps have a built-in ejector, which is connected to the pipes, which contributes to the effective absorption of liquid. The pump does not have special requirements for the purity of the water, in addition, it may contain dissolved gases. If you are interested in these products, you should familiarize yourself with some models in more detail, each of which has certain characteristics. It is necessary to choose a device depending on the required power and the load on the equipment, otherwise you may overpay or run into insufficient power models. About them and will be discussed below.
Reviews of the pumping station brand 60 / 35P-24
This model will cost the consumer 8500 rubles. It is a device that can cope with the supply of clean water from reservoirs, wells, wells and open reservoirs. This automatic pump is used to increase pressure in the pipelines, as well as for water supply and irrigation of landings. According to customers, the installation is perfect for solving problems at the summer cottage.
The Jilex Jumbo 24 pumping station can be immersed 9 meters, while the maximum water head is 35 meters. As for the maximum volume of fluid supply, you can get 60 liters in one minute. The capacity of the station reaches 3.6 m 3 per hour. This equipment works from a 220-230 V network, which is very convenient in everyday life. According to users, the output manages to get clean water, and at the time of suction, the size of the filtered particles can reach 5 mm. Permissible water temperature may vary from 1 to 50 ° C. You will need a parameter such as the diameter of the connector, it is equal to one inch. Users emphasize that it is very convenient to use the device, because the length of the power cord is 10 m.
Model Specifications
The pump station "Jumbo 60/35" should be installed horizontally, the temperature of the external environment can vary from 1 to 35 ° C. The design has a pressure tank, but control is automatic. The pressure in the system will be maintained at a certain level. The tank capacity is 24 liters. A winning feature of this model is the electronic control of the liquid level. The pump will independently monitor the flow rate, turning off and on when equalizing the pressure. The equipment will turn itself off in the event that the pressure drops. But the necessary parameters of pressure can be set by the consumer independently.
What else you need to know about the model
The pump station "Jilex Jumbo 60/35" is attached using connecting fittings. The device is supplemented by a built-in ejector, pressure switch, hydraulic accumulator and pressure gauge. Wear resistance is ensured by the cast-iron housing, as well as the most durable impeller, in the manufacturing process of which high-quality plastic is used. The motor is protected from overheating by cooling the fan, the thermal relay shuts down the pump if the motor starts to overheat. Overheat protection is activated when the temperature on the winding rises to a critical limit.
Reviews of the pumping station brand 70 / 50N-24N
The pumping station "Jumbo 70/50" will cost the consumer 13,500 rubles., This price, according to customers, is quite acceptable. The equipment has a capacity of 1100 watts, and the maximum productivity in water is 4200 liters per hour. The equipment will be able to pump water from a depth of 9 m, while the liquid must be clean. The maximum height is 50 m, the tank volume is 24 liters. According to users, the case is durable, because it is based on stainless steel. The weight of the device is quite impressive and is 16.8 kg. This, consumers say, is not always convenient.
Model Performance Reviews
The Jilex Jumbo 70 pumping station has many advantages, but there are also some disadvantages. A number of users, for example, notes that the duralumin of the case after some time becomes unusable. Despite the fact that the manufacturer provided the equipment with a soft start, some consumers doubt it. Among the advantages, it is noted that the base of the case is stainless steel. If you install the equipment in a well house, where the humidity is quite high, then the material copes with aggressive influences. The pressure, as practice shows, is quite high at the outlet, but the operation of the device is accompanied by noise. That is why, if you will use the Jumbo pumping station, it is best to make a soundproofing well, which will make your stay on the site more comfortable.
Features of the model "Jumbo 50/28"
The power consumption of the model is 500 W, and the volume of the storage tank is 24 liters. The equipment capacity reaches 3 m 3 per hour, you can purchase this device for 3600 rubles. This station is economical, cheap and simple in design. The main purpose is to supply water to summer cottages and houses, which are located 28 meters from the premises where the equipment is installed. This Jumbo pumping station is almost no different in composition from other samples of the company's lineup, however, the power consumption is the lowest. And to install this station, it is necessary to connect a non-return valve to the place of the suction pipe. If an open reservoir or a well is used as a source, a non-return valve is installed at the end of the pipe; in the well, this method of placement is acceptable if there is a casing.
This Jumbo pumping station should be connected to a suction pipe, which gradually rises to the equipment, there should be no differences in height, as air can accumulate in these places.
Conclusion
When installing the Jumbo pumping equipment, it is necessary to check that all connections are tight, otherwise there will be air leakage in the intake pipe. If you encounter such a problem, then the device will simply stop supplying water. You can fix this problem quite simply, for this you just need to remove the differences in height, then the device will resume work.