If you are familiar with the features of processing lumber, then you should be aware that sawing at an angle is a rather difficult task. Using a miter saw, you can solve it by ensuring high accuracy and obtaining the required cutting angle. Miter boards are common today with the following types of work:
- carpentry;
- assembly
- finishing.
With the help of such equipment door frames are made, floors are laid, window frames are made and much more. If you decide to choose such a unit, you should know what features to pay attention to. Thus, the master must decide for what purpose the purchase is made. If the saw will be used quite rarely, then you can purchase a tool with standard functions. If you plan to carry out large volume sawing work, you can purchase a professional saw.
It is important to take care of safety, the protective cover is responsible for this in the tool, it closes the disk during operation. Estimate the size and weight of the device. If these parameters are too impressive, it will make work difficult, and your hands will quickly get tired. Among others, a miter saw Metabo KGS 216 M is presented on the market of modern equipment, and it will be discussed below.
Saw Overview
The above equipment will cost consumers 18,300 rubles. It is a device with a laser guide and a bright LED. These features guarantee precision in operation. The workpiece can be securely fixed, which is guaranteed by special clamps.
You can easily replace the saw blades thanks to the ability to lock the spindle. You will not need to dismantle the protective cover. The manufacturer provided easy access to the brushes, you do not have to contact the service center to replace them. The Metabo KGS 216 M cross-cut saw is equipped with a dust-collecting bag that allows you to maintain a clean workplace.
Specifications
The power of the equipment is 1200 watts. The device works due to the brush motor. You can work at an angle of 90 °, delving into the material by 65 mm. If you set the angle equal to 45 °, then the maximum cut width will be 205 mm. Among the additional functions, it is necessary to highlight the adjustment of the depth of cut. The manufacturer supplied the equipment with a 2 m cable. The device weighs 13.5 kg. It allows horizontal movement. Left and right the table can be adjusted by 47 °.
Before purchasing a Metabo KGS 216 M cross-cut saw, you should pay attention to the fact that it does not have a soft start. There is also no support for constant revolutions under load in the unit. The tilt of the saw to the left can be carried out 47 °, as for the tilt to the right, then it can be 2 °. The number of revolutions per minute reaches 5000. The dimensions of the miter saw Metabo KGS 216 M, reviews of which it will be useful for you to read, are 760x475x340 mm. Consumers like that the device has a laser and a backlight, but there are no speed adjustment options. If you set the angle equal to 45 °, then you can go deep into the material by 36 mm, as for the maximum cut width at an angle of 90 °, this parameter is 305 mm. The diameter of the saw blade is 216 mm.
Reviews about the saw
Miter saw Metabo KGS 216 M, according to consumers, has many positive features, among them are:
- traction function;
- blocking of a saw head;
easy access to brushes; - laser guide for accurate cuts;
- smoothly extending table extension.
Consumers especially emphasize that they like a rather strong case, which has a reliable design and is made using aluminum casting technology. The saw is quite easy to transport. Sawdust is effectively discharged during operation and enters the receiver through an integrated funnel.
Home masters emphasize that the most common angles can be quickly adjusted using the fixation point. The saw will be able to handle even the longest rails and panels, which will help the function of the smooth movement of the table. For safety, the manufacturer supplied the equipment with high stops, which, if necessary, can be shifted to the side. The workpiece in front or on top can be reliably fixed with clips for the material, which, according to consumers, is very convenient. In order to replace the saw blade, you can use the spindle lock.
User's manual
At the workplace during operation of the miter saw Metabo KGS 216 M, the technical characteristics of which are described in the article, order must be maintained. Otherwise, the risk of injury is increased. The floor should be cleaned of scraps and chips. To work should begin meaningfully. You should not start using the machine if you cannot concentrate. The workplace should be well lit.
Do not use the machine near flammable gases or liquids. Do not expose the instrument to rain. The equipment must not be operated in a humid or damp environment. Miter saw Metabo KGS 216 M, the operating instructions of which you must have studied before starting work, has a power cord. It should be used only for the purpose for which it is intended. From time to time, the extension cable must be checked; it must be replaced if it is damaged.
Workpiece trimming should not be removed until the saw blade stops. It is allowed to cut workpieces, the dimensions of which allow them to be held during sawing. To do this, use clamping devices or a vice. Do not try to stop the saw blade by pushing it on the side. If the tool is not used for some time, then the plug must be removed from the outlet. The tool must be stored in a dry place, and gloves must be worn before changing the cutting tool.
Extension set
The miter saw Metabo KGS 216 M 619261000 has a table extension. To install it, you must remove the extension element from the package. There are screws on the guide plate, they must be unscrewed. The slats are inserted into the seat slots. In this case, it is necessary to ensure that the emphasis can be thrown up. The tool is lifted by the front legs, after which you can tighten the bolts on the slats. The master should set the necessary table width and strengthen its extension with the locking lever.
Installation Features
The miter saw Metabo KGS 216 M 619260000 is used only after you manage to ensure maximum safety. For this, the equipment is fixed on a reliable foundation. As it can be used a workbench or worktop. The height should be 800 mm. The tool must be reliably installed when processing fairly large workpieces. For long elements, additional stops can be used.
The equipment can be used mobile, for this it is screwed to a carpentry or plywood plate, its shape should be square, while the side is 500 mm. As for the thickness, this parameter should be equivalent to 19 mm or more. Using clamps, the plate must be fixed to the workbench.
Features sawing blanks
The cross-cut saw Metabo KGS 216 M must be serviced from time to time. Before starting work, make sure that the protective devices are in good condition. When sawing, the workpiece must be fixed in the jig. Elements that cannot be fixed are not worth sawing. The workpiece should be pressed to the table during sawing, it should not be skewed. It is important to exclude the possibility of blocking the saw blade, as this can lead to an accident.
If it is necessary to make a direct cut, then the transport lock must be removed. The saw blank must be turned up. The workpiece should be pressed against the stop and clamped using the tool. If the element has an impressive width, then the workpiece must be pulled towards the operator. The saw head must be pressed against the workpiece with some force so that the engine speed is not too low. The workpiece should be sawed at a time. The switch is released slowly and the saw head is slowly retracted to the upper position.
Features of changing the saw blade
Miter saw Metabo KGS 216 M, the characteristics of which you can find in the instructions or in the article, may require replacement of the saw blade. After cutting, the blade may remain hot. He should be allowed to cool. Hot saw blade must not be cleaned with flammable liquids. Even if the saw blade does not rotate, there is a risk of cuts.
When tightening and loosening the clamp screw, the guard must be above the saw blade. The craftsman should wear gloves when changing the blade. The saw head must be locked in the up position. You can use the lock button to lock the saw blade. The safety stop must be loosened and the protective cover moved upward while holding it. The outer flange is carefully removed, like the saw blade from the shaft. The retractable clamping casing must be closed again.
Operator recommendations
Miter saw Metabo KGS 216 M, an overview of which is presented in the article, can be used for cutting long workpieces. In this case, suitable supports must be installed on both sides of the tool. When it is necessary to cut at an angle, the workpiece should be held to the right of the saw blade.
The miter saw Metabo KGS 216 M copes with sawing fine workpieces very well, while using an additional stop, which can be a suitable board, strengthened to the stop of the tool. If we are talking about cutting a curved board, it should be attached to the stop with the curved part out. Do not start sawing workpieces installed on the edge. They should be placed flat.
Possible malfunctions and solutions
You must remember that accidents related to the operation of the equipment described are most often associated with malfunctions, so you must remove the power plug before each troubleshooting. After completing such work, you need to carry out the installation and make sure that the safety devices are working.
If you notice that the trimming function is missing, the transport lock may be locked. To do this, the safety stop is removed and loosened. When the machine is faced with the problem of power reduction, the saw blade must be replaced. It may become dull and have side burns. Sometimes it happens that the disk is simply not suitable for the material.
Consumers who use the Metabo KGS 216 M cross-cut saw sometimes experience intense vibration. Deformation of the saw blade can lead to this. It should be replaced. Incorrect installation of the drive sometimes leads to vibration. If you encounter a problem with the difficulty of running the turntable, then sawdust can cause this, which simply needs to be removed.
Troubleshooting Tips
Even when using the highest quality power tools, some problems sometimes arise. If you encounter diverging surfaces in the lateral stop, this may affect sawing accuracy. The operator therefore gets a different result when filing right or left. If you have a miter saw Metabo KGS 216 M, a photo of which you can find in the article, then you need to remove the emphasis from it, and then prepare a piece of getinax. Its surface should be even and smooth.
From the material, patterns should be made so that they turn out to be slightly larger than the surfaces to be leveled. The material is laid on a reference base, for example, on the surface of a countertop. A layer of epoxy is applied to both surfaces of the stop; getinax must be laid on top. As soon as the resin dries, you need to trim the excess, this will allow you to get an even plastic coating.
Recommendations for repairing the engine and gearbox
Miter saw Metabo KGS 216 M, reviews of which were presented above and can help you make the right choice, may encounter a problem of engine or gearbox breakdown. This is indicated by the lack of disk rotation. Sometimes a burning smell starts to come out of the tool body, the saw does not gain power, and sincere in the engine area.
If you notice that the tool has become unstable, then you should conclude that the gearbox or motor is out of order. The mounting screws of the motor housing must be unscrewed and the disk removed, and then the gearbox removed. The operator should twist the shaft; it should not rotate. All elements should be checked for integrity - if unsuitable elements were found, then they should be replaced. You may need to clean the grease and apply a new one. The motor housing is disassembled, the rotor and stator are checked for short circuits. Brushes and collector should be inspected. If one of the parts was at least 40% worn out, then both must be replaced.
Conclusion
Before choosing any power tool, it is important to decide what loads will be placed on the equipment. If you plan to use the device for domestic purposes, then the unit of the same class is perfect. Typically, such saws do not have functions for which you have to overpay. Semi-professional models are great for craftsmen who use the tool every day. However, such saws are not able to endure such loads as professional devices. The latter are ready to work every day without a break for several hours.