Speakers vary in the number of channels supported. Depending on the type of device, model parameters change. The main indicators of speakers should include the maximum frequency, power, input impedance, as well as conductivity.
The device parameters are affected by structural elements. The standard speaker system includes speakers, a subwoofer, a wired amplifier and a crossover. In order to understand this issue in more detail, it is necessary to consider specific models.
Razer Ferox 2013 system parameters
The main characteristics of the speaker system Razer Ferox 2013 pleasantly delight music lovers. The speaker power is 4 watts. The system of protection against phase fluctuations in this case is available. The amplifier is of a transitional type. The crossover of the model is designed for three channels.
If you believe the reviews of experts, the frequency of the model is quite high. Of the features of the speaker system, it is important to note a high-quality switched core. The parameter of ultimate conductivity he raises strongly. System from isolation of extraneous noise is. Acoustic input voltage is 40 ohms.
Speakers 10 Mas : specifications, photos
This speaker system has the following characteristics: ultimate power 5.5 W, frequency 30 Hz, nominal impedance 40 dB. The sensitivity indicator in the device is negligible. The crossover of the model is used with an adapter. Acoustic wave tube is not provided. If you believe the reviews of experts, then changing the sensitivity is quite simple. The subwoofer in this model is used with a terminal amplifier. The output voltage parameter of it is 13 V. The model has a system from phase noise.
A horn is used with two pins. A filter is used to suppress extraneous noise. A sound stabilization system is provided for the first class. Fatigue in this case does not exceed 80%. Linear distortion protection system not provided. The phase inverter of the presented system is absent. The sound frequency maximum is 250 Hz.
Audiofocus EVO 12A system description
First of all, it is important to note that these are active speakers. Features Audiofocus EVO 12A is quite high. The speaker power is 6 watts. The power consumption parameter of the model is at 2 watts. The diffuser is used with two transition filters. If you believe the reviews of experts, then problems with lowering power rarely occur. The phase noise protection system is used in the first class.
The input resistance parameter reaches a maximum of 67 ohms. The threshold impedance in the device is negligible. The sensitivity of the speaker is at 5 mV. The system of protection against linear distortion in the presented acoustics is absent. The signal conductivity is at a level of 6 microns. The amplifier in this case is used openly type. To adjust the volume there is a rotary controller.
Trust Ebos C 90 System Settings
The C 90 speaker system has the following characteristics: minimum frequency is 20 Hz, power 30 W, input impedance 45 Ohms. The horn in the device is used with a sensitivity of up to 3 mV. If you believe the reviews of specialists, then problems with lowering the power are observed infrequently. The wave tube is used with an adapter. In total, the model has two resistors.
The phase inverter is used wired type. The limit impedance parameter is exactly 60 dB. The linear distortion protection system is used in the second class. The crossover is provided with a conductivity of 6 microns. For more detailed specifications of the C 90 speakers, see the manual.
Characteristics of the 25AS-Z28 model
Electronics 25AS-Z28 - speaker system. The characteristic of the device impresses many music lovers. First of all, it is important to note that the speakers are used with a power of 50 watts. The input resistance parameter is at around 30 ohms. The system of protection against linear distortion is provided for the third degree. If you believe the reviews of experts, then the threshold conductivity of the model is all right.
The phase inverter in this case is made with a coaxial output. A phase noise protection system is not provided. The limit impedance parameter is 78 dB. The sensitivity of the wave tube is 3 microns. The emitter is used in the PP20 series. Problems with lowering the power of this system are not terrible. In total, the device is capable of supporting no more than three channels.
System Description Defender Orchestra M80
This speaker system has the following characteristics: power 40 W, input impedance 34 Ohms, and ultimate impedance 89 dB. The phase inverter is used with an output voltage of 13 watts. The linear distortion protection system is used in the second class. The horn for this system is missing. Directly the filter is provided by the wave type.
The threshold conductivity parameter is 3.4 microns. The speakers are used with a diameter of 12 cm. A coaxial output from the diffuser is not provided. The maximum amplifier output in the device is 10 V. The phase noise protection system is used in the third class. The sound frequency is at least 13 Hz. These are the main features of the Defender Orchestra M80 speaker systems.
System parameters Defender Orchestra M85
The frequency response of the speaker systems Defender Orchestra M85 are at a high level. Speakers are used with a power of 30 watts. The phase distortion protection system is standardly used in the second class. If you believe customer reviews, then problems with lower power are rare.
The phase inverter is installed with one adapter. The ultimate sensitivity is 3 mV. The system of protection against linear distortion is used in the third class. The sound frequency maximum is 350 Hz. The threshold impedance of the speaker system does not exceed 60 dB. The core has a reducibility of 5.5 microns.
Characteristics of the model Defender Orchestra M86
This speaker system has the following characteristics: power 50 W, power consumption 3 V, conductivity 4.5 microns. The phase inverter is used with a gasket. Problems with extraneous noise are rare. The sound frequency is at least 30 Hz.
There is a system of protection against linear distortions. The threshold impedance parameter is 60 dB. The wave tube is used with an amplifier. The speaker is used with a size of 10.3 cm. The emitter is characterized by high conductivity of the signal. The input impedance of the system is 34 ohms. In total, the model supports no more than two channels.
Aspiring HitBox 100 System Description
The Speakers of the Aspiring HitBox 100 pleasantly surprise many users. The speakers in the device are set to 20 watts. The system of protection against linear distortion is provided for the first class. The phase inverter conductivity is 3.3 microns. The sealant in this case is absent. If you believe the reviews of experts, then the phase noise of this model is not terrible. The wave tube of the speaker system is used with an adapter.
The maximum frequency of the device is 340 Hz. The emitter is used with low signal conductivity. The input impedance of the modification is 45 ohms. The threshold impedance is exactly 30 dB. The minimum frequency of the model is at 12 Hz. The indicator of electricity consumption in the modification is low. The maximum horizontal dispersion is 30 degrees. The crossover of the model is missing.
Aspiring HitBox 200 System Parameters
This speaker system has the following parameters: power 25 W, power consumption 3 V, input impedance exactly 45 Ohms. The emitter is used without a wave tube. The seal in the device is made of rubber. The speakers are used with a diameter of 13 cm.
The maximum frequency of acoustics is 350 Hz. The maximum horizontal dispersion is 40 degrees. Problems with lowering the power of this system are not terrible. The minimum sound frequency is at around 30 Hz. The threshold modification impedance is 73 dB. In total, the device supports no more than five channels. The system of protection against linear distortion is applied to the third degree.
Features Aspiring HitBox 340
The performance of the Aspiring HitBox 340 speakers is at a high level. The power parameter is 50 watts. If you believe the reviews of experts, then problems with overheating of the seal rarely occur. The maximum horizontal impedance is 45 degrees. The phase distortion protection system is applied to the third degree. The phase inverter is used on three adapters.
The output conductivity parameter does not exceed 4.6 microns. The speakers are used with a diameter of 14 cm. The model has an output for the receiver. There is a coaxial connector on the bass reflex. If you believe customer reviews, the system uses a high-quality subwoofer. The crossover in this case is provided without an amplifier. The output frequency is at least 13 Hz. The linear distortion protection system is applied first class. The threshold impedance is 86 dB.
The vibration isolation layer is located under the bass reflex. The wave tube is used with a speaker. The limit sensitivity index is 2.2 mV. The maximum sound frequency is at 450 Hz. The core is not provided for the bass reflex in the model.