Bluetooth receivers are equipped with PAC audio outputs. List of reproduced frequencies depends on the manufacturer. Transmitters are typically used with diode extenders. They have an average range of 80 meters. The receiver overload indicator is at around 40 A. The voltage is transmitted to the device through compact adapters.
Models are very sensitive to high humidity, and this should be taken into account when using receivers. The intermediate frequency index is on average 500 MHz. Also, the modulation coefficient, which is measured in percent, should be attributed to important device parameters. To understand this issue in detail, you must first determine the functions of the devices.
Device assignment
Wireless receivers are designed to transmit audio. This process is carried out by modulating data. Adapters for models can be used with protection. Many devices have compatibility with smartphone operating systems. Modifications with the release of RA are suitable for music centers.
Wireless receivers are also used to connect consoles. Many modifications are made with coded capacitors. Such models are not afraid of frequency interference and cope well with overloads that occur on the channels. Only devices with dipole adapters are suitable for connecting satellite dishes. As a rule, they use a built-in module.
Specifications of Logitech K10 Receivers
This wireless bluetooth receiver is great for connecting second-generation consoles. If you believe the customers, then the malfunction of the adapter is observed quite rarely. The system of protection against frequency interference is applied in the third class. Video output CA in this case is missing. If necessary, the specified receiver can be flashed.
The frequency of the model is 500 MHz. Sensitivity at low workload is quite high. The antenna for the modification is used as a built-in type. It is also important to note that the model has very compact dimensions. The receiver is produced mainly in black. Audio output KKR in this case is available. Thus, the model copes with high frequencies remarkably.
To transmit a signal to the connector, a diode type extender is used. The display system of the model is missing. The receiver deserves special attention the presence of the sound output P20. Store the model is allowed at a temperature not exceeding 50 degrees. The specified bluetooth receiver in stores costs only 5800 rubles.
Model Grand-X BT45G
The melon bluetooth AV receiver is great for connecting satellite dishes. According to customers, the device works without failures. The transmitter for the modification is used with contact expanders. Sinusoidal noise to this device is not terrible. Harmonic oscillations from switches are also rare. The intermediate frequency indicator is at around 340 MHz.
For first-generation consoles, the device is not suitable. It is also worth noting that the model is made without a built-in antenna. At high humidity, the receiver must not be used. The maximum data transmission distance is 80 meters. The demodulation coefficient is at around 75%. The receiver overload parameter is not more than 40 A. There is no audio output of the RK in this case. The price for the specified bluetooth receiver starts at 4800 rubles.
Features of the Grand-X BT53G devices
For consoles and music centers, this bluetooth transmitter is great. Many praise him for compatibility with the Android system. It is also worth noting that the expander in the modification is of the collector type, and protection from sinusoidal interference is provided in this case. The video output of the PCA model, unfortunately, is missing. The maximum voltage rating of the receiver is 5.5 V. These models are capable of transmitting over a distance of 80 meters.
The antenna is used by the retractable type manufacturer. When transmitting a video signal, the capacitor reacts very quickly, and the response time on average is 1 ms. At a frequency of 300 Hz, the model behaves stably, and harmonic oscillations are practically absent. When buying a model, it is important to consider that CAC device formats are not supported. It is not suitable for connecting switches. The price for this bluetooth receiver in stores starts at 7 thousand rubles.
Characteristics of receivers Cliptec CL-BLU-ZB626
This is not an expensive and multifunctional bluetooth transmitter. Buyers praise him for the quick response and the presence of the port of Kazakhstan. The PAC format device supports without problems. The harmonic protection system is used in the third class. The device transmits data to a distance of not more than 100 meters.
The housing of the receiver is made compact. In hot weather, it is better not to use the device. The intermediate modification frequency is 600 MHz. There is an av-receiver with bluetooth in specialized stores from 5 thousand rubles.
Customer Reviews for Models Sony C30101
This model has the following parameters: intermediate frequency 340 MHz, overload 30 A, operating humidity 30%. According to customers, the receiver can be used with a connector. The system of protection against sinusoidal interference is applied in the third class. In this case, the antenna is used built-in type. The expander for the modification is used with two contacts. The device supports low-frequency channels without problems. The demodulation coefficient is at the level of 80%.
The range of the receiver in this series is not very high. However, it is important to note that he has a high-quality adapter with a capacitor. The conductivity of the diode is at least 5 microns. Problems with the format of the RK should not arise. In stores, this receiver the user is able to buy for 5800 rubles.
Features of Belkin devices
This receiver is well suited for music centers with PP output. If you believe the experts, then the adapter for it is selected quite high quality. The expander in the device uses a single-channel type. There is no RAS output in this case. It is also worth noting that the model has a high sensitivity parameter. The receiver overload is only 30 A.
The system of protection against magnetic oscillations in this case is absent. The voltage of the unit is not more than 5.4 V. The modification copes with overloads from the adapter not bad. The bluetooth music receiver of this series costs about 5700 rubles.
Yamaha 1010 receiver specifications
This bluetooth speaker receiver is famous for its high-quality capacitor. According to customers, the model is allowed to be connected to consoles. The data transmission range is not more than 80 meters. The antenna of the modification is used of the built-in type, and it is installed in the upper part of the structure. The intermediate frequency of the device is 520 MHz.
The system of protection against magnetic oscillations is used in the third class. The audio output of the PAC for the modification has only one. Connecting wired connectors to the model is allowed. However, it is important to note that the body of the device does not tolerate high humidity. The demodulation coefficient is not more than 90%. The video output of the spacecraft in this case is. The price of this bluetooth music receiver ranges around 7700 rubles.
Customer Reviews for Models Gemix BT-12
This bluetooth receiver (audio bridge) for consoles is in great demand. First of all, it is important to mention the high sensitivity of the device. The receiver has a RC output. The device copes with magnetic vibrations not bad. However, there are also disadvantages. The throughput of the receiver is significantly underestimated. For first-generation consoles, the device is not suitable.
If you believe the expert reviews, the RCC model supports the format. The equipment overload indicator is at around 33 A. The harmonic interference protection system will be applied in the third class. Smartphones "Android" this model supports. However, it is important to note that the manufacturer does not provide compatibility with the format KR20. When transmitting multi-threaded data, long delays occur. The model is also not cheap, and in the store they sell it for 8,200 rubles.
Features of the Gemix BT-30 devices
This bluetooth headphone receiver has many advantages. Buyers praise the device for simplicity. This adapter supports standard adapter functions. To connect the music center, the RA output is used.
It is also worth noting that the model supports the P30 format. With harmonic oscillations, problems are quite rare. The device cannot be used to connect consoles. The system of protection against magnetic oscillations is used in the third class. The intermediate modification frequency is at around 380 MHz. If you trust the expert reviews, the modulation process of this receiver does not take much time. Transients in the expander do not take much time, and the response rate is not more than 4 ms.
PK40 format model supports. Connectors can be connected to various types. It is especially important to mention the high-quality retractable antenna, which copes well with signal reception. The capacitor of the modification uses a dipole type. The price of the specified device in stores starts at 6400 rubles.
Characteristics of BM10 Receivers
The BM10 Bluetooth receiver has the following indicators: nominal voltage 3.5 A, demodulation coefficient 68%, input sensitivity is 10 mV. Overloads in the device are allowed up to 20 A. The receiver has no harmonic protection system. It is especially important to note that the model has a dipole type adapter.
The expander for it is matched with two filters. Thus, the range in the device is high, and is as much as 120 meters. The receiver case is made of plastic. The antenna for the modification is used as a built-in type. The intermediate frequency of the device is 380 MHz. RA output in this case is supported by equipment. Receivers in the markets are approximately 8800 rubles.