Printer owners are constantly faced with the question: how to reset the cartridge Canon? The problem is the memory of the ink chip and the printing device. When a new cartridge is installed, the printer reads the information from the chip. The software displays the information that the installed ink tank is original and 100% full.
Refillable cartridges do not have such chips, because of this the printer cannot read information about the new ink tank and update the data in the software. Accordingly, the printing device “thinks” that the cartridge has not been replaced, and blocks use. The same situation is with owners using CISS.
The question of how to reset a Canon cartridge can arise when using inkless chips. Then, only printer software and one contact on the cartridge site are responsible for the volume of printed pages and the ink resource. In this case, the ink counter is also reset and you can print further.
Let's look at the main ways to reset cartridges in Canon printers, which include the following:
- using the programmer;
- blocking of the read contact;
- reset counter in printer.
Each printer model has its own zeroing option. Using the wrong method, the user runs the risk of incapacitating the printer, so remember that you take all actions at your own risk.
There is no chip in the cartridge: what to do?
How to reset a Canon cartridge that does not have a chip? There is no chip in the cartridge design, but there is a contact area that is recognized by the printer, and it reads information about which ink tank is installed and how much it has exhausted.
Optional kit
The most common trick that many use is to purchase two sets of cartridges and print in turn. Each subsequent ink tank resets information about the previous one. This method has a big minus, which is dangerous for those who rarely print. Ink cartridges do not stand idle, nozzles dry up and become worthless. If the cartridge is rarely used, start reading the instructions and follow the steps in order.
Action algorithm
How to reset the Canon cartridge after refilling? The result is guaranteed by following the instructions in sequence, first for a color cartridge, and then for black.
Take out the cartridge and tape over the top row of pins with tape or tape.
Insert the ink tank into the printer, the message “cartridge not inserted” appears.
Remove the print cartridge from the printer.
Tape the second row of contacts with tape (or electrical tape).
The “cartridge not inserted” error appears again.
Remove the cartridge again.
Tear off both strips of tape.
Insert the ink tank back, the printer will now detect the cartridge as full.
After this procedure, you can use them as new. Keep in mind that if the printer does not display a message about an empty cartridge, but simply prints white sheets, then the problem lies in poor-quality refueling or dried nozzles.
How to reset a Canon Pixma cartridge
This is a way to turn off the ink meter in the printer. Note that deactivation is written to the device’s memory and will invalidate the manufacturer’s warranty. The shutdown procedure is carried out only once and is irreversible.
- After installing a refilled cartridge, an Ink is running low error appears. Press the ok button in the notification window or out of paper - there is no paper.
- If nothing else appears, you can continue to work.
How do I reset a Canon cartridge if an Ink has run out error pops up?
- You need to click Yes in the window with this notification.
- A window should appear with the inscription Press and hold the Stop / Reset button, then hold down the Stop key (or a diamond, the color copy button for the MFP, or resume for simple printers) for about ten seconds until the window disappears.
- As soon as the message disappears, the printer resets to zero and starts printing.
How to reset a Canon cartridge using a programmer
The safest way to reset the chip is to use a special programmer. There are several types for different models of blueberries. Finding the right one is easy because there are many such offers on the market. The type of action they have is the same:
- Remove the cartridge from the printer.
- Install it in the programmer so that the chip lies on the contacts.
- As soon as the indicator lamp lights up, remove the ink tank.
- Return the cartridge to the printer and print.
Each of the described methods can be considered universal. For beginners, it is recommended to use the zeroing programmer or sticking contacts inkwell. These options will not void your warranty or service. Deactivate the counter if the warranty period of the printer is already over.