The most popular thing among fashionistas and fashionistas is a snood, a collar, a transformer, or a scarf pipe. Knitting or crocheting it can be knitted in just a couple of days. For this product, any thread is suitable: wool, wool mixture, acrylic, cotton, grass, Angora. All this is possible thanks to varieties of snud, which can be openwork, and dense, and thin.
What is a scarf pipe?
This product is knitted with needles 15, 30, 40, 60 cm wide and 30, 40, 75, 85 cm long. Decorative openwork scarves are long and wide. They can be worn with a loop, thrown over your shoulders like a poncho, and covered your head like a hood. More often, openwork snoods do not warm, but perform a decorative function.
For the cold season, they knit short pipes that protect the neck. For these purposes, choose a large pattern (rhombuses, braids, gum, bumps), since in this case the wrong side of the product will not be visible. If the snood will wrap around the neck several times, then pick up such a pattern so that it is not visible where the front and the wrong side are. For example, pay attention to handkerchief, rice knitting or elastic.
Scarf collar can be worn with any clothes and in different variations. Most often, snood is worn with a long loop, like a hood, or wrapped around the neck in two to three turns. With it, you can give a unique look to an open dress by throwing it on the shoulders in the manner of sweaters with lowered sleeves or a collar. Some young ladies use wide snood as a skirt.
How to knit a scarf pipe with knitting needles: elastic patterns
Choose the size of the product. Most often they take a standard size of 40 x 60 cm. Take a picture and knit a sample, according to which you calculate the number of loops and rows. Snood can be created on circular knitting needles as a whole finished product or from two paintings that need to be sewn.
Which pattern to choose for snud? A product with a three-dimensional pattern looks gorgeous, but unusual gum will also transform a scarf. Consider a few simple beginner schemes.
Pattern 1
Elastic band from ornaments. The number of loops should be a multiple of 5 (in the asterisks the part of the rapport is shown, which must be repeated until the end of the row).
- You knit all the odd rows: * 2 wrong loops (IP), then 1 front loop (LP), then remove the next loop as untied as a front loop (NPL) *.
- All even rows start with * 3 PI, followed by 2 LP *.
Pattern 2
Indian twisted column. The number of loops is a multiple of 4 with an additional loop.
- Odd rows start with 1 LP, * then knit 3 PIs together, then do not remove the received loop, but knit it with the front and then back again, 1 LP *.
- You even knit even rows.
Schematic of a snood
Scythe to any product give wealth, splendor. So, how does a scarf pipe fit with knitting needles? The description is simple:
- For a scarf, dial 126 loops and close them in a circle.
- Snud will contain two patterns: a handkerchief of 9 loops and a braid of 33 loops. It is from this calculation that you knit all the loops of the scarf, starting with a scarf pattern. Get 3 times the repetition of the picture.
- In the 14th row, you need to knit 2 PIs together in the middle of the scarf pattern, then 123 loops on the knitting needles will be obtained. Such reductions must be done in the 108th, 112th, 116th and 118th circles to give the product the desired shape.
- After 63 centimeters (the 120th row) on the knitting needles should remain after reducing 108 loops, which you close.
A circular scarf shawl fits in with alternating front and back rows. To create braids, you work with only 6 loops, while the first three are thrown onto the auxiliary knitting needle before or after work, knit them with the knitting needles on the working knitting needle and the same is done with the loops on the auxiliary knitting needle.
Description of knitting a scarf with a cord
For the product, take 300 g of yarn from 50% wool and the same amount of polyacryl, about 100 m in size per 100 g. For such threads you need thick circular knitting needles N 12-15. If you have not worked with such knitting needles, practice. Knitting should not be tight or loose. In a 10-centimeter sample there will be only 7 loops and 10 rows.
This is the easiest knitting. The scarf tube (transformer) is fully knitted with the front smooth surface and only in certain places holes are made using the yarn.
- Type 47 stitches and knit only 30 rows on circular knitting needles.
- Every 10th row you knit: * 2 loops together front, make 2 yarn (H), remove the loop as a front, knit 1 LP and pull it through the first removed (SLP), 2 LP *.
Please note that the crochets are knitted in the next row with ordinary facial. After 30 cm, close all the loops. The cord is knitted of 4 loops 1.3 m long. Pull it through the yarn. Sew brushes to the ends of the cord.
Elegant snood
For this model, it is better to take bright juicy colors: 200 g of acrylic with the addition of methanite (100 g about 400 m) and the same amount of fancy yarn (100% polyester). In shaped skeins of footage there will be less thread - 80 m in 200 g. Circular 4 mm knitting needles are suitable for knitting a scarf.
To start, make a piece of the product. Draw a rectangle with a length of 75 cm and a width of 37 cm. You start knitting with the length of the scarf with a regular hosiery pattern (either front or back loops). Due to the brightness of color and the combination of yarn of different densities, an elegant scarf tube (knitting) is obtained.
The alternation of rows:
- 23 rows of acrylic;
- one row of shaped threads.
After 70 cm, alternate one row of fancy and acrylic yarn. After 5 cm (this is 6 rows), close the loop. Such a snood can be worn over a classic coat like a poncho or worn like a hood.
Openwork snood
Thin yarn is better for an openwork pattern, where mohair is 56%, polyamide 30% and wool 14% and 3.5-millimeter circular knitting needles. It will take only 100 g (in 50 g 280 m). The scarf will be 40 cm high and 90 cm circumference. Now we will consider how to knit a light openwork scarf-tube with knitting needles. Work carefully with the description of the circuit, since in an even row the pattern repetition changes.
Dial 180 loops and knit 4 rows of garter stitch. In the fifth circle, all the loops will be facial. Here, evenly reduce 4 loops. Next, go to the main pattern:
- 1 row: 2 N (in the next row the first yarn is removed), 2 N, SLP, 5 LP;
- 2 row: 3 drugs, crossed front (2 drugs tied to the back wall together), 4 drugs;
- 3 row: 2 , 2 , 2 , , 3 ;
- 4 row: 5 drugs, crossed facial, 2 drugs;
- 5 row: 2 N, 4 LP, SLP, 2 N;
- 6 row: 6 drugs, crossed facial, 1 drug;
- 7 row: 5 drugs, 2 together facial (2 VLP), 2 N, 2 N;
- 8 row: 4 drugs, 2 VLP, 3 drugs;
- 9 row: 3 drugs, 2 overhead lines, 2 drugs, 2 N, 2 N;
- 10 row: 2 drugs, 2 VLP, 5 drugs;
- 11 row: 2 N, 2 VLP, 4 LP, 2N;
- 12 row: 1 LP, 2 VLP, 6 LP.
The main pattern is knitted 39 cm. Next is a series of facial loops, in which evenly reduce 22 loops (about 7 and 8 loops). 154 loops should remain on the knitting needles, which in the next 4 rows should be tied with a garter pattern and closed.