Infrared heaters have long proven themselves on the positive side. First of all, they are economical. Almost all models have a regulator that allows you to adjust the temperature. With proper use, energy consumption can be reduced to a minimum.
Installation of infrared heaters
Many in our time are preoccupied with the question of choosing a place to install an infrared heater. On average, this device has a length of about 80 cm, which is a lot. Today, manufacturers can provide floor, wall, and ceiling devices. The last option is in greatest demand. When installing the device on the ceiling, you can significantly save space in the room. Additionally, the air will be better warmed up. However, such infrared heaters also have disadvantages. First of all, they are associated with poor fasteners and the lack of installation at low ceilings.
Wall mounted devices also have their fans. The main thing is to choose a suitable place. There should be no flammable materials nearby (including on the wall itself). Furniture, in turn, must be located at a safe distance. Damage to the infrared heater if installed incorrectly can be significant.
The last type of installation is called floor. It is most common because it is the simplest. As a rule, a tripod or a small stand is included with an infrared heater. With it, you can easily adjust the height of the device. You can also quickly rearrange the infrared heater to any other place. And wall and floor installations require reliable installation of the device using brackets. Additionally, metal hooks and dowels can be used.
Cons of infrared heaters
Of course, any infrared heaters have disadvantages, and in some cases even can harm human health. Most often this is due to the wrong choice of a device that is not suitable for a particular room in terms of its characteristics. The second problem is improper installation of the heater. Certain problems may also occur when using these devices for too long. The first nuisance is the drying out of the skin. You can feel the harm of an infrared heater on yourself if you stay too close to a working device for a long time. The body will begin to actively lose moisture, dehydration will occur.
In some cases, powerful infrared heaters can cause damage to whole cells. This process is called denaturation. It is very harmful to look at radiation for a long time. This can result in damage to the retina. The last problem is the low installation of ceiling heaters. The distance between the device and the person’s head can be critically small. In this case, exposure to infrared rays often leads to headaches.
How to choose an infrared heater?
First of all, you need to pay attention to the power of the device. 1800 W infrared heater is able to heat a room with an area of 18 square meters. m. The second thing you should look at is the type of installation. If these are wall or ceiling options, then all the necessary parts for installation must go to the infrared heater. The thermostat is also a very important thing that will help regulate the temperature.
The best infrared heaters have a system of protection against overheating, which will protect it from damage during prolonged use. Moisture protection allows you to use the device on the street. The presence of a control panel is optional. The dimensions of infrared heaters can vary greatly. With a power of 1800 W, the device should have an average length of not more than 86 cm, a height of 20 cm and a depth of 10 cm. The weight of the heater should be around 3 kg.
Characteristics of an infrared heater "Almak IK 05"
This infrared heater has the following characteristics: power - 500 W, voltage - 200 V, current - 1.8 A. At the same time, you can heat an area of 6 square meters. m. This model has small dimensions: length - 73 cm, height - 16 cm, and depth - 4 cm. Moreover, the total weight of the device is 1.6 kg. It is mounted at a height of at least 3.5 m. Compactness and ease of installation can be distinguished from the advantages. All the necessary details are included. In general, these infrared heaters for summer cottages are well suited for garages. The cost of this model is low and amounts to 2200 rubles.
Characteristics of a heater "Almak IK 10"
What features do these infrared heaters have? Their technical characteristics are as follows: power - 800 W, voltage - 220 V, current - 2.7 A. Unlike the previous model, this device will be able to heat an area of 15 square meters. m. The average installation height is 3.5 m. The dimensions of this model are medium: the length is 133 cm, the height is 16 cm, and the depth is also 4 cm. An interesting design can be distinguished from the features. Thermostat for setting in stock.
Also, infrared heaters manufactured by Almak have rollover protection. But there is no moisture protection system, it upsets. This model is installed on dowels. It is also possible to buy floating brackets in the store and make the infrared heater more mobile. In addition, it should be noted that the cost of the model is about 2700 rubles.
What are the characteristics of the infrared heater Almak IK 11?
Compared with previous models, these heaters are infrared, their technical characteristics are better: power - 1000 W, voltage - 200 V, and current - as much as 4.6 A. Moreover, it should be noted that the dimensions of this model are the same as the previous device . Due to its high power, this infrared heater can warm a room up to 20 square meters. m
The optimum installation height is 3.5 m. In this case, the air will not be dry. Convenient controls can be distinguished from the features of this model. Setting the temperature on it is very simple, despite the lack of a remote control. In general, these infrared heaters for summer cottages are also suitable for small warehouses. This model is on the market 2990 rubles.
Infrared heater "Almak IK 16": characteristics, price
And finally, the latest in this line of infrared heaters. They have the highest specifications: power - 1500 W, voltage - 220 V, and current - 6.1 A. At the same time, the maximum heating area increases to 30 square meters. m. This model is considered the most powerful device of the Almak trademark.
Her dimensions are impressive: length is 193 cm, height - 16 cm, and depth - all the same 4 cm. The mass of the device is 5.2 kg. In general, this model can be described as quite powerful and convenient. It should also be noted that the company Almak infrared heaters have pretty good thermostats. A security system is also installed. The maximum case temperature reaches 90 degrees. The cost of this model is 3600 rubles.
New gas infrared heaters Bullu Galaxy BIGH-45
This infrared gas heater reviews is good. Many owners liked it because of the high power, which is 4200 watts. The voltage is 220 V, and the gas pressure is at around 30 mbar. In this case, you can heat the room with a total area of more than 50 square meters. m
It is also important to note that propane gas is used in this model. Ignition is carried out using a pie. In general, there are three degrees of power: the first - 1550 watts, the second - 2900 watts, the last (maximum) - 4200 watts. The dimensions of the device are quite large: length - 7200 mm, height - 420 mm, depth - 360 mm. The total weight of the device is 8.4 kg. This model is installed indoors on the floor.
Also, this infrared gas heater received good reviews for a durable ceramic panel. In turn, the case of this device is fully enameled. Due to this, it does not gain a high temperature even with prolonged use. In general, this model is characterized as powerful and mobile. It costs in stores an average of about 6300 rubles.
Characteristics of the infrared heater Bullu BIH-L-2.0
Consider these infrared heaters. Their technical characteristics are as follows: power - 2000 W, voltage - 220 V and frequency - 50 Hz. This model is mounted on the wall using the brackets that come with the kit. The heater body is completely steel and very durable.
Also, manufacturers installed a special reflector with ribs. The protective grille of the device is chrome plated. A thermostat as well as an overheat protection system are available. The dimensions of this model are average: length - 740 mm, height - 180 mm, and depth - 90 mm. The design of this Ballu infrared heater is stylish, but not catchy. It will fit into almost any interior. The cost of this model is 3100 rubles.
What is the difference between the infrared heater Bullu BIH-L-3.0?
This infrared Ballu heater has the following characteristics: maximum power - 3000 W, voltage - 220 V, current frequency - 50 Hz. The dimensions of this model are much larger than the previous device. The heater is 940 mm long, 180 mm high, and 90 mm deep.
It should be installed on the ceiling not lower than 3.5 m. Additionally, the kit includes a convenient outdoor tripod. Overheat protection system in stock. Also in this infrared heater Ballu BIH-L-3.0 built-in thermostat. The protective grill in this model is chrome plated and is available with perforation. The body of the device is steel and has special reflectors. The cost of the model on the market is approximately 3,100 rubles.
Infrared heater NeoClima NCS-2.0: review, specifications, price
These infrared heaters NeoClima of a famous Chinese brand are made in Turkey. They are mainly used in the industrial sector. Mounted on special telescopic stands. The power of the device is enough to warm the room up to 18 square meters. m. The voltage is at a damage of 220 V. The heating power is 2000 watts. The rated frequency of the infrared heater is 50 Hz. The power consumption of the device is 2 kW, and the current strength is 9.1 A. The NeoClima NCS-2.0 infrared heater is connected using the power cord with a euro plug.
The control is mechanical and is made by an adjustable thermostat. The power consumption of this model is negligible. Additionally, it is possible to choose from two modes (zone and point). In general, this model can be described as reliable and practical. The cost of an infrared heater is 4500 rubles.
Features of the infrared heater NeoClima NCS-2.8
This infrared heater is mainly used in various enterprises. Like the previous model, this device comes with a telescopic stand. It allows you to easily adjust the height and adjust the position of the device. In the form of a heating element there is a carbon rod. The heating area is from 22 to 29 square meters. m. The rated power of the equipment is at the level of 2800 watts. Moreover, the power consumption is 2.8 kW. Standard voltage - 220 V at a frequency of 50 Hz. This model is characterized as single-phase.
Of the features, a large current strength of 12.8 A can be distinguished. In general, this heater has an optimal heat distribution. In this case, the temperature can be easily adjusted using the built-in thermostat. Additionally, there is a mode for saving energy. A moisture protection system is installed, and this is good. The dimensions of this model are average: length - 880 mm, height - 260 mm, depth - 125 mm, with a weight of 5.4 kg. These infrared heaters cost (average market price) 5100 rubles.
Infrared heater NeoClima NCS-2.5
This infrared heater is the most versatile. The length of the device is 880 mm, height - 260 mm, depth - 125. It should also be noted that the weight of this model is 5 kg. It is mounted on the floor using a telescopic stand or on the wall (thanks to the bracket). Moisture protection system is available and working properly.
In addition, it should be noted that his head does not hurt, since the heater does not dry the air in the room at all. The thermostat of the device can be set for zone or spot heating. The efficiency of this model is large. The current strength of the infrared heater is exactly 11 A. The voltage is at 220 V at a nominal frequency of 50 Hz. The total power consumption of the device is 2500 watts. All this allows you to heat rooms up to 25 square meters. m. These infrared heaters are standing (average market price) 4900 rubles.
What features does the Timberk TIR HP1 1500 have?
These Swiss heaters are collected by technology in factories in China. The configuration of this model allows you to install the device only on the wall. There are no floor stands in the kit. Heater power is 1500 watts.
This model also boasts a carbon heating element. Thanks to this, it is able to warm the area to 15 square meters. m. In this case, the power consumption is only 15 kW at a voltage of 220 V and a frequency of 50 Hz. Among the features of this single-phase infrared heater, a high current strength of 6.8 A can be distinguished. Of the shortcomings, many note the absence of a euro plug on the power cord. Device management is generally satisfactory. The angle of rotation of the device in assembled form is 45 degrees. Additionally, this infrared heater can quite successfully be operated in open areas. At the same time, he has a rather high heating rate. Given the power of the device, the minimum distance to a person during installation should be 1 m.
Also of the features can be noted the presence of a moisture-proof housing. In addition, manufacturers installed a security system when the heater overheats. This model is not afraid of moisture or dust. Its installation is quite simple, and all the necessary details are included. The minimum suspension height of the heater is 2 m. The dimensions of the model are average: length - 558 mm, height - 256 mm, and depth - 133 mm with a weight of 2.3 kg. The cost of this unit on the market is 5300 rubles.
Model Timberk TIR HP1 1800
This infrared heater is a floor heater. It differs from the previous model in that it has a capacity of as much as 1800 watts. Moreover, he is able to heat an area of 20 square meters. m. The heating element is carbon. Power consumption is 1.8 kW. In this case, the voltage is at around 220 V at a nominal frequency of 50 Hz. The current strength is 8.2 A, and the rotation angle is 45 degrees.
This infrared heater works great both in confined spaces and in open areas. Its difference lies in the possibility of installing a telescopic stand. The angle of inclination when installing the device on the wall is easy to change. The fastener that comes with the kit is durable. Electrical protection class is quite high. At the same time, this model boasts a moisture resistant housing. When overheating, the infrared heater turns off in emergency mode. Its dimensions are average: length - 668 mm, height - 256 mm, depth - 133 mm. It is easy to carry it from place to place, since it weighs only 2.5 kg. Its value in the market is 6500 rubles, which is a lot.
Infrared heaters of the company "UFO"
Infrared heaters of the UFO company are in great demand, so it’s stupid not to consider them. They differ from others not in high power, but in performance. As a rule, the company provides a large guarantee.
The presence of capillary thermostats in many models should also be considered. On average, infrared heaters "Ural Federal District" warm up the room in 30 minutes. Moreover, the coefficient of performance is 82%. Among the shortcomings, many distinguish bad stands for devices. Additionally, infrared heaters "UFO" are not protected from moisture. The most popular models are UFO Basic 1800 and UFO Star 2300.
Characteristics of UFO Basic 1800
This infrared heater (floor) has a power of 1800 watts.The heating area is approximately 18 square meters. m. Thermostat and overheat protection system are available. The resource of the heating element is 6000 hours.
, . , . , , . - 86 , - 17 , - 8 . 3 . 4100 .
UFO Star 2300
, , 2300 . 23 . . , , , . , . .
. , . "", , . . 6000 . , . , : - 86 , - 19 - 9 . 4,2 . 6000 .
Summarizing
, , . , . . "" , NeoClima . Timberk.