Almost every house has an electric kettle. Often, only the purchase purchased does not please the smell of plastic. Experience has shown that getting rid of this smell is easy enough. The main thing is to remember and apply some practical wisdom of home life.
The unpleasant smell of plastic appears due to various additives that are part of the plastic. Everyone knows that the more expensive the cost of an electric kettle, the more high-quality technical components were used in the production. Accordingly, they emit a specific smell less. So, how to get rid of the smell of plastic in an electric kettle quickly and easily?
Using lemon
One of the oldest and most proven ways to get rid of the unpleasant odor from a new electric kettle is to use lemon.
The most economical option is the use of citric acid. For a standard electric kettle, just prepare 2 sachets. How to get rid of the smell of plastic in an electric kettle? It is enough to pour water to the maximum mark and pour the contents of the bags into it. Power tool include. After the lemon water boils, the kettle is set aside for 14 hours. After the water has to be boiled again, drain and rinse thoroughly with running water.
An alternative is to use lemon juice or peel 3-4 citrus. The sequence of actions remains the same: pour water into the kettle, add lemon, boil, leave to brew and boil again. It is recommended to pour water through a nose. This will clean the outer surface of the plastic and the filter.
The acid contained in the lemon will clean the inside of the product well. Metal surfaces will be cleaned, will shine.
The advantages of this method include not only cost-effectiveness, but also environmental friendliness. Lemon or citric acid do not contain various chemicals, do not delay plaque and smell.
Please note that sometimes a solution of citric acid can corrode plastic parts in the joints. This can only happen with low quality teapots. High-quality, good plastic will not change under the action of a lemon solution even under conditions of prolonged and regular boiling.
How can I get rid of the smell of plastic in an electric kettle?
Carbonated drinks
Surprisingly, carbonated drinks can do a great job of eliminating bad odors in an electric kettle. Experienced housewives recommend using a lemon-based drink such as Sprite. Coca-Cola also copes with this problem very well.
How to get rid of the smell of plastic in an electric kettle with soda? It is enough to pour a drink in the container instead of ordinary water and turn on the device. It is necessary to boil the liquid several times. Between these procedures, the drink should cool.
After the container must be washed well under running water.
This method allows you to get rid not only of extraneous odors, but also of any technical fluids. Carbonated drinks eliminate oil residues well.
What is the secret? The fact is that carbonated sweet drinks include phosphoric acid (E338). This component allows you to clean the inside of the kettle well.
Bay leaf
Sometimes citric acid is not at hand, but packaging of bay leaf is in almost every kitchen. It also does not contain chemicals. Therefore, this is an environmentally friendly method that allows you to deal with the smell of plastic in an electric kettle.
Bay leaf allows you to quickly get rid of dyes and unpleasant odors of plastic compared to lemon. To do this, pour half the contents of the package into the kettle. Pour to the extreme mark with water and bring to a boil. After this, 1-1.5 hours the liquid should infuse. Bring to a boil again, drain the water and rinse well with running water.
After that, you must carefully inspect the inner surface of the appliance. Make sure that there are no twigs or pieces of leaf on the filter and on the walls. Otherwise, they will transmit the smell of laurel to the prepared drinks.
Experienced housewives recommend that after such a procedure, allow the kettle to weather.
How to get rid of the smell of plastic in an electric kettle using the improvised means that are in every kitchen?
Vinegar and soda solution in the fight against plastic odor
All housewives know that in the kitchen you can find a universal household cleaner - baking soda. This tool is not only effective, but also safe for health. This powder is often used for various purposes: for cleaning dishes, ashtrays from tobacco, plumbing. Baking soda is also actively used to remove the unpleasant odor of plastic in household appliances.
So, how to get rid of the smell of plastic in an electric kettle with soda? As in previous cases, it is necessary to draw water into the kettle to the maximum mark. Pour 3-4 large tablespoons of soda inward and mix until the powder is completely dissolved. Bring the water to a boil and let it brew for several hours. After repeatedly bring the water to a boil.
Baking soda is an alkali. It perfectly eliminates acidity. All specific odors also disappear after such treatment.
If it is not possible to use baking soda, you can take vinegar and vinegar essence. How to get rid of the smell of plastic in an electric kettle with this tool?
It is enough to fill in a teapot with water 2 tablespoons of acetic acid (70%) and 150 ml of vinegar (9%). It is necessary to carefully turn the kettle on and off so that the water does not reach a boil. After performing such manipulations, it is necessary to rinse the container thoroughly with running water.
These are the most effective ways to get rid of the smell of plastic in an electric kettle. They will help you enjoy a pleasant tea party almost immediately after your purchase.
Why does the electric kettle have an unpleasant smell of plastic?
These are the most effective and simplest odor control methods. But what is the essence of this problem?
The unpleasant odor does not come from plastic, but from the components that make up its composition - dyes and plasticizers. It is these substances that are capable of emitting unpleasant technical aromas. The instructions for household appliances often indicate that the user should boil 3 times in the kettle ordinary water. Bad breath, technical oils and other liquids must be removed.
The cause of an unpleasant technical smell can be different:
- If the kettle has a sharp unpleasant odor, this is a bad sign. This often indicates that low-quality components were used in the manufacture of electrical engineering. If after 3 boils the technical aroma did not disappear, and the above methods did not work, this may indicate a high content of plasticizers. Such a kettle does not disappear. It will be transmitted to various drinks, and chemical elements will enter the human body.
- An unpleasant odor can cause residual technical oil. They can be easily washed off with plain hot water.
- The unpleasant smell often comes from new household appliances that have been tightly packed. The aroma of dyes and other chemical components quickly disappears, and triple boiling should accurately eliminate it.
If there is an unpleasant odor in only the purchased electric kettle, you should eliminate it before the first tea party. Simple manipulations will fix this situation quickly and forever.
But what if the odors are not eliminated? The user must decide whether to return the goods to the store back or not.
When should the equipment be returned to the store?
Experts do not recommend using a kettle that does not disappear from the smell of plastic after applying all the above methods. If the purchase was made recently, you can contact the seller with a request to return the money or replace the product with a better one. Do not worry, consumers have their own rights, which must be protected and defended. After all, your health depends on it.
How to eliminate an unpleasant musty smell?
How to get rid of the smell in an electric kettle made of plastic, we already learned. But how to get rid of a musty smell? Often this aroma arises because the water has not been completely changed for a long time. Indeed, often the kettle is simply filled with liquid to a certain level and turned on again. Often this smell arises due to the presence of various impurities in the water supply. They leave scale on the heating element and sediment on the walls.
You can eliminate it with citric acid. To do this, add 50 g of substance to the filled container and turn on the kettle.
Sugar can also cope with this problem:
- pour 2 tablespoons of sugar at the bottom of an empty kettle;
- leave for 12 hours;
- thoroughly rinse the container with water and lemon juice.
Remember: you need to pour as much water into the kettle as you plan to use for tea or coffee. Leftovers must be poured into the sink. In this case, it is recommended to leave the electric kettle open. This excellent prevention of the appearance of a musty smell.
Smell after repair
Sometimes the electric kettle fails and must be returned to a service center. How to get rid of the smell of plastic in an electric kettle after repair? It is enough to use all the above methods. Indeed, during repair work, excess technical oil may accumulate inside the tank.
After boiling water with soda, citric acid or bay leaf, you can again enjoy aromatic coffee or tea by reading your favorite book.
Conclusion
An electric kettle is an indispensable attribute of modern life. It allows you to boil water in a matter of minutes, to brew tea. But only the acquired equipment is often not happy with its aroma. Getting rid of it is easy enough! The main thing is to immediately begin to eliminate this unpleasant odor.