Carp hooks are an integral part of the equipment for catching this type of fish. Their main task is to ensure self-notching, while many other types of equipment are not assigned such functions.
What the result depends on
Carp fishing hooks today are available in various variations, they have different parameters, cost, and are produced by a variety of both Russian and foreign companies. This is the main difference between such products and devices for float equipment in fixing bait with the help of hair.
The effectiveness of the self-notch depends on many conditions, such as the size of the hook and the nozzle, the length of the thread, the material used for the leash and its length, the weight of the sinker, the design of the fishing gear, the literacy of their creation and compliance with the existing environmental conditions. A special role is played by the hook and its characteristics, in particular, dimensions, variety, sharpness, materials used for production, wire properties.
Required Extras
Any model must be equipped with a ring on the forend and have the sharpest sting possible. The ring is necessary for fixing with the “no-knot” method, which provides not only a strong and quick fixation, but also the use of the hair of the desired length for the nozzle. The specifics of carp fishing is such that if the fisherman does not let the fishing rod out of his hands and timely cuts the prey when the first signs of bite appear, then from the moment of biting and until the hooking takes place, it may take several seconds or several minutes.
Varieties
In specialized stores, as a rule, products are presented that have an eye with a bend in the inside. They are widespread due to their versatility and ability to use with most of the equipment. Such "Ovner" carp hooks are distinguished by a reliable serif provided that they are properly attached to the leash.
The greatest efficiency is achieved with the help of a “nodeless node”. The product scrolls during capture and is more reliable than the forearm. For suitable placement in a pond, it is best to use hard leashes. This forms the necessary angle between equipment and bait, which is so important when notching.
Direct carp hooks are less popular and are used, as a rule, for fishing at the surface of the water. The main feature is the placement of the product over the bait, so that it goes unnoticed by the carp. To increase the efficiency, many fishermen use thin tubes with a curved shape, so the way to orient the leash becomes similar to a curved version.
How to catch big fish
Devices with a forearm facing inward and having a great length are particularly effective. This is achieved due to a qualitative turn in the mouth of the carp, a similar option allows you to catch careful and large fish. But at the same time, it is considered rather traumatic for aquatic inhabitants. Such hooks for carp fishing are convenient in cluttered places with a high probability of hooks, provided that soft leashes of small length are added. A quick flip of the fixture reduces the chance of carp spitting.
It is believed that large fish are best caught with hooks that have a straight sting. At the same time, curved products are distinguished by a more tight fixation in the lip of the fish. Regardless of shape, the main thing is that the device is as strong and sharp as possible.
The principle of the hook also affects the shape of the tip. A direct sting clings best, but a shape with a bend to the inside has a higher tightening density in the lip. Also, they do not dull so quickly when used in a cluttered bottom, which is especially important if the surface is strewn with shells, gravel and other solid elements.
How to choose
Do not forget about such a characteristic as the width of the stock. With an insufficient size, the likelihood of descent increases, since cyprinids will cling to the edge of the lip. Too large a width is also undesirable, this contributes to an increase in the load and the likelihood of loss of production due to extension or breakage of the product.
The type of hook should be selected in accordance with the fishing conditions, which also include the anatomical features of individuals living in a particular reservoir. It is necessary to carefully examine the appearance of the lips of fish. In rivers and lakes with a soft bottom, the main diet of carps is bloodworms, which is why they have very thin soft lips. In reservoirs with a large amount of solid elements at the bottom and shells, which most often feed on fish, on the contrary, the lips are usually very rough. Do not forget about such features, so as not to increase the number of gatherings. Even the best carp hooks made of thick wire can be ineffective when notching, and do not pierce the hard lips of the fish, despite the excellent sharpening. At the same time as a small diameter wire product is most likely to be torn, the delicate lips of the aquatic creature will tear apart during the course of fishing.
Point
If the hook is sharp, then it will not slide over the nail even with minimal pressure. The sting should have a completely smooth side surface, without mechanical flaws, damage to the coating and burrs. To make sure that there are no defects, you need to slide your finger along the side of the tip.
If there is damage or insufficient sharpness, the product must be discarded, and it should be noted that fishing gear should be stored in places inaccessible to children and pets.
Sizes of carp hooks
As such, dimensional single numbering does not exist. The values reflect only the approximate dimensions of the product itself, and not the parameters of individual elements. All manufacturers use various dimensional nets and standard markings. The only common nuance is that the dimensions of the product decrease with increasing value.
Among fishermen who are fond of fishing for carps, hooks with a size of 2 to 8 are common. Other options are used much less often.
Proportionality of equipment
Among the important features of successful fishing, it is worth noting the conformity of the sizes of the used nozzle and hooks. As nozzle dimensions increase, a larger tool should be used to reduce the likelihood of gathering. Moreover, if you use a large nozzle and a small hook, there will be more difficulties than when working with a small nozzle and a large hook.
Despite the advantages, devices with a long forearm, which provide high-quality serif, they become less useful when fishing for prey - with an increase in the forearm, the mechanical effect on the carp’s lip also becomes greater, and, as a result, the risk of vanishing even with minimal weakening of the thread increases.
The use of a tube of heat-shrink material for lengthening the sting allows you to combine the positive sides of devices with a small forearm and products with a long element in the process of fishing and notching. In addition, carp hooks, called “banana”, cause significant damage to the inhabitants due to frequent double cutting.