How to program the remote control from the gate, the principle of operation

Today on the world market there are many manufacturers who are engaged in automation. You need to be able to program it correctly so that the necessary technologies work well and correctly.

Now we will consider the remote control from the gate. If you fine tune them, you will protect yourself from intruders and make your life much more comfortable. You can also use the keychain not only to open the gate, but also for other appliances. Let's look at how to program the remote control from the gate.

CAME remotes

This company occupies a leading position in the production of universal remotes. They withstand various climatic conditions and are easy to program.

TOP-432NA

CAME is today considered the highest quality and most reliable. At her you can find many good remotes. According to consumers, the highest quality model is TOP-432NA. What is the reason for this? This remote control is two-channel, which allows you to work with several devices at once, namely it is possible to open several devices at once, for example, gates and barriers. Its frequency is 433.92 MHz. This model is capable of working at a fairly large distance - 140 meters. How to program the remote control from the gate CAME?

1. At the first stage, you must close the remote control to the gate.
2. Next, you need to press 2 buttons. Hold them until the indicator light starts flashing.
3. After that, click on any button, only you need to choose which one will be used for the gate. If the indicator starts to burn evenly and stops blinking, then you did everything right.
4. We take the old remote that came with the gate, and click on the button to rewrite the code. It should be remembered that everything must be done quickly while the light on the CAME remote control is on.
5. When the indicator on the new remote control blinks several times, the dubbing will end. Now you can use it to work with the gate.

Four-channel TOP-434NA

This remote is similar to the first model. The only difference is the size and number of devices that can be programmed. The frequency remains the same. TOP-434NA - remote control from the gate. How to program it?

1. As in the first case, you need to bring the remote control to the gate and press two keys simultaneously. We wait until the LED lights up.
2. Click on one of the buttons to start recording on it.
3. Next, press the button on the special remote control to rewrite the code.
4. After the indicator blinks 3 times, you can start using this remote control. The data was successfully overwritten.

TOP-432EE

Recently there was a new keychain from the TOP series - TOP-432. It can allows you to work with devices for the programming of which various encodings were used, such as TAM and TOR. To start working with this remote control:

1. You must click on the new key fob the key that you want to use in the future to work with the gate. We wait until blinking appears on the indicator, and release the button.
2. Repeat clicking on this button.
3. After completing the steps, you need to quickly bring the old remote to the TOP-432EE. We press on it a key that allows you to open the gate. When the LED blinks 3 times, you can start using the device for its intended purpose.

TOP-432EV

This remote control is considered an improved version of the previous model. It has a fairly small size, which allows you to carry it in your pocket. TOP-432EV may also contain 4096 code operations. How to program this keychain?

1. As before, we hold down two keys until you see a blinking light bulb. Next, release them and move on to the next action.
2. Select the button on which the data will be moved.
3. We wait a few seconds until the LED lights up continuously.
4. We bring the new remote control to the bottom of another remote control and wait for the dubbing to be performed. This usually takes about 10-20 seconds. When the LED flashes 3 times, you can be sure that the recording has completed successfully.

Came twin

Another novelty is the Came Twin keychain. It has one feature - code protection. Outsiders will not be able to so easily get the code to open your gate. They are also available in various variations - on two and four buttons. Came Twin is able to work with dynamic code. How to program the remote control from the gate?

1. First you need to make sure that this keychain can already be used and it has a button for receiving a signal.
2. We bring the remote control as close to the receiver as possible.
3. Next, take the old keychain and press the key where the necessary code is recorded. We wait until the LED lights up.
4. After 10 seconds, click on the button that is on the old remote control.
5. After about 20 seconds, the code writing process will end.

Nice company

The Italian company Nice is in the top for the production of automated systems for various equipment. Their products are quite high quality and reliable. Of course, they have universal remotes that allow you to control some processes at the same time. How to program remote controls from the Nice gate?

Nice FLO and FLOR

Nice keyfobs are fairly easy to program. All models of the FLO and FLOR line can work with dynamic code at a frequency of 433.92 MHz. They can work even if they are located at a distance of 140 meters from the desired object. Remote control release with one, two or four keys. Let's look at an example of how to program the remote control from the Nice FLO2R gate.

1. First you should go to the receiver.
2. It is necessary to arrange the consoles in series.
3. Next, select the key to write the code and click on it.
4. After 5 seconds, you can press the button that is used to open the gate on the old remote control.
5. It remains only to repeat the keystroke on the first remote control. Button programming completed.

Hormann

This is a German company that relies on quality. Its products are quite reliable and beautiful. The manufacturer paints the various buttons in different colors to determine specific frequencies for them (blue - 868 MHz, green - 26.975 MHz, gray - 40 MHz).

Hormann HSM 4

This model is equipped with four buttons that allow you to control various equipment. Hormann HSM 4 has a frequency of 868 MHz and the ability to use dynamic code. You can also note the rather small size of the keyring. How to program the remote control from the gate Hormann HSM 4?

1. We place a new remote control not far from the old one.
2. After that it is necessary to press the key with which the reading will be performed. We wait until the light comes on.
3. Next, you need to press the key, which you need to use in the future. After 5 seconds, the LED will flash rapidly. Code transfer completed.

Hormann HSE2 and HSM

HSE2 has a two-channel mode of operation, and HSM has two and four-channel modes. It has a small size, which allows you to cling it to the keys. The first model operates at a frequency of 868 MHz, and the second - 40.680 MHz. To program them:

1. First you need to place the remotes close to each other.
2. We take the old keychain and press the key with which to read the data.
3. Next, press the key that you select for use in the new remote.
4. It remains only to wait for the LED to blink. We release the keys and we can begin to operate this remote control.

Doorhan

Doorhan is a Russian company. It has long entered the world market and supplies high-quality equipment for automating work with gates and radios.

Doorhan Transmitter 2, Transmitter 4

These models work with a dynamic code at a frequency of 433 MHz. As you already noticed from the name, the key rings can work with 2 or 4 different devices. How to program the remote control from the doorhan gate?

1. First you need to delete the old entries. To do this, click on the key with which you can record, and wait. After 15 seconds everything will be deleted.
2. Next, you need to press the SW1 button (or any other that you need to program) and on the old key fob to record data. We are waiting for a few seconds.
3. This is the end of the recording. You can start using it.

BFT Company

The most common remotes of this company are BFT Mitto 2-12, BFT Mitto 4-12. They are two and four channel, respectively. Able to operate at a frequency of 433.92 MHz. How to program the remote control from the BFT gate?

1. To transfer data, press the OK key.
2. Next, go to the PARAMETER item and press the “-” button a couple of times.
3. Repeat clicking OK. After that, you will find yourself in the menu where you can add the device.
4. Click on the AD start key and click on the necessary button.
5. Next, click on the appropriate key in the old keychain and wait until the data is overwritten.

Faac

This is a fairly popular Italian company. Its products are used in many countries of the world.

Faac XT2-868 SLH and XT4-868 SLH

These models are used to control two or four devices. XT2-868 SLH and XT4-868 SLH operate at a frequency of 868 and 35 MHz, respectively. They can also be used in various climatic conditions. How to program the remote control from the Faac gate?

1. First you need to simultaneously press the buttons P1 and P2 to program the key fob.
2. Next, you need to place the remotes together.
3. As soon as the LED starts to light, you need to hold down the key on the old device, which will be used in the recording.
4. In the new remote control, select the Slave button. After 15 seconds, recording ends. Then you can start using this remote control.

Conclusion

Today you can program the considered remotes for many devices. How to program the remote control from the gate? As you may have noticed, this is done quite simply. In many remotes, the actions are very similar. To everything went well, follow the instructions. You can choose a remote control of any company, which you like best. Of course, you should choose the right frequency. This will be an important parameter when choosing a remote control.