Car radio units are sold with detailed connection instructions. However, getting confused in them is quite simple. In this case, you must consider the type of adapter that is installed in the machine. Many experts recommend strictly adhering to the wiring diagram. Otherwise, the car radio can be irrevocably ruined. First of all, you should familiarize yourself with the main types of devices.
Connecting DVD models
The connection diagram for the specified type of car radio involves the use of straight through adapters with two connectors. As a rule, manufacturers do not use an extension cord for the subwoofer. In this case, the installation of the device should begin by connecting the stereo unit. To do this, carefully inspect the adapter. Many models are made with linear outputs. In this case, the connection is via a contact conductor. However, it is important to note that there are devices with coaxial outputs on the market.
An adapter with a receiver is selected for them. The front speakers are connected via blue wires. The rear speakers can be connected via an adapter or a double adapter. Various extension cords are used to connect the subwoofer. In some cases, they can be installed with insulators. A fuse is used to protect the stereo unit. The output for the battery is usually indicated in red.
CD / MP3 device installation diagram
The connection diagram of the specified type of car radio has two adapters. If we consider the standard model, then it is sold with two-way adapters. Each of them has several line outputs. A receiver is used to connect the stereo unit. Contacts to it are led with blue connectors.
The front speakers can be connected through an adapter or contactor. In this case, much depends on the manufacturer. The rear speakers use a standard two-way adapter. Extension cords are rarely used on models. The connection diagram of the subwoofer to the car radio involves the use of a controller. It usually has a blue connector.
Connection with retractable display
The connection diagram of the car radio with retractable displays involves the use of adapters for three contacts. In this case, the stereo unit is connected to the adapter directly. Adapters in devices are used with fuses. In some cases, adapters are installed with insulators. A receiver is required to connect the stereo unit. The adapter in this case is used with a linear output. A two-way adapter is used to power the system. Some models have dual contactors. They are connected to the system through an extension cord.
Installing the Pioneer MVH-07UB radio
The connection diagram of the Pioneer car radio cannot do without an adapter and adapters. The controller in this case is applied in a modular type. If we consider a circuit with a single-channel adapter, then the adapter is allowed to be connected through a fuse. To do this, the panel has a blue connector.
In some cases, the adapter for connecting the car radio is used with a fuse. For such vehicles, a contactor is required. First of all, a blue conductor is taken to connect the speakers. The amplifier is used only under the subwoofer. In some cases, a Pioneer car radio with rear speakers is connected via a dual adapter.
Connecting the Pioneer MVH-12UB to a subwoofer and speakers
The connection diagram of the Pioneer car radio requires an adapter and two contact-type adapters. To connect the stereo unit, you must use the controller. In this case, the fuse is installed last. The front speakers are connected via a line output. In this model, it is painted red.
In order for the Pioneer car radio to not malfunction, you need to check the insulators. The rear speakers can only be connected after the subwoofer. A blue adapter is used for this. It has coaxial connectors. Red wires are connected to the rear speakers.
Pioneer MVH-15UB Connection Diagram
The Pioneer car radio connection diagram involves the use of a one-way adapter. The stereo unit in this case is connected quite simply. An adapter for this is used on two connectors. There are green wires for connecting the front speakers. The model’s subwoofer can only be connected through an adapter. In this case, the fuse is used without a receiver. In order for the system to work without failures, it is very important to check the condition of the insulators. Connecting to the battery connector last.
Installation of the Sony XAV-601 radio tape recorder
The connection diagram of the Sony car radio involves the use of a simple adapter adapter. In total, the model has three outputs. In this case, the stereo unit is equipped with three linear connectors. A fuse is used to protect the device. An extension cord is required to connect it. In some cases, an additional insulator is installed.
However, it is important to note that it is not included in the standard kit. The front speakers in the device can only be connected through gray conductors. In this case, the subwoofer is connected without an extension cord. In order to avoid cases of short circuit, insulators are used. The rear speakers of the car are connected to the system last. The left speaker is connected to the blue wire of the second adapter. A red connector is provided for the right speaker.
Connecting the Sony XAV-603 to a subwoofer and speakers
The connection diagram of this type of car radio requires two adapters and one adapter. For a high-quality installation of the device, it is first of all important to tackle the stereo unit. In total, it has two line outputs. They are necessary for connecting adapters. The adapter is connected to the system only through an extension cord. In this case, the fuse is standardly used with a contactor. After connecting the stereo unit, you should take up the subwoofer.
To do everything efficiently, you will need two isolators. The wires to the subwoofer are blue. In this case, an extension cord is not required. To solve problems with high humidity, pads are used. All connectors must be clean. After connecting the subwoofer, you can start connecting the front speakers. This is pretty easy to do. The adapter in this case is required with a coaxial output. A yellow wire is connected to the left speaker.
There is a blue output on the right column. In this case, the wire is used in the appropriate color. The rear speakers, according to the standard scheme, are connected through a second adapter. The connectors on it should be painted green. The left speaker is connected through a red wire. On the right column you can see the blue connector. In this case, the wire is selected from the adapter of the corresponding color.
Sony XAV-605 Connection Diagram
The car radio connection diagram has two adapters. In this case, they must be a contact type. The stereo unit of the car radio is made with coaxial connectors. To properly install the device, you must first take the adapter. In total, six wires depart from it. The model controller is used without a receiver.
A blue wire is used to connect the stereo unit. The battery connector can be accessed through the red socket, but in this case the wire is used with an insulator. A fuse is required to protect the system. He must be together with the stereo unit. After installing the subwoofer, you just have to connect the speakers.
Installing the Digital DCA-115: expert advice
The connection diagram of the specified model of the radio implies the presence of feed-through adapters and three adapters. The fuse in this case is used with the controller. You can connect the device immediately through the stereo unit. Also, installation is allowed to start by connecting speakers.
If you select the first option, the adapter is used with a linear output. In this case, a red wire is supplied to the stereo unit. The front speakers are connected through the controller. The extension cord should not be used. A red wire is taken on the left speaker. There is a blue connector on the right speaker. To connect it, a wire of the corresponding color is used.
Digital DCA-122 model reviews
These car radios can easily be connected through a conventional adapter. It is used as standard with contact type adapters. An extension cord is required to connect the stereo unit. It moves away from the linear connector. You can recognize it by color (blue output). A two-way adapter is used to connect the front speakers. In total, he has two line outputs. First of all, it should be noted that the left column is connected through the red wire. The right speaker of the model has a blue connector. A wire of the corresponding color is used for it.
Then it remains to connect the subwoofer. An extension cord is used for this from the first adapter. In this case, the wire moves away from the coaxial output. According to experts, the isolator from the subwoofer is installed last. It is also important to note that the conductor must be connected to the fuse. The circuit for connecting the amplifier to the car radio has two contactors and only one adapter.
Installation of the JVC KW-SD70 radio
The JVC car radio connection scheme involves the use of two-period contactors. In this case, there are three adapters. Fuses in the model are included with the receiver. The installation of a radio tape recorder of the specified manufacturer should begin with the stereo unit. First of all, a wired type adapter is taken. It has three small linear connectors. They are used to connect speakers. In this case, the adapter must be used with blue connectors.
If you believe the reviews of experts, it is more advisable to install a fuse last. In some cases, the adapter is fixed with insulators. The stereo unit must be installed near the contactor. A standard adapter with coaxial outputs is used to connect the front side speakers. In this case, the wires are gray.
A transient adapter is used to connect the rear speakers. The insulators in this case should move away from the line connectors. The left rear speaker is connected through the red conductor. There is a green output on the right speaker. Therefore, the wire should use the appropriate color.