The company "Starline" is a popular brand that produces anti-theft systems for various cars. When developing protection algorithms, modern innovative technologies are used. Thanks to this, it is possible to ensure high reliability of car alarms. Therefore, many domestic drivers install Starline on their car . How to enable autorun, describes the instructions in detail. However, this process is not always understood by drivers to the end.
Experienced auto mechanics give advice on how to configure the most basic and necessary functions of this system. When using them, driving will be comfortable and safe.
Manufacturer
The domestic brand “Starline” today presents a variety of alarm systems to the anti-theft market. When creating them, the most modern technologies are used. Thanks to this, a high-quality, high-tech Starline alarm is obtained . How to enable autorun, the driver is primarily interested. After all, this function significantly increases the comfort of using the car.
The Starline company bases its systems on the advanced achievements of telematics. Thanks to this, it turns out to create a system that is not subject to temperature changes, fully adapted to the conditions of domestic roads. Also, the advantage of the presented product is a low level of interference.
Due to such features, the presented product is recommended to be used by large engineering companies Chevrolet, Citroen, VAZ, Peugeot, Opel, etc. For almost any vehicle, you can choose the right system.
general characteristics
The presented brand today produces many modifications of anti-theft systems. One of the most popular is Starline A91, B9, as well as Starline A61. How to enable autorun , the instructions disclose in detail. However, far from always the driver can understand the confusing manual. Therefore, experts give advice on how to conduct this process.
The equipment of the domestic brand has a two-way communication channel between the car and the user's keychain. This greatly simplifies the process of setting up and managing the system. A special encoding of the signal completely eliminates the possibility of cracking messages. Its transmission range can reach 1800 m in open areas.
The dynamic principle underlies the encoding of the signal. The driver is notified through various sound and vibration signals. About 300 car models allow the installation of the equipment presented. They can have almost any type of gearbox, as well as a diesel, gasoline and turbocharged engine type.
Operational Features
Starline A91, A61, Starline B9 systems possess high quality equipment . How to enable autorun will be presented later. First of all, it is necessary to determine the basic requirements for the operation of the system. In this case, it will work reliably and fully.
Installation of all elements of the equipment presented must be performed by experienced professionals. In this case, the probability of an error is excluded. An inexperienced installer may violate the manufacturer’s requirements. In this case, there is a likelihood of incorrect operation of the alarm, its lack of security.
Only when all installation requirements are met, does the manufacturer guarantee a uninterrupted operation of the system. It will be impossible to crack the encoding. The signal is transmitted over 128 channels via radio. At the same time, the software manages more than 60 teams. The system is operated in the temperature range from -45 to +85 º, fully adapted to the adverse conditions of domestic roads.
System management
When considering how to enable Starline autorun , you should carefully study the instruction manual. Experts claim that the equipment presented is reliable, durable. It rarely crashes (subject to proper installation and operation), effectively protects the car from breaking.
The system includes the ability to change settings in accordance with the requirements of the user. This greatly increases the comfort of its use. Settings are easily changed by means of trinkets that come with the equipment. They may or may not have an LCD display. In the first embodiment, the exchange of information between the on-board computer and the user is easier.
The alarm system is Russified, which facilitates the settings. Using the keychain is very simple. In total, the control unit can write 4 control devices to its memory. Then you can proceed to the settings.
Remote controller
Studying the issue of how to turn on the autostart of the Starline engine , you need to understand the features of the application of the remote controls. It is with the help of these remotes that you can configure almost any function of the security system. A keychain with a screen is best suited for these purposes. Push-button varieties to make such settings will be much more difficult. If for some reason the keychain with the display is out of order, it can be purchased at a specialized store and stored in the computer's memory.
Such a remote control has in addition to the screen three buttons. Each of them is responsible for a specific function. The most popular keychain commands among motorists are the inclusion of a security program and autostart. Managing an on-board computer is simple, even without being near your car.
The keychain comes with a battery. It is not installed inside the remote control. First, the battery must be put in its intended place. Next, the keychain is turned on. The user can proceed with the settings.
Buttons
When considering how to enable Starline autostart, you should start by controlling the remote control. It includes 3 buttons. All settings are performed with their help.
The first control button is responsible for enabling various program commands. It should be pressed 1 time. If the I button is clamped and held in this position, the system will turn on (or turn off) the engine. If the motor is on, holding the I button for 3 seconds will allow the system to enter the armed mode.
Button II is responsible for the cursor that moves around the screen. Its movement is carried out by quick pressing. If button II is held for a certain time, the trunk lock will open. Button III moves the cursor in the opposite direction. She is responsible for turning off the sound of the key fob. If you hold it pressed for a long time, you can program the time indicators and turn on the system energy saving.
Safety operation
Before you enable Starline autorun, it is recommended that you study the safety rules when using the presented security program. All requirements are presented in the instructions.
High signal range can only be achieved in open space. In this case, the car must be put on the handbrake. The transmission of a manual gearbox is brought into a neutral state. Automatic transmission is fixed in the parking position.
All machine systems at the time of the settings must be fully operational. The system must have a sufficient amount of lubricant and fuel. If the autostart function is activated, there should not be any objects in the immediate vicinity of the car. Leave the keychain in a place where children cannot reach.
Add devices to computer memory
Before starting autostart, the Starline alarm must be properly configured. If the vehicle that the user purchased was already in use, be sure to overwrite the key fobs in the computer's memory. Also, a similar procedure will be required if there is no reaction of the control unit to the signals that the user sends from the remote control.
All existing key fobs are tied to the system at the same time. The driver must first shut off the engine. After that you will need to find the Valet system button in the car. Its location is indicated by the instructions of the vehicle manufacturer. The button must be pressed seven times.
After carrying out the presented manipulations, you can turn on the ignition of the car. The system emits seven beeps. She activated the programming mode. All existing installations are factory-installed.
Buttons III and II should be pressed simultaneously. Then a characteristic signal will sound again. This means that the remote control has been entered into the computer's memory. The remaining trinkets are tied to the control unit in a similar way. The interval between each subsequent action should not be more than 5 seconds. After carrying out such manipulations, the ignition is turned off.
Time setting
Studying technology regarding how to enable Starline autostart on time, you first need to know how to configure this system. To do this, use the keychain. It will help to set real-time parameters of the system. A simple configuration scheme is used for this.
The third button is clamped on the keychain. By pressing it, the hour indicator is set. After pressing the button, their designation flashes on the display. The first button will decrease the number of hours. The second button can increase their value. Then, the minutes are set using a similar system.
Autorun time setting
First of all, drivers are interested in how to enable Starline autorun. For this, you will also need to use the remote control. This program allows you to enhance the comfort of using the system. After a set period of time, the program will start the engine. This allows you to warm up the car according to a certain scheme.
With how to enable Starline autorun on a timer, the advice of experienced auto mechanics will help you figure it out. The presented function allows you to start the motor with an interval of every two, three, four hours, as well as once a day. The program can control the operation of the motor and turn it on from a distance.
To activate the program, hold down the button III of the remote control. The remote will emit one beep. The button is not released. The cursor must be moved to the corresponding screen icon. It looks like a fan blade. Next, the I button is briefly pressed. After 10 seconds, the program will be activated.
Auto start by temperature
Also, many users of the system are interested in how to enable Starline autorun by temperature. In winter, this is a very convenient program. The temperature overboard is measured by a special sensor.
The motor can be switched on at a temperature of -25, -5, -18, -10 º. The duration of his work can be 10 or 5 minutes. The program is activated by pressing the third button. After the second beep, the third icon in the row is selected. If its activation is successful, a temperature icon will appear in place of the watch.
Having considered how to enable Starline autostart, each user will be able to configure the system independently.