MMS service is no less popular than sending text messages. Each person may sometimes need to send a picture to another subscriber, for example, to share his impressions from the rest. Modern gadgets, as a rule, automatically configure the Internet and MMS immediately after a SIM card appears in the device’s slot. In some cases, when this does not happen, you have to query the settings or register them manually in the appropriate paragraph on the phone. How to automatically configure MMS on "Tele2"? When may you need to manually configure the device to receive and send multimedia messages?
Getting Settings: General Description
As mentioned earlier, the sending of settings is initiated automatically by the system as soon as the SIM card is registered on the network. The process of accepting these parameters is performed on the client side (by storing them in the device). In fact, in order to start using the MMS service, you just need to save the settings received from the operator in the form of a text message. However, not all subscribers accept the sent parameters on time. For example, a person purchased a new gadget, inserted a SIM card into it, and immediately received several text messages, including MMS settings. Most likely, a person will ignore such notifications, since he currently does not have a need for this service. But in the future, he may have a fair question about how to connect and configure MMS on Tele2.
Request MMC parameters
If the client of an alternative mobile operator had to find himself in a similar situation, then there are several ways to get out of it:
- Carry out a request for auto-settings through the operator’s service;
- perform a similar operation through the web interface of your personal account;
- register settings on your device yourself.
Attention! You should enter the data correctly if you are puzzled by the question of how to configure MMS on Tele2. Detailed instructions with recommendations are available on the official resource of the operator. Later in this article, we will also tell you how you can configure yourself.
How to automatically configure MMS on "Tele2"
If the option of manually entering the connection parameters is not interesting to the subscriber and he faced the question of ordering auto settings for MMS, we recommend using the voice service to receive them.
To receive and apply the parameters necessary for using the MMS service on your mobile device, dial 679 (the connection is free, as well as receiving settings). After contacting this number, the subscriber from whose device the request was made will receive a text message. After that, a person will just need to click the “Save” button on the smartphone’s display.
If you check with the contact center operator how to set up MMS on Tele2 automatically, he will also recommend that you order parameters for connecting through your personal account.
When manual tuning may be needed
The intervention of the subscriber and the need for self-tuning can arise in the following cases:
- settings sent by the operator were not “received” by the device;
- when installing the SIM card, no settings were received;
- the received settings message was deleted.
Sometimes the inability to send a multimedia message may be due to the fact that this service is simply turned off on the number. Despite the fact that it is basic and available on all SIM cards by default, the subscriber himself could disconnect it earlier. In this case, you must first be puzzled by how to connect the MMS to “Tele 2”. How to manually configure the settings on your gadget, read on. Below we will talk about how to set the necessary parameters in the device menu.
We write down the parameters for the MMS service on devices running on the Android OS
So, if you use the gadget on “Android ” and you have failed to figure out how to automatically configure MMS on “Tele2” yourself, then it's time to manually set the necessary parameters.
In the settings of the device, you should find the section for mobile networks. Add an additional access point here. In the parameters requested for it, enter the data:
- The address of the home page is mmsc.tele2.ru (a similar value should be entered in the field “Access Point (APN)” - mms.tele2.ru).
- The type of access point is mms.
- Proxy - 12.19.12.40.65.
- MCC - 250.
- MNC - 20.
The values ​​for the login and password fields are not required.
Set up services for iPhone
For owners of apple devices, the procedure for entering parameters is not much different from that considered previously.
Add should be an MMS proxy - 193.12.40.65:8080, APN MMSC (similarly, as on "Android" devices).
After the parameters specified earlier are registered on the device, you should restart it - this is done so that the settings take effect. Before proceeding with the procedure for entering parameters into the appropriate menu of the device, it is recommended that you try auto-tuning nevertheless (we told you how to automatically configure MMS on Tele2).
Another recommendation after successful setup is to send a test multimedia message to any number, even to your own. This is necessary in order to register a device with the entered settings on the network - this will allow to receive similar messages from other subscribers in their standard form on their device in the future, and not as a link to the MMS gallery.