Data collection terminals are portable devices that are able to quickly read information from goods. Most often they are used in shops, industrial enterprises and warehouses. When accepting a new product or inventory, the terminals are indispensable. There are many manufacturers on the market, so it’s quite difficult to immediately choose a good model.
How to choose a terminal?
If you look at a universal data collection terminal, then the reading speed should be at least 70 scans per second. It is also important to pay attention to the functional part of the model. In particular, the sound notification option should be included in it. Some models adjust the volume and font of the text. Processors are installed at different frequencies. When processing a large amount of information, it is important to remember the size of the memory. On average, the specified parameter fluctuates around 4.5 MB.
If you select a device for a large store, then the type of supported codes is taken into account first of all. In this case, much depends on the manufacturer. Batteries for powering the device are installed mainly lithium type. Their average capacity does not exceed 500 mAh. The minimum allowable temperature for the terminals is -13 degrees. Compact models on the market weigh around 250 g. The user is able to purchase a high-quality data collection terminal for a warehouse with a monochrome display at a price of 40 thousand rubles.
Low Accuracy Devices
Low accuracy scanning terminals are not suitable for large stores. Many models have 32-bit processors. On average, the device’s memory does not exceed 4.2 MB. Many models are made without speakers. In this case, the beam width cannot be adjusted. Reading speed is not more than 50 scans per second. Barcodes can be read up to a distance of 30 mm.
It is also important to note that the minimum allowable temperature for data collection devices is not lower than -15 degrees. Models with IP20 protection system are afraid of high humidity. Nowadays, there is a terminal for collecting data of this type in the region of 30 thousand rubles.
High Accuracy Scanning Terminals
High accuracy data acquisition devices are well-suited for large enterprise inventory. In this case, the models are capable of boasting a high speed of reading information. Some terminals are made with connectors for connecting to personal computers. Scanners are directly used laser type, with the ability to change the width of the active field. The display system depends on the manufacturer. There are high-quality data acquisition devices with high scanning accuracy in the region of 55,200 rubles.
Terminal "Symbol"
For base 1C, the Simbol data collection terminal is manufactured with a powerful processor. It is also important to mention that it has 4.5 MB of memory. The maximum resolution the user is able to set at 340 by 230 pixels. If necessary, the font color on the display can be changed. The minimum reading distance is 10 mm. The display is set in monochrome, and the text on it can be seen quite clearly.
If we talk about the shortcomings, it is important to mention the low capacity of the battery. The maximum scanning width is 300 mm. The interface for data management is provided by the Bluetooth 1.2 series. The maximum allowable temperature for the data acquisition device is 40 degrees. In terms of dimensions, the terminal is quite compact and weighs only 236 g. The case is not protected against falls from it. It is also important to note that he is afraid of high humidity. The kit includes a battery and the data collection terminal itself. An instruction is also attached to it. There is a device on the market about 43 thousand rubles.
Description of the device "Casio"
This TSD (data collection terminal) is compact and versatile. For warehouses and inventory, the model is used quite often. In large enterprises, the device is also valued for its reliable protection system. The display is installed with an acceptable resolution, and the information on it is clearly visible. If necessary, the font color can be changed. The system is capable of handling E8 and E128 codes. The minimum allowable temperature of this data collection device is -14 degrees.
In total, there are two lithium-ion batteries in the kit. The scanner in this case is at an angle of 25 degrees, so using the device is very convenient. The interface for data management is used by the standard Bluetooth 1.2 series. Unfortunately, there is no sound notification function when scanning in the model. This data collection terminal is for sale at a price of 44 thousand rubles.
Honeywell device
This TSD (data collection terminal) is used in small enterprises. The accuracy of reading the code is low. It is also important to note that there is no way to adjust the beam width. The scanner itself is located at an angle of 15 degrees. The processor is used low power. However, it is enough to provide an average reading speed of 60 scans per second.
In this case, there is only 2 MB of memory. By design, this data reader is simple. It weighs 275 g. The system supports all major codes. The font size in this case cannot be changed. Reading width is 230 mm. This device for data collection in the store is on sale for 38 thousand rubles.
Parameters of the model "Motorola MC9190"
Motorola MC9190 data acquisition terminal is suitable for storage facilities. The maximum allowable resolution is 430 by 280 pixels. In this case, the beam width cannot be adjusted. However, the model has quite a few advantages. First of all, a powerful processor deserves attention. With its help, the reading speed exceeds 70 scans per second. It is also important to mention the presence of a speaker.
Codes E8 E20 system supports. In total, the standard set has two batteries. Enough of them for about ten hours of continuous operation of the terminal. If necessary, the user can modify the data table. The scanner is laser type. The maximum allowable temperature of this data acquisition device is 45 degrees. The protection system is used by IP50. At a distance of 30 mm, the data reading width is 200 mm. Indication system applied diode type. You can purchase the specified device for data collection for only 38 thousand rubles.
Features of the Cipherlab Model
Cipherlab data collection terminal is in great demand. The processor in it is used at 62 bits. If necessary, the user can change the data table. It is also possible to select the font size and color. There is no sound alert function when scanning. Indication system used diode type. In total, there are two batteries. The reading speed of this data acquisition device is 75 scans per second. This model is for sale at a price of 43 thousand rubles.
Description of the device Argox PT2010
This data collection terminal is used in enterprises with large turnover. First of all, it is important to note that the model supports all international product codes. The read speed of the modification does not exceed 78 scans per second. If necessary, the display resolution can be changed. The scanner in the data acquisition device is located at an angle of 15 degrees.
In terms of dimensions, the model is compact and holds in the hand remarkably. Batteries are used lithium-ion type. When fully charged, they last for about seven hours of terminal operation. The specified device is sold at a price of 41 thousand rubles.
Parameters of Intermec C30
This data collection device is useful for inventory. The scan width in this case is adjustable. It is also important to note that the model has a high-quality monochrome display. If we talk about the shortcomings, then we must mention the small angle of the scanner. Sometimes they are uncomfortable to use. Indication system installed as standard. The model has a sound alert function. In total, the device uses two speakers. There is only one battery in the standard kit. You can buy this device for data collection at a price of 47 thousand rubles.
Opticon Smart Terminal
The Opticon Smart data acquisition terminal has high resolution and is compact. If we talk about the parameters of the model, it is important to note that the memory provides 4.6 MB, and the processor is set to 62 bits. The display is in monochrome and the backlight is quite bright. The code reading width is 310 mm. Speakers in this case are not provided by the manufacturer.
The case is made of plastic and is able to withstand a drop from a height of 1.3 meters. The minimum allowable temperature of the presented device for data collection is -13 degrees. The model is afraid of high humidity. It is also important to note that she uses only one battery, and her capacity is only 430 mAh. When fully charged, it lasts about two hours. You can buy an Opticon Smart data collection terminal for 34 500 rubles.
What is the result?
Given all of the above, it should be noted that among the budget models, you should definitely pay attention to the “Honorable”. The specified terminal makes it easy to configure the input information. It also supports all major types of codes. The frequency of the processor allows you to process data at high speed.
If we talk about a more powerful terminal, it is important to mention the "Casio". It is quite expensive, but it stands out among other models in high resolution. It should also be noted that the user is able to very accurately control the beam of the device.