Spinning Black Hole Hyper III has recently been in great demand. The form is made on a fibrous basis. The model is great for catching zander. The spinning reel is mounted with a wide stand. Directly, the balancer is made entirely of plastic. The spinning test parameter of this series is exactly 2 ounces. To understand this product in more detail, you need to consider its pros and cons.
Model benefits
The advantages of the Black Hole Hyper model include a hard case. The spinning blank is able to support the weight of a large fish. The whip bend in the model is negligible. If you trust the reviews of anglers, then feeder coils are installed quite simply. The base of the form is very strong. It is allowed to use accessories for 100 g. For fishing malm and char, the model fits well. The marking under the blank is made of fiberglass. The conductivity parameter is quite low.
Disadvantages of spinning
There are few drawbacks to this spinning. Some anglers say that the model will adopt a weak stance. The feeder coils at high loads begin to stop. In order to catch kaluga, the model is not the best fit. The holder for the coil is made of aluminum, and with a load of 2 N it can be deformed. The spinning gap parameter is not very high.
The blank stand may crack in some cases. Also, when using the specified spinning, it is important to monitor the condition of the rings. Another disadvantage is the high cost of goods, which is 5400 rubles. However, in this case, a lot depends on the selected model size.
Customer reviews
Many buyers find the Black Hall spinning rod great for sturgeon fishing. The stand of the model is very rarely erased. The coil turns normally. The latch on the model is installed without a clip. If you trust the reviews of anglers, then the rings are rarely erased.
However, it is important to note that the legs are not able to withstand heavy loads. The balance of the presented spinning is quite durable. The coil holder is locked normally and does not hang. The blank stand is made of Kevlar. Spinning screw holders are of medium quality.
Opinions of specialists
Specialists, as a rule, speak well of Black Hole Hyper spinning. First of all, they mark a quality form. It is produced in various lengths. In order to catch sturgeon, the model fits well. The spinning test is at a high level. Story for this modification is used quick type. Thus, whip bending does not occur abruptly. The protective layer of the model is made of high-quality fiberglass. If you trust the reviews of specialists, then the tensile resistance is quite high. The upper part of the form is treated with epoxy. Her electrical conductivity parameter is at around 2 microns. Directly protective ring is used ultra-light type. With vibration damping, the model does not often have problems. The blank holder is quite short. The latch has good balance. Directly the coil is able to boast of an excellent clamp. Mounts in the modification are made with a small protrusion. The spinning clamp washer is made of titanium. If you trust the reviews of experts, then the model is suitable for catching piskunov normally.
The clamping plate is fixed very firmly. 130 g accessories can be used without problems. The coil is firmly fixed and the screw holders are held well. Special attention at the spinning planting quality rings with legs. The degree of elasticity is very high.
1.3 meter modification
Spinning "Black Hall" at 1.3 meters, as a rule, is made with a short stand. For the purpose of catching crucian car, the model fits perfectly. If we talk about the benefits, it is important to mention the high quality of the mounting under the coil. The direct spinning test is 2 oz. The spread of this model is not very large. The lower part of the form is made with fiberglass protection.
The stand holder is made of titanium. Ring holders have good conductivity. The tube under the rack is made entirely of Kevlar. The diameter of the rings is 0.4 cm. For the purpose of catching Dallia, 1.3-meter spinning rods are great. The tensile strength of the blank is quite high. If we talk about the cons, it is important to mention the low strength of the clamping nut. There is a model of this type in the region of 4300 rubles.
1.5 meter spinning description
1.5 meter Black Hole Hyper Spinning has good bending resistance. If we talk about weaknesses, it is important to mention a bad holder. The form in this case is made of Kevlar. It is completely processed by epoxy resin. The ring holders of the modification have excellent conductivity. The ultimate breaking load parameter is quite high. The 1.5 meter spinning test is only 2.3 oz. If you trust the reviews of fishermen, then the model is suitable for catching Sints.
The Black Hole Hyper coil itself is mounted as standard on a flat plate. The clamping ring has a small diameter. If you trust the reviews of experts, it wears out very slowly. The balancer in this case is at the bottom of the form. The inertial reel of said spinning is capable of boasting a strong holder. The stubborn protrusion of her is not very large. The rack under the coil is made by the manufacturer with shockproof gasket. For the purpose of catching white-eyes, the model is not the best fit.
2 meter spinning
Black Hole Hyper Spinning (2 meters) is most often used for pike fishing. Equipment in this case can be used in various weights. If you trust the reviews of anglers, then the holders on the spinning rods have good stabilization. The mount for them is selected with a Kevlar coating. A 2 meter spinning test ranges around 3 ounces. The probability of damage to the forms is not very high.
It is also important to note that the models of this series are often used for sturgeon fishing. There is a holder at the base of the form. The protective plate on the model erases extremely slowly. However, disadvantages are also important to consider. First of all, anglers say that the model is not suitable for catching Dallia. Accessories per 100 g are not allowed. The casting accuracy of the model is not very high.
The upper part of the form is made without a seal. The thrust protrusion at the coil is quite small. If you trust customer reviews, the ring rarely breaks. The bend of the whip when fishing is small. The model stand is treated with epoxy. Thus, vibration damping is performed well.
2.5 meter model description
At 2.5 meters, the spinning Black Hole Hyper reviews are mostly positive. Anglers often use this model for catching crucian carp. It is allowed to use accessories weighing up to 200 g. The spinning test of this series is at the level of 2 ounces. If you trust the reviews of the angler, then the holders are used in high quality. Clips deserve special attention.
The rings at the base of the blank are able to withstand heavy loads. The armored handle is fixed to the stand quite firmly. According to anglers, the model is great for catching Dallia. The upper part of the form is treated with epoxy. The electrical conductivity of the indicated spinning by 2.5 meters is not very high.
3 meter customer reviews
Spinning Black Hole Hyper with a 3-meter blank is not in great demand. The form is installed with a standard Kevlar holder. If we talk about the features of the modification, it is important to note the high-quality inertial coil. The stand under it is made entirely of fiberglass and is not afraid of heavy loads. The spinning conductivity parameter of this series is not high. The persistent protrusion of the model is used at 2.2 cm.
3 meter spinning test - 3.3 oz. If you trust the reviews of anglers, then the lower holder is made with a quality ring. The clip of the modification is unlined. The lower part of the form is rarely taken to bend. In order to catch Sintz, the model is rarely used. Accessories weighing more than 130 g are not suitable for spinning. The casting accuracy in this case is not very high.