This article describes a key feature of UltraIso. A bootable flash drive is created with it without problems. It is the algorithm for performing this operation that will be considered later.
In what cases can one do without such a flash drive?
To begin with, we will decide on those cases when you can not do without this important feature of UltraIso. A bootable USB flash drive allows you to install an operating system on a computer that does not have a drive for reading and writing CDs. First of all, these are some models of ultrabooks and all netbooks. But, again, this does not mean that this method cannot be applied to a stationary personal computer (not on every system unit you can now find a device for reading CDs) or a laptop. In general, this is a universal solution for all cases. All modern computers, without exception, are equipped with a USB connector. So there will be no problems connecting the flash drive. At the same time, the installation speed of the operating system will be several times higher. Data from a flash drive is faster than transmitting from a CD. Therefore, this way of installing system software is the future.
Choose an image
Before you make a bootable flash drive UltraIso, you need to choose the correct installation version of the operating system. Its demo version can be downloaded from the Internet. In this case, it is recommended to use the * .iso format (that is, the file must have such an extension). If necessary, it can be made from a CD. To do this, install it in the drive, launch UltraIso, press “F8” and, following the instructions, create a copy of the installation version of the operating system on the hard disk. It is important that the source of the installer is with startup. Although rare, there are times when this important option is not available in the installation version. Therefore, it is necessary to pay attention to this.
Which version of the program is better?
UltraIso can be in two versions. The first one is demo and free. Some functions are not available in it, but the ability to create bootable flash drives is present. The second version is paid. She has more options, but to create such a flash drive, her purchase is not justified. Therefore, most users are advised to take exactly the first modification of UltraIso.
Install UltraIso
First you need to download and install UltraIso. Creating a bootable flash drive without this step is not possible. First you need to download this program from the official site. The remaining versions are not recommended for use, since their performance is poor. Then run the downloaded installer. Following the instructions of the wizard, install this program on your local computer. There is no need to perform any additional configuration to create a bootable drive. After that, UltraIso is ready to go.
Creating a bootable flash drive using UltraIso
How to create a bootable flash drive? After the installation is completed, the procedure for performing this operation will be as follows.
- We launch the program by double-clicking on the corresponding shortcut on the desktop.
- Using the combination of “Ctrl” and “O” and the file open window, we open the system image that was prepared in advance.
- Next, select the item "Self-loading" and in it we find "Burn the image of the hard disk."
- Then in the list you need to select a USB flash drive for installation, format it, set the file system and burn the image. Also do not forget to set the volume label. This will make it easier to identify it in BIOS in the next step.
At the end of the manipulations, you can consider the process completed, and now you can easily install the operating system from a flash drive. Do not forget that the size of the flash drive should be larger than the installer of the operating system. That is, if the image occupies 4.4 GB, then the drive in this case should be at least 8 GB. This nuance must be taken into account without fail. Otherwise, it will not be possible to create a bootable drive, and the operating system will display a message.
Preparing to install the operating system
At the next stage, you no longer have to use the UltraIso program. The bootable flash drive is ready. But in order to start the process of installing the operating system, you need to properly configure the BIOS of the personal computer. Install the prepared drive in any of the rectangular connectors of the personal computer. Next, when you turn it on, you need to pay attention to the inscription: Press X to setup. In this case, “X” will be the key that you need to press to enter the basic settings of the personal computer. If the motherboard manufacturer logo is displayed at the equipment testing stage, then press Esc. Not always the first time it turns out to find out the key to enter and have time to go into the BIOS. Therefore, if you did not have time to press, and the operating system started loading, then you need to restart the personal computer and repeat the operation of entering the basic settings, already knowing the necessary information. Then, using the navigation keys (arrows are shown on them), go to the Boot menu item. In it we find the item First Boot. Point the marker at it using the down arrow. At the next stage, using PgUp and PgDn, we indicate to the PC that the first source of download is, for example, a Windows 7 bootable USB flash drive. UltraIso has already placed the image on it and it is ready for the installation process. The volume label will be as previously set. As soon as this manipulation is completed, press F10. Then you should be prompted to save the changes. We respond to it positively. After that, the PC will restart and boot from the flash drive will begin.
Installation
The installation process from such an operating system drive is identical to the same procedure from the CD made in the same UltraIso program. The bootable USB flash drive is an exact copy of it. When starting the PC boot, press any key when the corresponding message appears. Then we set the language, country, currency and date format. Click "Next." At the next stage, click on “Install”. In the list of operating systems, select the one for which we have a key. Then we agree to the terms of the license agreement. To do this, select the checkbox at the bottom of the window and click the "Next" button. At the next stage, select the type of installation: full or update. Then select the logical partition on which the OS will be installed. If necessary, format it using the appropriate command. Further, all operations are performed automatically until you need to specify the name of the PC. Enter it and click "Next." If necessary, set a password for protection. Then enter the registration key. You can skip this step, but then you will have a trial version for 31 days. Then we select security settings, time and system date. Then we configure the local area network. At the final stage, drivers and application programs are installed.
Summary
This article describes one of the most important features of UltraIso. A bootable USB flash drive can be done with it without problems, and even a novice user can solve this problem. To do this, it is enough to follow the previously described actions, and you should have no problems with this procedure. So feel free to take and do.