In places where cabling using Ethernet and FTTx technologies is difficult or impractical, Rostelecom uses existing telephone lines to provide Internet access to consumers. In this case, users need to purchase a special device (modem) that matches the digital circuits of the computer with the analog encoded signal of the ADSL provider. If a consumer creates a local network, it will require the purchase of a separate router (router).
TP Link TD W8151N combines the functions of both devices. He is the best alternative in this case. Using the recommendations set forth in the article, the owner of the modem router will be able to independently install, connect and configure TP Link TD W8151N Rostelecom.
The appearance of the router
The body of the product is made of white plastic with a large number of decorative holes for natural ventilation.
The front panel is occupied by a line of illuminated icons informing the user about turning on the router, connecting to the provider via the ADSL line, working on the Internet, the status of the WI-FI module, and the operation of the secure WPS synchronization mode.
On the rear panel there is a WAN port connector (RJ-11 type) for connecting to the Rostelecom provider line and a LAN port connector (RJ-45 type) for connecting a desktop computer (PC). There is also a socket for connecting the power supply and a POWER button to turn it on (ON / OFF). Nearby are the buttons for turning on the WI-FI module, secure connection to a wireless network (WPS), and resetting tinctures to factory settings (RESET).
The non-removable antenna of the WI-FI range has a hinge mechanism that allows you to orient it in different planes.
Contents of delivery
In the case of purchasing a router in a distribution network, before installing and connecting the product, the user must check the initial configuration. The basic package includes:
- TP Link TD W8151N router
- AC adapter "9V 0.6A";
- a splitter dividing the input telephone line into 2 separate connectors;
- 2 cables with RJ-11 connectors for connecting a telephone and a router to a splitter;
- a cable (patch cord) with RJ-45 connectors for connecting a computer to a router;
- set of documentation.
Before connecting equipment for organizing a home local area network, the user should carefully read the materials set forth in the attached documentation.
Equipment connection
The installation location of the router should be selected in advance, taking into account the proximity of AC outlets to the room, to achieve the maximum coverage area of the wireless network zone. On the splitter case are marked the connectors for connecting the ADSL lines of the provider, the telephone and the WAN port of the router with the cables supplied.
The LAN port connector of the router with the supplied cable is connected to the RJ-45 configuration connector of the computer (PC). Lastly, the power adapter is connected to the plug connector of the router and the POWER button is pressed to the ON position. After the alarm indicator on the front panel lights up, the router is ready to configure.
Preliminary work
Before configuring the TP Link TD W8151N router, the network card of the computer connected to its LAN port must have a specific configuration. It must be configured to automatically obtain IP addresses and a DNS server. To check, you need to right-click on the image of its cable connection with the router on the computer’s connection page and open the “Properties” item in the drop-down menu.
In the new window, you need to select the TCP / IPv4 protocol and in its properties check the installation of "checkboxes" in the columns for obtaining addresses automatically. If the requirement is not met, you must do this manually and confirm the action by pressing the OK key.
Login to the router interface
The configuration of the TP Link TD W8151N Rostelecom modem is performed in its interface. To enter it, you must enter the address of the router on the local network in the address bar of any web browser that is used on the computer. Information about it is available on the label attached to the bottom of the product. Here you can find out the authorization parameters required at login.
The address required to configure TP Link TD W8151N Rostelecom is a combination of 192.168.1.1. After entering it and pressing the Enter key on the keyboard in the window that opens, you must enter the initial authorization data - admin / admin. The main page of the interface becomes available after clicking the "Login" button.
Quick setup
Depending on the firmware, the menus can be presented in different languages. Before configuring TP Link TD W8151N Rostelecom, it is recommended to change the administrator's factory password for security reasons. This can be done in the “Maintenance” section of the “Administrator” tab. It is required to come up with a new password and confirm it. After pressing the “Save” key, the router will reboot. The next login must be done with the new administrator password.
First you need to carefully familiarize yourself with the parameters prescribed in the contract. They will need to be entered when filling out the relevant pages. In the "Quick Start" section, press the "Setup Wizard" key. In the window that opens, the time zone is selected and the "Next" button is clicked. In the next step, it is necessary to note the type of connection provided by the provider. For ADSL, Rostelecom uses the PPPoE connection. After clicking the “Next” button on the page that opens, the fields marked in the contract are filled in: username; password; VPI / VCI; PPPoE LLC. Entering values ends by pressing the "Next" button.
In a new window, you must enter data that determines the operation of the wireless network. The name (SSID) is invented independently. The access password must contain a set of English letters of different registers, numbers and be at least 8 characters long (preferably 10-25). The remaining default values can be left unchanged. After entering the data, click the "Next" button. The next window informs about the end of the quick setup and suggests checking the entered parameter values. If there are no comments, then by clicking “Next” again, you can read the message about the successful completion of quick setup.
Interface setup
Setting up TP Link TD W8151N ADSL Rostelecom, performed in the Quick Start mode, covers all the parameters necessary for the router to work on the local network.
To check the settings made, go to the "Interface Settings" section using the "Internet" and "Wireless Network" tabs in it.
It may be necessary to change the values of the entered parameters in the “Internet” tab when changing the regional provider “Rostelecom” or when changing the service provider. It may be necessary to make changes to the “Wireless Network” tab if the mobile devices on the selected channel do not work in the “auto” mode, if you want to change the password for accessing the WI-FI network. The setup of TP Link TD W8151N Rostelecom can be started from this section, bypassing Quick Start.
Conclusion
Using the recommendations of the article in practice, the user will be able to successfully independently configure the TP Link TD W8151N Rostelecom router to work on the local network. The purchased device can successfully function as a modem and router for ADSL networks.